[Wed Jun 12 13:49:10 2013] Detection parameters:
  Position = (260.3, 194.9) = 10 7 40.22 12 39 48.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.4 +/- 8.7
  Background counts = 4.7
  Rate = 0.004 +/- 0.0008

[Wed Jun 12 13:49:10 2013] Off-axis axis estimate = 8.00'
[Wed Jun 12 13:49:37 2013] Using EEF radius (= 10.43 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 13:49:37 2013] Initial guess for spatial extent in simple fitting = 10.43"
[Wed Jun 12 13:49:37 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.072
[Wed Jun 12 13:49:37 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 10.43"
[Wed Jun 12 13:49:38 2013] fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_src13.ximg exists
[Wed Jun 12 13:49:38 2013] fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_src13_1.ximg exists
[Wed Jun 12 13:49:38 2013] Fit fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_src13 appears to have run properly
[Wed Jun 12 13:49:38 2013] fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Wed Jun 12 13:49:38 2013] fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Wed Jun 12 13:49:38 2013] Fit fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Wed Jun 12 13:49:59 2013] Spatial fit model total counts = 78.993400, observed total counts = 79.000000
[Wed Jun 12 13:49:59 2013] Offset between fit and detection position for source 30 = 0.163539 pixels
[Wed Jun 12 13:49:59 2013] 78.827900 total counts/ 48.710700 bgd. counts: snr = 4.315215
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.163539 pixels
  Position = (260.2, 194.8) = 10 7 40.25 12 39 48.7
  Extent = 5.0 (3.3-7.0)", rotation angle = 0
  Source counts = 30.1 +/- 8.9
  Background counts = 48.7
  Rate = 0.001 +/- 0.0004
[Wed Jun 12 13:49:59 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 13:49:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 13:49:59 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 13:49:59 2013] Source does appear to be extended
[Wed Jun 12 13:49:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 13:50:15 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 12 13:50:15 2013] Initial guess for spatial extent in simple fitting = 4.98"
[Wed Jun 12 13:50:15 2013] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.832
[Wed Jun 12 13:50:15 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 4.98"
[Wed Jun 12 13:50:16 2013] fullrun_mos2_xmm0140550601_pi300-10000_cl_pass1_src13.ximg exists
[Wed Jun 12 13:50:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0140550601_pi300-10000_cl_pass1_src13.csv
[Wed Jun 12 13:50:16 2013] fullrun_mos2_xmm0140550601_pi300-10000_cl_pass1_src13_1.ximg exists
[Wed Jun 12 13:50:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0140550601_pi300-10000_cl_pass1_src13.csv
[Wed Jun 12 13:50:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0140550601_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0140550601_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 13:50:16 2013] fullrun_mos2_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Wed Jun 12 13:50:16 2013] fullrun_mos2_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Wed Jun 12 13:50:16 2013] Fit fullrun_mos2_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Wed Jun 12 13:50:37 2013] Spatial fit model total counts = 80.297700, observed total counts = 79.000000
[Wed Jun 12 13:50:37 2013] Offset between fit and detection position for source 30 = 0.035513 pixels
[Wed Jun 12 13:50:37 2013] 80.144200 total counts/ 49.134500 bgd. counts: snr = 4.423890
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.035513 pixels
  Position = (260.2, 194.8) = 10 7 40.24 12 39 48.7
  Extent = 4.8 (3.3-7.0)", rotation angle = 0
  Source counts = 31.0 +/- 9.0
  Background counts = 49.1
  Rate = 0.001 +/- 0.0004
[Wed Jun 12 13:50:37 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 13:50:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 13:50:37 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 13:50:37 2013] Source does appear to be extended
[Wed Jun 12 13:50:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 14:45:26 2013] XMMSAS src. selection expression = ellipse(22589.910440, 16900.270000, 290.548808, 290.548808, 0.000000, X, Y)
[Wed Jun 12 14:45:26 2013] Writing source region out to fullrun_mos2_xmm0140550601_pi300-10000_pass1_cl_src30_src.reg
[Wed Jun 12 14:45:26 2013] Extracting stamp from image fullrun_mos2_xmm0140550601_pi300-10000_cl_sm2.00.img.gz, (244, 178) - (277, 212)
[Wed Jun 12 14:45:26 2013] XMMSAS bgd. selection expression = annulus(22589.910440, 16900.270000, 484.248014, 968.496028, X, Y) && !ellipse(24115.603973, 18629.498352, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 14:45:26 2013] Writing fullrun_mos2_xmm0140550601_pi300-10000_pass1_cl_src30.gif
[Wed Jun 12 14:47:17 2013] Mean detx,y = (6102.76, -9892.05) 
[Wed Jun 12 14:47:18 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 14:47:22 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 14:47:22 2013] Setting source spectrum file to fullrun_mos2_xmm0140550601_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Wed Jun 12 14:47:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0140550601_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Wed Jun 12 15:04:59 2013] Not generating rmf since there are only 31 counts
[Wed Jun 12 15:04:59 2013] rmf not generated due to insufficient counts
[Wed Jun 12 15:06:27 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:06:27 2013] Total counts from fullrun_mos2_xmm0140550601_pi300-10000_pass1_cl_src30_src_b10.pi.gz = 37.00
[Wed Jun 12 15:06:27 2013] Total counts from fullrun_mos2_xmm0140550601_pi300-10000_pass1_cl_src30_bgd.pi.gz = 49.00
[Wed Jun 12 15:06:28 2013] Got source and background scale factors 265600.000000, 2209600.000000
[Wed Jun 12 15:06:28 2013] User source parameters:
  Position = (260.2, 194.8) = 10 7 40.24 12 39 48.7
  Extent = 4.8 (3.3-7.0)", rotation angle = 0
  Source aperture counts = 31.1 +/- 7.1
  Background aperture counts = 5.9
  Rate = 0.001 +/- 0.0003

[Wed Jun 12 15:06:29 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:06:29 2013] Using photon index=1.80, rate=0.00143, arf fullrun_mos2_xmm0140550601_pi300-10000_pass1_cl_src30.arf
[Wed Jun 12 15:06:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:06:29 2013] Updating source flux to 3.6e-14
[Wed Jun 12 15:06:34 2013] Source 30 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jun 12 15:06:36 2013] xmm0140550601/analysis//spectral/fullrun_mos2_xmm0140550601_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete