[Wed Jun 12 13:49:08 2013] Detection parameters:
  Position = (277.6, 497.2) = 10 7 35.10 13 1 45.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 185.8 +/- 16.4
  Background counts = 4.7
  Rate = 0.009 +/- 0.0008

[Wed Jun 12 13:49:09 2013] Off-axis axis estimate = 14.49'
[Wed Jun 12 13:49:36 2013] Using EEF radius (= 13.67 ")to estimate initial spatial extent for simple fitting
[Wed Jun 12 13:49:36 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 12 13:49:36 2013] Initial guess for spatial extent in simple fitting = 13.67"
[Wed Jun 12 13:49:36 2013] source mask rpix=3.1, npix_max = 53, mask sum = 49, frac = 0.923
[Wed Jun 12 13:49:36 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 13.67"
[Wed Jun 12 13:49:36 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_src5.ximg exists
[Wed Jun 12 13:49:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_src5.csv
[Wed Jun 12 13:49:36 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Jun 12 13:49:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_src5.csv
[Wed Jun 12 13:49:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 13:49:37 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Jun 12 13:49:37 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Jun 12 13:49:37 2013] Fit fullrun_mos1_xmm0140550601_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Jun 12 13:49:54 2013] Spatial fit model total counts = 224.000000, observed total counts = 224.000000
[Wed Jun 12 13:49:54 2013] Offset between fit and detection position for source 11 = 0.079214 pixels
[Wed Jun 12 13:49:54 2013] 225.422000 total counts/ 101.199000 bgd. counts: snr = 12.348491
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.079214 pixels
  Position = (277.5, 497.2) = 10 7 35.12 13 1 44.1
  Extent = 5.9 (5.0-6.8)", rotation angle = 0
  Source counts = 124.2 +/- 15.0
  Background counts = 101.2
  Rate = 0.006 +/- 0.0007
[Wed Jun 12 13:49:54 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 13:49:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 13:49:54 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 13:49:54 2013] Source does appear to be extended
[Wed Jun 12 13:49:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 13:50:14 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 12 13:50:14 2013] Initial guess for spatial extent in simple fitting = 5.94"
[Wed Jun 12 13:50:14 2013] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.861
[Wed Jun 12 13:50:14 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 5.94"
[Wed Jun 12 13:50:14 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_src5.ximg exists
[Wed Jun 12 13:50:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_src5.csv
[Wed Jun 12 13:50:14 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Jun 12 13:50:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_src5.csv
[Wed Jun 12 13:50:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 12 13:50:15 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Jun 12 13:50:15 2013] fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Jun 12 13:50:15 2013] Fit fullrun_mos1_xmm0140550601_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Jun 12 13:50:32 2013] Spatial fit model total counts = 202.000000, observed total counts = 202.000000
[Wed Jun 12 13:50:32 2013] Offset between fit and detection position for source 11 = 0.025147 pixels
[Wed Jun 12 13:50:32 2013] 202.938400 total counts/ 83.331400 bgd. counts: snr = 13.102442
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.025147 pixels
  Position = (277.5, 497.2) = 10 7 35.13 13 1 44.1
  Extent = 5.7 (4.8-6.6)", rotation angle = 0
  Source counts = 119.6 +/- 14.2
  Background counts = 83.3
  Rate = 0.006 +/- 0.0007
[Wed Jun 12 13:50:32 2013] Vigneting correction estimate = 1.000000
[Wed Jun 12 13:50:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 12 13:50:32 2013] Assessing source extent using major axis lower bound
[Wed Jun 12 13:50:32 2013] Source does appear to be extended
[Wed Jun 12 13:50:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 12 14:18:08 2013] XMMSAS src. selection expression = ellipse(24089.712200, 43208.029000, 341.287034, 341.287034, 0.000000, X, Y)
[Wed Jun 12 14:18:08 2013] Writing source region out to fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src11_src.reg
[Wed Jun 12 14:18:08 2013] Extracting stamp from image fullrun_mos1_xmm0140550601_pi300-10000_cl_sm2.00.img.gz, (258, 478) - (297, 517)
[Wed Jun 12 14:18:08 2013] XMMSAS bgd. selection expression = annulus(24089.712200, 43208.029000, 568.811723, 1137.623446, X, Y)
[Wed Jun 12 14:18:08 2013] Writing fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src11.gif
[Wed Jun 12 14:18:46 2013] Mean detx,y = (15926.60, 50.17) 
[Wed Jun 12 14:18:47 2013] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 12 14:18:52 2013] Binned source spectrum to 10 counts/bin
[Wed Jun 12 14:18:52 2013] Setting source spectrum file to fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed Jun 12 14:18:52 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Wed Jun 12 15:06:23 2013] Updating aperture counts using extracted products
[Wed Jun 12 15:06:23 2013] Total counts from fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 138.00
[Wed Jun 12 15:06:23 2013] Total counts from fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src11_bgd.pi.gz = 85.00
[Wed Jun 12 15:06:23 2013] Got source and background scale factors 368000.000000, 3012844.000000
[Wed Jun 12 15:06:23 2013] User source parameters:
  Position = (277.5, 497.2) = 10 7 35.13 13 1 44.1
  Extent = 5.7 (4.8-6.6)", rotation angle = 0
  Source aperture counts = 127.6 +/- 12.8
  Background aperture counts = 10.4
  Rate = 0.006 +/- 0.0006

[Wed Jun 12 15:06:26 2013] Calculating source flux in energy range 0.30-8.00
[Wed Jun 12 15:06:26 2013] Using photon index=1.80, rate=0.00551, arf fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src11.arf
[Wed Jun 12 15:06:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 12 15:06:26 2013] Updating source flux to 1.7e-13
[Wed Jun 12 15:06:34 2013] xmm0140550601/analysis//spectral/fullrun_mos1_xmm0140550601_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete