[Sun Aug 26 11:14:21 2012] Detection parameters:
  Position = (294.5, 400.2) = 3 23 10.42 -49 22 18.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.1 +/- 14.3
  Background counts = 28.4
  Rate = 0.006 +/- 0.001

[Sun Aug 26 11:14:22 2012] Off-axis axis estimate = 7.39'
[Sun Aug 26 11:16:53 2012] Using EEF radius (= 10.12 ")to estimate initial spatial extent for simple fitting
[Sun Aug 26 11:16:53 2012] Initial guess for spatial extent in simple fitting = 10.12"
[Sun Aug 26 11:16:53 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.939
[Sun Aug 26 11:16:53 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 10.12"
[Sun Aug 26 13:27:15 2012] fullrun_pn_xmm0140190101_pi300-10000_cl_pass0_src33.ximg exists
[Sun Aug 26 13:27:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0140190101_pi300-10000_cl_pass0_src33.csv
[Sun Aug 26 13:27:15 2012] fullrun_pn_xmm0140190101_pi300-10000_cl_pass0_src33_1.ximg exists
[Sun Aug 26 13:27:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0140190101_pi300-10000_cl_pass0_src33.csv
[Sun Aug 26 13:27:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0140190101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0140190101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 13:27:16 2012] fullrun_pn_xmm0140190101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Sun Aug 26 13:27:16 2012] fullrun_pn_xmm0140190101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Sun Aug 26 13:27:16 2012] Fit fullrun_pn_xmm0140190101_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Sun Aug 26 14:30:45 2012] Warning, spatial fit 33 centroid is now closest to src. 34
[Sun Aug 26 14:30:45 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 14:30:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 14:30:45 2012] Assessing source extent using major
[Sun Aug 26 14:30:45 2012] Source does appear to be extended
[Sun Aug 26 14:30:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 14:30:46 2012] Source is confused with source 34
[Sun Aug 26 14:31:01 2012] Using EEF radius (= 10.12 ")to estimate initial spatial extent for simple fitting
[Sun Aug 26 14:31:01 2012] Initial guess for spatial extent in simple fitting = 10.12"
[Sun Aug 26 14:31:01 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.939
[Sun Aug 26 14:31:01 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 10.12"
[Sun Aug 26 16:32:30 2012] fullrun_pn_xmm0140190101_pi300-10000_cl_pass1_src33.ximg exists
[Sun Aug 26 16:32:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0140190101_pi300-10000_cl_pass1_src33.csv
[Sun Aug 26 16:32:30 2012] fullrun_pn_xmm0140190101_pi300-10000_cl_pass1_src33_1.ximg exists
[Sun Aug 26 16:32:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0140190101_pi300-10000_cl_pass1_src33.csv
[Sun Aug 26 16:32:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0140190101_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0140190101_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 16:32:31 2012] fullrun_pn_xmm0140190101_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Sun Aug 26 16:32:31 2012] fullrun_pn_xmm0140190101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Sun Aug 26 16:32:31 2012] Fit fullrun_pn_xmm0140190101_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Sun Aug 26 16:57:41 2012] Warning, spatial fit 33 centroid is now closest to src. 34
[Sun Aug 26 16:57:41 2012] Source 35 is offset by -7.462856 and 1.295231 pixels which is larger than
2 X fitted extent = 1.117232 x 1.117232, not incorporating fit results
[Sun Aug 26 16:57:41 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 16:57:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 16:57:41 2012] Assessing source extent using major
[Sun Aug 26 16:57:41 2012] Source does appear to be extended
[Sun Aug 26 16:57:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 16:58:04 2012] XMMSAS src. selection expression = ellipse(25570.825531, 34771.779114, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Aug 26 16:58:04 2012] Writing source region out to fullrun_pn_xmm0140190101_pi300-10000_pass1_cl_src35_src.reg
[Sun Aug 26 16:58:04 2012] Extracting stamp from image fullrun_pn_xmm0140190101_pi300-10000_cl_sm2.00.img.gz, (257, 363) - (332, 438)
[Sun Aug 26 16:58:04 2012] XMMSAS bgd. selection expression = annulus(25570.825531, 34771.779114, 1087.500000, 2175.000000, X, Y) && !ellipse(27284.999300, 36269.033200, 492.196814, 301.286409, 20.699371, X, Y) && !ellipse(25791.078796, 37359.646790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25748.850600, 36941.674300, 572.984016, 572.984016, 0.000000, X, Y) && !ellipse(25679.194200, 36413.400000, 527.132815, 527.132815, 0.000000, X, Y) && !ellipse(25684.304560, 36065.269600, 722.137621, 722.137621, 0.000000, X, Y) && !ellipse(25643.716705, 35275.034607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25499.486600, 33887.260000, 1115.736032, 554.885616, 119.736400, X, Y) && !ellipse(25437.482340, 33499.752600, 607.427217, 607.427217, 0.000000, X, Y) && !ellipse(25353.083520, 32542.456000, 1469.032042, 318.515209, 97.310670, X, Y) && !ellipse(25383.954800, 31943.715600, 916.472026, 916.472026, 0.000000, X, Y) && !ellipse(25239.774237, 31282.949679, 1387.472040, 307.802147, 97.868476, X, Y)
[Sun Aug 26 16:58:04 2012] Writing fullrun_pn_xmm0140190101_pi300-10000_pass1_cl_src35.gif
[Sun Aug 26 17:25:29 2012] Mean detx,y = (51.54, 10268.84) 
[Sun Aug 26 17:25:31 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 26 17:26:00 2012] grppha failed
[Sun Aug 26 17:26:00 2012] Setting source spectrum file to fullrun_pn_xmm0140190101_pi300-10000_pass1_cl_src35_src.pi.gz
[Sun Aug 26 17:26:00 2012] Setting bgd. spectrum file to fullrun_pn_xmm0140190101_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Sun Aug 26 17:45:23 2012] Not generating rmf since there are only 90 counts
[Sun Aug 26 17:45:23 2012] rmf not generated due to insufficient counts
[Sun Aug 26 17:51:06 2012] Updating aperture counts using extracted products
[Sun Aug 26 17:51:06 2012] Error reading totcts from fullrun_pn_xmm0140190101_pi300-10000_pass1_cl_src35_src.pi.gz
[Sun Aug 26 17:51:07 2012] No arf file for this source, not re-computing flux
[Sun Aug 26 17:51:11 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Aug 26 17:51:12 2012] xmm0140190101/analysis//spectral/fullrun_pn_xmm0140190101_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete