[Wed Jun 12 13:49:08 2013] Detection parameters:
  Position = (144.4, 348.0) = 10 8 14.69 12 50 56.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.8 +/- 13.4
  Background counts = 5.2
  Rate = 0.005 +/- 0.0006

[Wed Jun 12 13:49:09 2013] Off-axis axis estimate = 11.73'
[Wed Jun 12 13:49:36 2013] Using EEF radius (= 12.29 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 13:49:36 2013] Initial guess for spatial extent in simple fitting = 12.29"
[Wed Jun 12 13:49:36 2013] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.949
[Wed Jun 12 13:49:36 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 12.29"
[Wed Jun 12 13:49:36 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_src9.ximg exists
[Wed Jun 12 13:49:36 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed Jun 12 13:49:36 2013] Fit fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_src9 appears to have run properly
[Wed Jun 12 13:49:37 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed Jun 12 13:49:37 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Jun 12 13:49:37 2013] Fit fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Wed Jun 12 13:49:54 2013] Spatial fit model total counts = 138.946000, observed total counts = 139.000000
[Wed Jun 12 13:49:54 2013] Offset between fit and detection position for source 6 = 0.053727 pixels
[Wed Jun 12 13:49:54 2013] 138.852300 total counts/ 60.005100 bgd. counts: snr = 10.178697
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.053727 pixels
  Position = (144.5, 348.0) = 10 8 14.67 12 50 54.7
  Extent = 5.2 (4.4-6.4)", rotation angle = 0
  Source counts = 78.8 +/- 11.8
  Background counts = 60.0
  Rate = 0.004 +/- 0.0005
[Wed Jun 12 13:49:54 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 13:49:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 13:49:54 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 13:49:54 2013] Source does appear to be extended
[Wed Jun 12 13:49:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 13:50:14 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 12 13:50:14 2013] Initial guess for spatial extent in simple fitting = 5.20"
[Wed Jun 12 13:50:14 2013] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.043
[Wed Jun 12 13:50:14 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 5.20"
[Wed Jun 12 13:50:14 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_src9.ximg exists
[Wed Jun 12 13:50:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_src9.csv
[Wed Jun 12 13:50:14 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed Jun 12 13:50:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_src9.csv
[Wed Jun 12 13:50:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 13:50:15 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed Jun 12 13:50:15 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Jun 12 13:50:15 2013] Fit fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Wed Jun 12 13:50:32 2013] Spatial fit model total counts = 133.724000, observed total counts = 134.000000
[Wed Jun 12 13:50:32 2013] Offset between fit and detection position for source 6 = 0.013473 pixels
[Wed Jun 12 13:50:32 2013] 133.477300 total counts/ 55.796900 bgd. counts: snr = 10.399355
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.013473 pixels
  Position = (144.5, 348.0) = 10 8 14.67 12 50 54.8
  Extent = 5.1 (4.3-6.4)", rotation angle = 0
  Source counts = 77.7 +/- 11.6
  Background counts = 55.8
  Rate = 0.004 +/- 0.0005
[Wed Jun 12 13:50:32 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 13:50:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 13:50:32 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 13:50:32 2013] Source does appear to be extended
[Wed Jun 12 13:50:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 14:18:08 2013] XMMSAS src. selection expression = ellipse(12522.036600, 30225.785600, 307.903809, 307.903809, 0.000000, X, Y)
[Wed Jun 12 14:18:08 2013] Writing source region out to fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src6_src.reg
[Wed Jun 12 14:18:08 2013] Extracting stamp from image fullrun_mos1_xmm0140550601_pi300-10000_cl_sm2.00.img.gz, (127, 330) - (162, 366)
[Wed Jun 12 14:18:08 2013] XMMSAS bgd. selection expression = annulus(12522.036600, 30225.785600, 513.173015, 1026.346030, X, Y) && !ellipse(12131.863739, 28550.140106, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 14:18:08 2013] Writing fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src6.gif
[Wed Jun 12 14:19:26 2013] Mean detx,y = (5318.43, -13724.47) 
[Wed Jun 12 14:19:26 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 14:19:32 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 14:19:32 2013] Setting source spectrum file to fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Jun 12 14:19:32 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed Jun 12 14:43:50 2013] Not generating rmf since there are only 77 counts
[Wed Jun 12 14:43:50 2013] rmf not generated due to insufficient counts
[Wed Jun 12 15:06:24 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:06:24 2013] Total counts from fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 88.00
[Wed Jun 12 15:06:24 2013] Total counts from fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src6_bgd.pi.gz = 54.00
[Wed Jun 12 15:06:24 2013] Got source and background scale factors 300800.000000, 2392000.000000
[Wed Jun 12 15:06:24 2013] User source parameters:
  Position = (144.5, 348.0) = 10 8 14.67 12 50 54.8
  Extent = 5.1 (4.3-6.4)", rotation angle = 0
  Source aperture counts = 81.2 +/- 10.4
  Background aperture counts = 6.8
  Rate = 0.004 +/- 0.0005

[Wed Jun 12 15:06:26 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:06:26 2013] Using photon index=1.80, rate=0.00358, arf fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src6.arf
[Wed Jun 12 15:06:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:06:26 2013] Updating source flux to 1.2e-13
[Wed Jun 12 15:06:31 2013] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jun 12 15:06:34 2013] xmm0140550601/analysis//spectral/fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete