[Wed Jun 12 13:49:07 2013] Detection parameters:
  Position = (232.0, 287.1) = 10 7 48.63 12 46 31.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 108.1 +/- 13.9
  Background counts = 14.9
  Rate = 0.009 +/- 0.001

[Wed Jun 12 13:49:08 2013] Off-axis axis estimate = 4.88'
[Wed Jun 12 13:49:33 2013] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 13:49:33 2013] Initial guess for spatial extent in simple fitting = 8.87"
[Wed Jun 12 13:49:33 2013] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.163
[Wed Jun 12 13:49:33 2013] Giving source the simple spatial ID 46 for pass 0, mean size = 8.87"
[Wed Jun 12 13:49:35 2013] fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_src46.ximg exists
[Wed Jun 12 13:49:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_src46.csv
[Wed Jun 12 13:49:35 2013] fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_src46_1.ximg exists
[Wed Jun 12 13:49:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_src46.csv
[Wed Jun 12 13:49:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 13:49:36 2013] fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Wed Jun 12 13:49:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src46.csv
[Wed Jun 12 13:49:36 2013] fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Wed Jun 12 13:49:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src46.csv
[Wed Jun 12 13:49:36 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 13:49:50 2013] Source 46 is offset by -2.541289 and 2.519029 pixels which is larger than
2 X fitted extent = 1.445545 x 1.445545, not incorporating fit results
[Wed Jun 12 13:49:50 2013] Warning, spatial fit 46 centroid is now closest to src. 9
[Wed Jun 12 13:49:50 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 13:49:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 13:49:50 2013] Assessing source extent using major
[Wed Jun 12 13:49:50 2013] Source does appear to be extended
[Wed Jun 12 13:49:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 13:50:12 2013] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 13:50:12 2013] Initial guess for spatial extent in simple fitting = 8.87"
[Wed Jun 12 13:50:12 2013] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.163
[Wed Jun 12 13:50:12 2013] Giving source the simple spatial ID 46 for pass 1, mean size = 8.87"
[Wed Jun 12 13:50:13 2013] fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_src46.ximg exists
[Wed Jun 12 13:50:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_src46.csv
[Wed Jun 12 13:50:13 2013] fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_src46_1.ximg exists
[Wed Jun 12 13:50:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_src46.csv
[Wed Jun 12 13:50:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 13:50:14 2013] fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Wed Jun 12 13:50:14 2013] fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Wed Jun 12 13:50:14 2013] Fit fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src46 appears to have run properly
[Wed Jun 12 13:50:27 2013] Spatial fit model total counts = 259.629000, observed total counts = 239.000000
[Wed Jun 12 13:50:27 2013] Offset between fit and detection position for source 46 = 0.055247 pixels
[Wed Jun 12 13:50:27 2013] 260.719500 total counts/ 184.111000 bgd. counts: snr = 5.645951
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 0.055247 pixels
  Position = (232.0, 287.1) = 10 7 48.64 12 46 30.3
  Extent = 5.8 (4.3-7.2)", rotation angle = 0
  Source counts = 76.6 +/- 16.1
  Background counts = 184.1
  Rate = 0.004 +/- 0.0008
[Wed Jun 12 13:50:27 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 13:50:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 13:50:27 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 13:50:27 2013] Source does appear to be extended
[Wed Jun 12 13:50:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 13:50:49 2013] XMMSAS src. selection expression = ellipse(20135.000082, 24931.855200, 348.805751, 348.805751, 0.000000, X, Y)
[Wed Jun 12 13:50:49 2013] Not overwriting source region fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src46_src.reg
[Wed Jun 12 13:50:49 2013] Extracting stamp from image fullrun_pn_xmm0140550601_pi300-10000_cl_sm2.00.img.gz, (212, 267) - (252, 307)
[Wed Jun 12 13:50:49 2013] XMMSAS bgd. selection expression = annulus(20135.000082, 24931.855200, 581.342918, 1162.685837, X, Y) && !ellipse(19389.278793, 23623.605804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18788.156600, 25594.775600, 506.780015, 506.780015, 0.000000, X, Y)
[Wed Jun 12 13:50:49 2013] Writing fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src46.gif
[Wed Jun 12 13:56:03 2013] Mean detx,y = (-6930.01, 1339.56) 
[Wed Jun 12 13:56:05 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 13:56:23 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 13:56:24 2013] Setting source spectrum file to fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Wed Jun 12 13:56:24 2013] Setting bgd. spectrum file to fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Wed Jun 12 14:15:41 2013] Not generating rmf since there are only 76 counts
[Wed Jun 12 14:15:41 2013] rmf not generated due to insufficient counts
[Wed Jun 12 15:06:20 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:06:20 2013] Total counts from fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src46_src_b10.pi.gz = 114.00
[Wed Jun 12 15:06:21 2013] Total counts from fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src46_bgd.pi.gz = 189.00
[Wed Jun 12 15:06:21 2013] Got source and background scale factors 382400.000000, 2424259.000000
[Wed Jun 12 15:06:21 2013] User source parameters:
  Position = (232.0, 287.1) = 10 7 48.64 12 46 30.3
  Extent = 5.8 (4.3-7.2)", rotation angle = 0
  Source aperture counts = 84.2 +/- 11.7
  Background aperture counts = 29.8
  Rate = 0.004 +/- 0.0006

[Wed Jun 12 15:06:23 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:06:23 2013] Using photon index=1.80, rate=0.00381, arf fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src46.arf
[Wed Jun 12 15:06:23 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:06:23 2013] Updating source flux to 2e-14
[Wed Jun 12 15:06:36 2013] Flag b found in src. 46 procflags, skipping spectral fitting
[Wed Jun 12 15:06:36 2013] Source 46 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jun 12 15:06:37 2013] xmm0140550601/analysis//spectral/fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src46_pl.csv not found, spectral fit skipped or did not complete