[Wed Jun 12 13:49:09 2013] Detection parameters:
  Position = (438.7, 297.3) = 10 6 47.17 12 47 14.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 25.8 +/- 7.0
  Background counts = 4.7
  Rate = 0.002 +/- 0.0006

[Wed Jun 12 13:49:09 2013] Off-axis axis estimate = 10.17'
[Wed Jun 12 13:49:36 2013] Using EEF radius (= 11.51 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 13:49:36 2013] Initial guess for spatial extent in simple fitting = 11.51"
[Wed Jun 12 13:49:36 2013] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.909
[Wed Jun 12 13:49:36 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 11.51"
[Wed Jun 12 13:49:37 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_src22.ximg exists
[Wed Jun 12 13:49:37 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_src22_1.ximg exists
[Wed Jun 12 13:49:37 2013] Fit fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_src22 appears to have run properly
[Wed Jun 12 13:49:37 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Wed Jun 12 13:49:37 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Wed Jun 12 13:49:37 2013] Fit fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Wed Jun 12 13:49:54 2013] Spatial fit model total counts = 72.886800, observed total counts = 73.000000
[Wed Jun 12 13:49:54 2013] Offset between fit and detection position for source 25 = 0.260842 pixels
[Wed Jun 12 13:49:54 2013] 72.885900 total counts/ 54.676100 bgd. counts: snr = 2.462671
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.260842 pixels
  Position = (438.6, 297.1) = 10 6 47.21 12 47 13.3
  Extent = 5.8 (3.0-11.2)", rotation angle = 0
  Source counts = 18.2 +/- 8.5
  Background counts = 54.7
  Rate = 0.0008 +/- 0.0004
[Wed Jun 12 13:49:54 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 13:49:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 13:49:54 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 13:49:54 2013] Source does appear to be extended
[Wed Jun 12 13:49:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 13:50:14 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 12 13:50:14 2013] Initial guess for spatial extent in simple fitting = 5.78"
[Wed Jun 12 13:50:14 2013] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.897
[Wed Jun 12 13:50:14 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 5.78"
[Wed Jun 12 13:50:15 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_src22.ximg exists
[Wed Jun 12 13:50:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_src22.csv
[Wed Jun 12 13:50:15 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_src22_1.ximg exists
[Wed Jun 12 13:50:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_src22.csv
[Wed Jun 12 13:50:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 13:50:15 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Wed Jun 12 13:50:15 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Wed Jun 12 13:50:15 2013] Fit fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Wed Jun 12 13:50:32 2013] Spatial fit model total counts = 72.997700, observed total counts = 73.000000
[Wed Jun 12 13:50:32 2013] Offset between fit and detection position for source 25 = 0.071339 pixels
[Wed Jun 12 13:50:32 2013] 72.965900 total counts/ 55.772200 bgd. counts: snr = 2.302292
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.071339 pixels
  Position = (438.6, 297.1) = 10 6 47.20 12 47 13.6
  Extent = 5.3 (2.9-10.7)", rotation angle = 0
  Source counts = 17.2 +/- 8.5
  Background counts = 55.8
  Rate = 0.0008 +/- 0.0004
[Wed Jun 12 13:50:32 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 13:50:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 13:50:32 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 13:50:32 2013] Source does appear to be extended
[Wed Jun 12 13:50:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 14:18:09 2013] XMMSAS src. selection expression = ellipse(38108.809800, 25801.732000, 317.411409, 317.411409, 0.000000, X, Y)
[Wed Jun 12 14:18:09 2013] Writing source region out to fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src25_src.reg
[Wed Jun 12 14:18:09 2013] Extracting stamp from image fullrun_mos1_xmm0140550601_pi300-10000_cl_sm2.00.img.gz, (420, 279) - (457, 315)
[Wed Jun 12 14:18:09 2013] XMMSAS bgd. selection expression = annulus(38108.809800, 25801.732000, 529.019015, 1058.038030, X, Y) && !ellipse(36326.710297, 25772.846710, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 12 14:18:09 2013] Writing fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src25.gif
[Wed Jun 12 14:21:24 2013] Mean detx,y = (-3791.19, 10599.69) 
[Wed Jun 12 14:21:25 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 14:21:32 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 14:21:32 2013] Setting source spectrum file to fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Wed Jun 12 14:21:32 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Wed Jun 12 14:44:32 2013] Not generating rmf since there are only 17 counts
[Wed Jun 12 14:44:32 2013] rmf not generated due to insufficient counts
[Wed Jun 12 15:06:25 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:06:25 2013] Total counts from fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src25_src_b10.pi.gz = 26.00
[Wed Jun 12 15:06:25 2013] Total counts from fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src25_bgd.pi.gz = 63.00
[Wed Jun 12 15:06:25 2013] Got source and background scale factors 316800.000000, 2535424.000000
[Wed Jun 12 15:06:25 2013] User source parameters:
  Position = (438.6, 297.1) = 10 6 47.20 12 47 13.6
  Extent = 5.3 (2.9-10.7)", rotation angle = 0
  Source aperture counts = 18.1 +/- 6.2
  Background aperture counts = 7.9
  Rate = 0.0008 +/- 0.0003

[Wed Jun 12 15:06:26 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:06:26 2013] Using photon index=1.80, rate=0.000792, arf fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src25.arf
[Wed Jun 12 15:06:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:06:26 2013] Updating source flux to 1.5e-14
[Wed Jun 12 15:06:31 2013] Source 25 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jun 12 15:06:34 2013] xmm0140550601/analysis//spectral/fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete