[Wed Jun 12 13:49:09 2013] Detection parameters:
  Position = (298.3, 315.3) = 10 7 28.91 12 48 34.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.3 +/- 10.4
  Background counts = 6.2
  Rate = 0.003 +/- 0.0005

[Wed Jun 12 13:49:09 2013] Off-axis axis estimate = 1.22'
[Wed Jun 12 13:49:36 2013] Using EEF radius (= 7.04 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 13:49:36 2013] Initial guess for spatial extent in simple fitting = 7.04"
[Wed Jun 12 13:49:36 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.892
[Wed Jun 12 13:49:36 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 7.04"
[Wed Jun 12 13:49:36 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_src16.ximg exists
[Wed Jun 12 13:49:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_src16.csv
[Wed Jun 12 13:49:36 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_src16_1.ximg exists
[Wed Jun 12 13:49:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_src16.csv
[Wed Jun 12 13:49:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 13:49:37 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Wed Jun 12 13:49:37 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Wed Jun 12 13:49:37 2013] Fit fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Wed Jun 12 13:49:54 2013] Source 23 is offset by -6.129435 and -5.327312 pixels which is larger than
2 X fitted extent = 2.693338 x 2.693338, not incorporating fit results
[Wed Jun 12 13:49:54 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 13:49:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 13:49:54 2013] Assessing source extent using major
[Wed Jun 12 13:49:54 2013] Source does appear to be extended
[Wed Jun 12 13:49:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 13:50:14 2013] Using EEF radius (= 7.04 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 13:50:14 2013] Initial guess for spatial extent in simple fitting = 7.04"
[Wed Jun 12 13:50:14 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.892
[Wed Jun 12 13:50:14 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 7.04"
[Wed Jun 12 13:50:15 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_src16.ximg exists
[Wed Jun 12 13:50:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_src16.csv
[Wed Jun 12 13:50:15 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_src16_1.ximg exists
[Wed Jun 12 13:50:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_src16.csv
[Wed Jun 12 13:50:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 13:50:15 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Wed Jun 12 13:50:15 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Wed Jun 12 13:50:15 2013] Fit fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Wed Jun 12 13:50:32 2013] Source 23 is offset by -6.129435 and 5.743906 pixels which is larger than
2 X fitted extent = 0.809062 x 0.809062, not incorporating fit results
[Wed Jun 12 13:50:32 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 13:50:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 13:50:32 2013] Assessing source extent using major
[Wed Jun 12 13:50:32 2013] Source does appear to be extended
[Wed Jun 12 13:50:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 14:18:09 2013] XMMSAS src. selection expression = ellipse(25907.345184, 27380.113831, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 12 14:18:09 2013] Writing source region out to fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src23_src.reg
[Wed Jun 12 14:18:09 2013] Extracting stamp from image fullrun_mos1_xmm0140550601_pi300-10000_cl_sm2.00.img.gz, (261, 278) - (336, 353)
[Wed Jun 12 14:18:09 2013] XMMSAS bgd. selection expression = annulus(25907.345184, 27380.113831, 1087.500000, 2175.000000, X, Y) && !ellipse(26708.095600, 27834.236200, 417.788012, 417.788012, 0.000000, X, Y)
[Wed Jun 12 14:18:09 2013] Writing fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src23.gif
[Wed Jun 12 14:20:26 2013] Mean detx,y = (74.26, -1037.60) 
[Wed Jun 12 14:20:27 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 14:20:32 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 14:20:32 2013] Setting source spectrum file to fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Wed Jun 12 14:20:32 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Wed Jun 12 14:44:12 2013] Not generating rmf since there are only 60 counts
[Wed Jun 12 14:44:12 2013] rmf not generated due to insufficient counts
[Wed Jun 12 15:06:24 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:06:25 2013] Total counts from fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 154.00
[Wed Jun 12 15:06:25 2013] Total counts from fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src23_bgd.pi.gz = 461.00
[Wed Jun 12 15:06:25 2013] Got source and background scale factors 1345600.000000, 10843520.000000
[Wed Jun 12 15:06:25 2013] User source parameters:
  Position = (298.3, 315.3) = 10 7 28.91 12 48 34.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 96.8 +/- 13.4
  Background aperture counts = 57.2
  Rate = 0.004 +/- 0.0006

[Wed Jun 12 15:06:25 2013] Updating counts from extracted products
[Wed Jun 12 15:06:25 2013] Set source signif. to 96.79/7.56 = 12.80
[Wed Jun 12 15:06:26 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:06:26 2013] Using photon index=1.80, rate=0.00446, arf fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src23.arf
[Wed Jun 12 15:06:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:06:26 2013] Updating source flux to 4.6e-14
[Wed Jun 12 15:06:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 12 15:06:34 2013] xmm0140550601/analysis//spectral/fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete