[Wed Jun 12 13:49:10 2013] Detection parameters:
  Position = (144.4, 348.0) = 10 8 14.71 12 50 56.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.5 +/- 12.6
  Background counts = 4.0
  Rate = 0.005 +/- 0.0006

[Wed Jun 12 13:49:10 2013] Off-axis axis estimate = 11.73'
[Wed Jun 12 13:49:37 2013] Using EEF radius (= 12.30 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 13:49:37 2013] Initial guess for spatial extent in simple fitting = 12.30"
[Wed Jun 12 13:49:37 2013] source mask rpix=2.8, npix_max = 44, mask sum = 39, frac = 0.881
[Wed Jun 12 13:49:37 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 12.30"
[Wed Jun 12 13:49:38 2013] fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_src11.ximg exists
[Wed Jun 12 13:49:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_src11.csv
[Wed Jun 12 13:49:38 2013] fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Jun 12 13:49:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_src11.csv
[Wed Jun 12 13:49:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 13:49:38 2013] fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Jun 12 13:49:38 2013] fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Jun 12 13:49:38 2013] Fit fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Jun 12 13:49:59 2013] Spatial fit model total counts = 132.932000, observed total counts = 129.000000
[Wed Jun 12 13:49:59 2013] Offset between fit and detection position for source 16 = 0.167794 pixels
[Wed Jun 12 13:49:59 2013] 132.129800 total counts/ 59.348000 bgd. counts: snr = 9.447562
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.167794 pixels
  Position = (144.4, 348.2) = 10 8 14.69 12 50 55.6
  Extent = 5.4 (4.2-6.8)", rotation angle = 0
  Source counts = 72.8 +/- 11.5
  Background counts = 59.3
  Rate = 0.003 +/- 0.0005
[Wed Jun 12 13:49:59 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 13:49:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 13:49:59 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 13:49:59 2013] Source does appear to be extended
[Wed Jun 12 13:49:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 13:50:15 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 12 13:50:15 2013] Initial guess for spatial extent in simple fitting = 5.43"
[Wed Jun 12 13:50:15 2013] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.981
[Wed Jun 12 13:50:15 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 5.43"
[Wed Jun 12 13:50:16 2013] fullrun_mos2_xmm0140550601_pi300-10000_cl_pass1_src11.ximg exists
[Wed Jun 12 13:50:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0140550601_pi300-10000_cl_pass1_src11.csv
[Wed Jun 12 13:50:16 2013] fullrun_mos2_xmm0140550601_pi300-10000_cl_pass1_src11_1.ximg exists
[Wed Jun 12 13:50:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0140550601_pi300-10000_cl_pass1_src11.csv
[Wed Jun 12 13:50:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0140550601_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0140550601_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 13:50:16 2013] fullrun_mos2_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Wed Jun 12 13:50:16 2013] fullrun_mos2_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Wed Jun 12 13:50:16 2013] Fit fullrun_mos2_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Wed Jun 12 13:50:37 2013] Spatial fit model total counts = 125.695000, observed total counts = 122.000000
[Wed Jun 12 13:50:37 2013] Offset between fit and detection position for source 16 = 0.009302 pixels
[Wed Jun 12 13:50:37 2013] 125.278300 total counts/ 52.793000 bgd. counts: snr = 9.976122
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.009302 pixels
  Position = (144.4, 348.2) = 10 8 14.69 12 50 55.6
  Extent = 5.4 (4.2-6.8)", rotation angle = 0
  Source counts = 72.5 +/- 11.2
  Background counts = 52.8
  Rate = 0.003 +/- 0.0005
[Wed Jun 12 13:50:37 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 13:50:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 13:50:37 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 13:50:37 2013] Source does appear to be extended
[Wed Jun 12 13:50:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 14:45:26 2013] XMMSAS src. selection expression = ellipse(12515.896600, 30242.149200, 324.827409, 324.827409, 0.000000, X, Y)
[Wed Jun 12 14:45:26 2013] Writing source region out to fullrun_mos2_xmm0140550601_pi300-10000_pass1_cl_src16_src.reg
[Wed Jun 12 14:45:26 2013] Extracting stamp from image fullrun_mos2_xmm0140550601_pi300-10000_cl_sm2.00.img.gz, (126, 330) - (163, 367)
[Wed Jun 12 14:45:26 2013] XMMSAS bgd. selection expression = annulus(12515.896600, 30242.149200, 541.379016, 1082.758031, X, Y) && !ellipse(12130.605255, 28582.340302, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 14:45:26 2013] Writing fullrun_mos2_xmm0140550601_pi300-10000_pass1_cl_src16.gif
[Wed Jun 12 14:47:05 2013] Mean detx,y = (13587.70, 5068.87) 
[Wed Jun 12 14:47:05 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 14:47:10 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 14:47:10 2013] Setting source spectrum file to fullrun_mos2_xmm0140550601_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed Jun 12 14:47:10 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0140550601_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Wed Jun 12 15:04:53 2013] Not generating rmf since there are only 72 counts
[Wed Jun 12 15:04:53 2013] rmf not generated due to insufficient counts
[Wed Jun 12 15:06:27 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:06:27 2013] Total counts from fullrun_mos2_xmm0140550601_pi300-10000_pass1_cl_src16_src_b10.pi.gz = 84.00
[Wed Jun 12 15:06:27 2013] Total counts from fullrun_mos2_xmm0140550601_pi300-10000_pass1_cl_src16_bgd.pi.gz = 78.00
[Wed Jun 12 15:06:27 2013] Got source and background scale factors 307632.000000, 2423112.000000
[Wed Jun 12 15:06:27 2013] User source parameters:
  Position = (144.4, 348.2) = 10 8 14.69 12 50 55.6
  Extent = 5.4 (4.2-6.8)", rotation angle = 0
  Source aperture counts = 74.1 +/- 10.2
  Background aperture counts = 9.9
  Rate = 0.003 +/- 0.0005

[Wed Jun 12 15:06:29 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:06:29 2013] Using photon index=1.80, rate=0.00334, arf fullrun_mos2_xmm0140550601_pi300-10000_pass1_cl_src16.arf
[Wed Jun 12 15:06:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:06:29 2013] Updating source flux to 1.3e-13
[Wed Jun 12 15:06:34 2013] Source 16 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jun 12 15:06:36 2013] xmm0140550601/analysis//spectral/fullrun_mos2_xmm0140550601_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete