[Wed Jun 12 13:49:09 2013] Detection parameters:
  Position = (373.7, 369.8) = 10 7 6.49 12 52 26.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.7 +/- 7.2
  Background counts = 4.5
  Rate = 0.003 +/- 0.0006

[Wed Jun 12 13:49:09 2013] Off-axis axis estimate = 7.52'
[Wed Jun 12 13:49:36 2013] Using EEF radius (= 10.19 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 13:49:36 2013] Initial guess for spatial extent in simple fitting = 10.19"
[Wed Jun 12 13:49:36 2013] source mask rpix=2.3, npix_max = 32, mask sum = 17, frac = 0.526
[Wed Jun 12 13:49:36 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 10.19"
[Wed Jun 12 13:49:36 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_src18.ximg exists
[Wed Jun 12 13:49:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_src18.csv
[Wed Jun 12 13:49:37 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_src18_1.ximg exists
[Wed Jun 12 13:49:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_src18.csv
[Wed Jun 12 13:49:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 13:49:37 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Wed Jun 12 13:49:37 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Wed Jun 12 13:49:37 2013] Fit fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Wed Jun 12 13:49:54 2013] Spatial fit model total counts = 51.952600, observed total counts = 53.000000
[Wed Jun 12 13:49:54 2013] Offset between fit and detection position for source 16 = 1.704327 pixels
[Wed Jun 12 13:49:54 2013] 50.181100 total counts/ 27.054200 bgd. counts: snr = 4.446313
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 1.704327 pixels
  Position = (372.0, 369.5) = 10 7 6.99 12 52 28.5
  Extent = 5.6 (4.0-9.6)", rotation angle = 0
  Source counts = 23.1 +/- 7.1
  Background counts = 27.1
  Rate = 0.001 +/- 0.0003
[Wed Jun 12 13:49:54 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 13:49:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 13:49:54 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 13:49:54 2013] Source does appear to be extended
[Wed Jun 12 13:49:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 13:50:14 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 12 13:50:14 2013] Initial guess for spatial extent in simple fitting = 5.58"
[Wed Jun 12 13:50:14 2013] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.707
[Wed Jun 12 13:50:14 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 5.58"
[Wed Jun 12 13:50:15 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_src18.ximg exists
[Wed Jun 12 13:50:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_src18.csv
[Wed Jun 12 13:50:15 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_src18_1.ximg exists
[Wed Jun 12 13:50:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_src18.csv
[Wed Jun 12 13:50:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 13:50:15 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Wed Jun 12 13:50:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src18.csv
[Wed Jun 12 13:50:15 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Wed Jun 12 13:50:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src18.csv
[Wed Jun 12 13:50:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 13:50:32 2013] Spatial fit model total counts = 61.299200, observed total counts = 54.000000
[Wed Jun 12 13:50:32 2013] Offset between fit and detection position for source 16 = 0.875575 pixels
[Wed Jun 12 13:50:32 2013] 61.212900 total counts/ 35.091800 bgd. counts: snr = 4.409493
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.875575 pixels
  Position = (372.5, 368.8) = 10 7 6.84 12 52 25.3
  Extent = 6.5" x 4.6", rotation angle = 52
  Source counts = 26.1 +/- 7.8
  Background counts = 35.1
  Rate = 0.001 +/- 0.0004
[Wed Jun 12 13:50:32 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 13:50:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 13:50:32 2013] Assessing source extent using major
[Wed Jun 12 13:50:32 2013] Source does appear to be extended
[Wed Jun 12 13:50:32 2013] Computing asymmetry using major and minor axis, asym = 1.41
[Wed Jun 12 14:18:09 2013] XMMSAS src. selection expression = ellipse(32361.169723, 32033.383156, 390.100589, 276.851625, 52.474096, X, Y)
[Wed Jun 12 14:18:09 2013] Writing source region out to fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src16_src.reg
[Wed Jun 12 14:18:09 2013] Extracting stamp from image fullrun_mos1_xmm0140550601_pi300-10000_cl_sm2.00.img.gz, (350, 346) - (395, 391)
[Wed Jun 12 14:18:09 2013] XMMSAS bgd. selection expression = annulus(32361.169723, 32033.383156, 650.167649, 1300.335298, X, Y)
[Wed Jun 12 14:18:09 2013] Writing fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src16.gif
[Wed Jun 12 14:20:45 2013] Mean detx,y = (3455.54, 6108.88) 
[Wed Jun 12 14:20:46 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 14:20:55 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 14:20:55 2013] Setting source spectrum file to fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed Jun 12 14:20:55 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Wed Jun 12 14:44:18 2013] Not generating rmf since there are only 26 counts
[Wed Jun 12 14:44:18 2013] rmf not generated due to insufficient counts
[Wed Jun 12 15:06:25 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:06:25 2013] Total counts from fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src16_src_b10.pi.gz = 26.00
[Wed Jun 12 15:06:25 2013] Total counts from fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src16_bgd.pi.gz = 92.00
[Wed Jun 12 15:06:25 2013] Got source and background scale factors 238020.000000, 3290422.000000
[Wed Jun 12 15:06:25 2013] User source parameters:
  Position = (372.5, 368.8) = 10 7 6.84 12 52 25.3
  Extent = 6.5" x 4.6", rotation angle = 52
  Source aperture counts = 19.3 +/- 6.2
  Background aperture counts = 6.7
  Rate = 0.0009 +/- 0.0003

[Wed Jun 12 15:06:26 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:06:26 2013] Using photon index=1.80, rate=0.0012, arf fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src16.arf
[Wed Jun 12 15:06:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:06:26 2013] Updating source flux to 2.3e-14
[Wed Jun 12 15:06:31 2013] Source 16 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jun 12 15:06:34 2013] xmm0140550601/analysis//spectral/fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete