[Wed Jun 12 13:49:07 2013] Detection parameters:
  Position = (371.4, 347.2) = 10 7 7.19 12 50 49.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.1 +/- 11.2
  Background counts = 15.8
  Rate = 0.005 +/- 0.0008

[Wed Jun 12 13:49:08 2013] Off-axis axis estimate = 6.36'
[Wed Jun 12 13:49:33 2013] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 13:49:33 2013] Initial guess for spatial extent in simple fitting = 9.61"
[Wed Jun 12 13:49:33 2013] source mask rpix=2.2, npix_max = 29, mask sum = 23, frac = 0.784
[Wed Jun 12 13:49:33 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 9.61"
[Wed Jun 12 13:49:34 2013] fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_src30.ximg exists
[Wed Jun 12 13:49:34 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_src30.csv
[Wed Jun 12 13:49:34 2013] fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_src30_1.ximg exists
[Wed Jun 12 13:49:34 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_src30.csv
[Wed Jun 12 13:49:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 13:49:35 2013] fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Wed Jun 12 13:49:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src30.csv
[Wed Jun 12 13:49:35 2013] fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Wed Jun 12 13:49:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src30.csv
[Wed Jun 12 13:49:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 13:49:50 2013] Warning, spatial fit 30 centroid is now closest to src. 32
[Wed Jun 12 13:49:50 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 13:49:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 13:49:50 2013] Assessing source extent using major
[Wed Jun 12 13:49:50 2013] Source does appear to be extended
[Wed Jun 12 13:49:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 13:50:12 2013] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 13:50:12 2013] Initial guess for spatial extent in simple fitting = 9.61"
[Wed Jun 12 13:50:12 2013] source mask rpix=2.2, npix_max = 29, mask sum = 23, frac = 0.784
[Wed Jun 12 13:50:12 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 9.61"
[Wed Jun 12 13:50:13 2013] fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_src30.ximg exists
[Wed Jun 12 13:50:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_src30.csv
[Wed Jun 12 13:50:13 2013] fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_src30_1.ximg exists
[Wed Jun 12 13:50:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_src30.csv
[Wed Jun 12 13:50:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 13:50:14 2013] fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Wed Jun 12 13:50:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src30.csv
[Wed Jun 12 13:50:14 2013] fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Wed Jun 12 13:50:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src30.csv
[Wed Jun 12 13:50:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 13:50:26 2013] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 12.711152 pixels away
[Wed Jun 12 13:50:27 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 13:50:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 13:50:27 2013] Assessing source extent using major
[Wed Jun 12 13:50:27 2013] Source does appear to be extended
[Wed Jun 12 13:50:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 13:50:49 2013] XMMSAS src. selection expression = ellipse(32259.184174, 30156.018646, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 12 13:50:49 2013] Not overwriting source region fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src30_src.reg
[Wed Jun 12 13:50:49 2013] Extracting stamp from image fullrun_pn_xmm0140550601_pi300-10000_cl_sm2.00.img.gz, (334, 310) - (409, 385)
[Wed Jun 12 13:50:49 2013] XMMSAS bgd. selection expression = annulus(32259.184174, 30156.018646, 1087.500000, 2175.000000, X, Y) && !ellipse(31483.740000, 32700.065800, 390.313611, 390.313611, 0.000000, X, Y) && !ellipse(32491.462067, 32054.781433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30144.968414, 31288.813446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31045.252400, 30040.066800, 393.563211, 353.733610, 65.725000, X, Y) && !ellipse(34553.971130, 28618.661102, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 13:50:49 2013] Writing fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src30.gif
[Wed Jun 12 13:50:52 2013] ../../xmm0140550601/products/events/fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src30_src.evt and ../../xmm0140550601/products/events/fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src30_bgd.evt exist, delete to re-create
[Wed Jun 12 13:50:52 2013] Mean detx,y = (5966.78, -1535.11) 
[Wed Jun 12 13:50:52 2013] ../../xmm0140550601/products/images/fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src30_src.img and ../../xmm0140550601/products/images/fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src30_bgd.img exist, delete to re-create
[Wed Jun 12 13:50:52 2013] ../../xmm0140550601/products/spectra/fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src30_src.pi and ../../xmm0140550601/products/spectra/fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src30_bgd.pi exist, delete to re-create
[Wed Jun 12 13:50:52 2013] Setting source spectrum file to fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src30_src.pi.gz
[Wed Jun 12 13:50:52 2013] Setting bgd. spectrum file to fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Wed Jun 12 13:50:52 2013] ../../xmm0140550601/products/lightcurves/fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src30_src.lc and ../../xmm0140550601/products/lightcurves/fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src30_bgd.lc exist, delete to re-create
[Wed Jun 12 14:04:01 2013] Not generating rmf since there are only 71 counts
[Wed Jun 12 14:04:01 2013] rmf not generated due to insufficient counts
[Wed Jun 12 15:06:18 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:06:18 2013] Total counts from fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src30_src.pi.gz = 152.00
[Wed Jun 12 15:06:18 2013] Total counts from fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src30_bgd.pi.gz = 630.00
[Wed Jun 12 15:06:18 2013] Got source and background scale factors 1087670.000000, 7303389.000000
[Wed Jun 12 15:06:18 2013] User source parameters:
  Position = (371.4, 347.2) = 10 7 7.19 12 50 49.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 58.2 +/- 13.4
  Background aperture counts = 93.8
  Rate = 0.003 +/- 0.0007

[Wed Jun 12 15:06:18 2013] Updating counts from extracted products
[Wed Jun 12 15:06:18 2013] Set source signif. to 58.18/9.69 = 6.01
[Wed Jun 12 15:06:23 2013] No arf file for this source, not re-computing flux
[Wed Jun 12 15:06:36 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 12 15:06:37 2013] xmm0140550601/analysis//spectral/fullrun_pn_xmm0140550601_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete