[Wed Jun 12 13:49:10 2013] Detection parameters: Position = (249.8, 347.3) = 10 7 43.35 12 50 53.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 45.6 +/- 8.8 Background counts = 5.1 Rate = 0.003 +/- 0.0005 [Wed Jun 12 13:49:10 2013] Off-axis axis estimate = 5.00' [Wed Jun 12 13:49:37 2013] Using EEF radius (= 8.93 ")to estimate initial spatial extent for simple fitting [Wed Jun 12 13:49:37 2013] Initial guess for spatial extent in simple fitting = 8.93" [Wed Jun 12 13:49:37 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.959 [Wed Jun 12 13:49:37 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 8.93" [Wed Jun 12 13:49:38 2013] fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_src20.ximg exists [Wed Jun 12 13:49:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_src20.csv [Wed Jun 12 13:49:38 2013] fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_src20_1.ximg exists [Wed Jun 12 13:49:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_src20.csv [Wed Jun 12 13:49:38 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_src20_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Jun 12 13:49:38 2013] fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src20.ximg exists [Wed Jun 12 13:49:38 2013] fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists [Wed Jun 12 13:49:38 2013] Fit fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly [Wed Jun 12 13:49:59 2013] Spatial fit model total counts = 86.000000, observed total counts = 86.000000 [Wed Jun 12 13:49:59 2013] Offset between fit and detection position for source 15 = 0.204706 pixels [Wed Jun 12 13:49:59 2013] 85.435100 total counts/ 55.620200 bgd. counts: snr = 3.997763 Spatial fit parameters: Offset between fit and detection position for source 15 = 0.204706 pixels Position = (249.6, 347.3) = 10 7 43.41 12 50 52.0 Extent = 4.5 (3.4-5.8)", rotation angle = 0 Source counts = 29.8 +/- 9.2 Background counts = 55.6 Rate = 0.001 +/- 0.0004 [Wed Jun 12 13:49:59 2013] Vigneting correction estimate = 1.000000 [Wed Jun 12 13:49:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 12 13:49:59 2013] Assessing source extent using major axis lower bound [Wed Jun 12 13:49:59 2013] Source does appear to be extended [Wed Jun 12 13:49:59 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 12 13:50:15 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Wed Jun 12 13:50:15 2013] Initial guess for spatial extent in simple fitting = 4.48" [Wed Jun 12 13:50:15 2013] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.963 [Wed Jun 12 13:50:15 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 4.48" [Wed Jun 12 13:50:16 2013] fullrun_mos2_xmm0140550601_pi300-10000_cl_pass1_src20.ximg exists [Wed Jun 12 13:50:16 2013] fullrun_mos2_xmm0140550601_pi300-10000_cl_pass1_src20_1.ximg exists [Wed Jun 12 13:50:16 2013] Fit fullrun_mos2_xmm0140550601_pi300-10000_cl_pass1_src20 appears to have run properly [Wed Jun 12 13:50:16 2013] fullrun_mos2_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src20.ximg exists [Wed Jun 12 13:50:16 2013] fullrun_mos2_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists [Wed Jun 12 13:50:16 2013] Fit fullrun_mos2_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly [Wed Jun 12 13:50:37 2013] Spatial fit model total counts = 85.999800, observed total counts = 86.000000 [Wed Jun 12 13:50:37 2013] Offset between fit and detection position for source 15 = 0.000229 pixels [Wed Jun 12 13:50:37 2013] 85.435000 total counts/ 55.621100 bgd. counts: snr = 3.997597 Spatial fit parameters: Offset between fit and detection position for source 15 = 0.000229 pixels Position = (249.6, 347.3) = 10 7 43.41 12 50 52.0 Extent = 4.5 (3.4-5.8)", rotation angle = 0 Source counts = 29.8 +/- 9.2 Background counts = 55.6 Rate = 0.001 +/- 0.0004 [Wed Jun 12 13:50:37 2013] Vigneting correction estimate = 1.000000 [Wed Jun 12 13:50:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Jun 12 13:50:37 2013] Assessing source extent using major axis lower bound [Wed Jun 12 13:50:37 2013] Source does appear to be extended [Wed Jun 12 13:50:37 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Jun 12 14:45:26 2013] XMMSAS src. selection expression = ellipse(21664.896000, 30166.025000, 268.503325, 268.503325, 0.000000, X, Y) [Wed Jun 12 14:45:26 2013] Writing source region out to fullrun_mos2_xmm0140550601_pi300-10000_pass1_cl_src15_src.reg [Wed Jun 12 14:45:26 2013] Extracting stamp from image fullrun_mos2_xmm0140550601_pi300-10000_cl_sm2.00.img.gz, (234, 332) - (265, 363) [Wed Jun 12 14:45:26 2013] XMMSAS bgd. selection expression = annulus(21664.896000, 30166.025000, 447.505541, 895.011082, X, Y) [Wed Jun 12 14:45:26 2013] Writing fullrun_mos2_xmm0140550601_pi300-10000_pass1_cl_src15.gif [Wed Jun 12 14:48:20 2013] Mean detx,y = (4602.17, 3322.63) [Wed Jun 12 14:48:20 2013] Setting backscal keywords in source and bgd. spectrum [Wed Jun 12 14:48:27 2013] Binned source spectrum to 10 counts/bin [Wed Jun 12 14:48:27 2013] Setting source spectrum file to fullrun_mos2_xmm0140550601_pi300-10000_pass1_cl_src15_src_b10.pi.gz [Wed Jun 12 14:48:27 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0140550601_pi300-10000_pass1_cl_src15_bgd.pi.gz [Wed Jun 12 15:05:20 2013] Not generating rmf since there are only 29 counts [Wed Jun 12 15:05:20 2013] rmf not generated due to insufficient counts [Wed Jun 12 15:06:28 2013] Updating aperture counts using extracted products [Wed Jun 12 15:06:28 2013] Total counts from fullrun_mos2_xmm0140550601_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 35.00 [Wed Jun 12 15:06:28 2013] Total counts from fullrun_mos2_xmm0140550601_pi300-10000_pass1_cl_src15_bgd.pi.gz = 54.00 [Wed Jun 12 15:06:28 2013] Got source and background scale factors 225600.000000, 1892800.000000 [Wed Jun 12 15:06:28 2013] User source parameters: Position = (249.6, 347.3) = 10 7 43.41 12 50 52.0 Extent = 4.5 (3.4-5.8)", rotation angle = 0 Source aperture counts = 28.6 +/- 7.0 Background aperture counts = 6.4 Rate = 0.001 +/- 0.0003 [Wed Jun 12 15:06:29 2013] Calculating source flux in energy range 0.30-8.00 [Wed Jun 12 15:06:29 2013] Using photon index=1.80, rate=0.00137, arf fullrun_mos2_xmm0140550601_pi300-10000_pass1_cl_src15.arf [Wed Jun 12 15:06:29 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed Jun 12 15:06:29 2013] Updating source flux to 2.5e-14 [Wed Jun 12 15:06:34 2013] Source 15 has fewer than 100.000000 counts, skipping spectral fitting [Wed Jun 12 15:06:36 2013] xmm0140550601/analysis//spectral/fullrun_mos2_xmm0140550601_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete