[Wed Jun 12 13:49:09 2013] Detection parameters:
  Position = (307.7, 320.7) = 10 7 26.11 12 48 55.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 747.6 +/- 32.5
  Background counts = 6.0
  Rate = 0.04 +/- 0.002

[Wed Jun 12 13:49:10 2013] Off-axis axis estimate = 1.75'
[Wed Jun 12 13:49:37 2013] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 13:49:37 2013] Initial guess for spatial extent in simple fitting = 7.30"
[Wed Jun 12 13:49:37 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.842
[Wed Jun 12 13:49:37 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Wed Jun 12 13:49:38 2013] fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun 12 13:49:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_src1.csv
[Wed Jun 12 13:49:38 2013] fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun 12 13:49:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_src1.csv
[Wed Jun 12 13:49:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 13:49:38 2013] fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun 12 13:49:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jun 12 13:49:38 2013] fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun 12 13:49:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jun 12 13:49:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 13:49:59 2013] Source 1 is offset by -6.978253 and -7.004559 pixels which is larger than
2 X fitted extent = 0.839494 x 0.839494, not incorporating fit results
[Wed Jun 12 13:49:59 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 13:49:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 13:49:59 2013] Assessing source extent using major
[Wed Jun 12 13:49:59 2013] Source does appear to be extended
[Wed Jun 12 13:49:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 13:50:15 2013] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 13:50:15 2013] Initial guess for spatial extent in simple fitting = 7.30"
[Wed Jun 12 13:50:15 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.842
[Wed Jun 12 13:50:15 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.30"
[Wed Jun 12 13:50:15 2013] fullrun_mos2_xmm0140550601_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun 12 13:50:15 2013] fullrun_mos2_xmm0140550601_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun 12 13:50:15 2013] Fit fullrun_mos2_xmm0140550601_pi300-10000_cl_pass1_src1 appears to have run properly
[Wed Jun 12 13:50:16 2013] fullrun_mos2_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 12 13:50:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Jun 12 13:50:16 2013] fullrun_mos2_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 12 13:50:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Jun 12 13:50:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 13:50:37 2013] Spatial fit model total counts = 826.906000, observed total counts = 776.000000
[Wed Jun 12 13:50:37 2013] Offset between fit and detection position for source 1 = 0.328159 pixels
[Wed Jun 12 13:50:37 2013] 828.201000 total counts/ 333.001000 bgd. counts: snr = 27.136752
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.328159 pixels
  Position = (307.5, 320.5) = 10 7 26.18 12 48 55.3
  Extent = 5.7" x 4.6", rotation angle = 19
  Source counts = 495.2 +/- 28.8
  Background counts = 333.0
  Rate = 0.02 +/- 0.001
[Wed Jun 12 13:50:37 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 13:50:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 13:50:37 2013] Assessing source extent using major
[Wed Jun 12 13:50:37 2013] Source does appear to be extended
[Wed Jun 12 13:50:37 2013] Computing asymmetry using major and minor axis, asym = 1.25
[Wed Jun 12 14:45:26 2013] XMMSAS src. selection expression = ellipse(26706.278173, 27831.563353, 343.500257, 273.766374, 19.059630, X, Y)
[Wed Jun 12 14:45:26 2013] Writing source region out to fullrun_mos2_xmm0140550601_pi300-10000_pass1_cl_src1_src.reg
[Wed Jun 12 14:45:26 2013] Extracting stamp from image fullrun_mos2_xmm0140550601_pi300-10000_cl_sm2.00.img.gz, (288, 301) - (327, 340)
[Wed Jun 12 14:45:26 2013] XMMSAS bgd. selection expression = annulus(26706.278173, 27831.563353, 572.500428, 1145.000855, X, Y) && !ellipse(25644.492600, 27349.469400, 412.872812, 412.872812, 0.000000, X, Y)
[Wed Jun 12 14:45:26 2013] Writing fullrun_mos2_xmm0140550601_pi300-10000_pass1_cl_src1.gif
[Wed Jun 12 14:45:27 2013] Mean detx,y = (69.01, 116.57) 
[Wed Jun 12 14:45:28 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 14:45:33 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 14:45:33 2013] Setting source spectrum file to fullrun_mos2_xmm0140550601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 12 14:45:33 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0140550601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jun 12 15:06:26 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:06:26 2013] Total counts from fullrun_mos2_xmm0140550601_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 544.00
[Wed Jun 12 15:06:26 2013] Total counts from fullrun_mos2_xmm0140550601_pi300-10000_pass1_cl_src1_bgd.pi.gz = 163.00
[Wed Jun 12 15:06:26 2013] Got source and background scale factors 300800.000000, 2577284.000000
[Wed Jun 12 15:06:26 2013] User source parameters:
  Position = (307.5, 320.5) = 10 7 26.18 12 48 55.3
  Extent = 5.7" x 4.6", rotation angle = 19
  Source aperture counts = 525.0 +/- 24.3
  Background aperture counts = 19.0
  Rate = 0.02 +/- 0.001

[Wed Jun 12 15:06:29 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:06:29 2013] Using photon index=1.80, rate=0.0228, arf fullrun_mos2_xmm0140550601_pi300-10000_pass1_cl_src1.arf
[Wed Jun 12 15:06:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:06:29 2013] Updating source flux to 3.1e-13
[Wed Jun 12 15:06:34 2013] Flag b found in src. 1 procflags, skipping spectral fitting
[Wed Jun 12 15:06:36 2013] xmm0140550601/analysis//spectral/fullrun_mos2_xmm0140550601_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete