[Mon Jun 10 21:39:14 2013] Detection parameters:
  Position = (300.3, 245.1) = 15 50 42.81 -3 58 47.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 594.2 +/- 30.5
  Background counts = 39.5
  Rate = 0.07 +/- 0.003

[Mon Jun 10 21:39:14 2013] Off-axis axis estimate = 3.87'
[Mon Jun 10 21:48:20 2013] Using EEF radius (= 8.36 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 21:48:20 2013] Initial guess for spatial extent in simple fitting = 8.36"
[Mon Jun 10 21:48:20 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.065
[Mon Jun 10 21:48:20 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 8.36"
[Mon Jun 10 21:52:12 2013] fullrun_mos2_xmm0138951501_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jun 10 21:52:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0138951501_pi300-10000_cl_pass0_src3.csv
[Mon Jun 10 21:52:12 2013] fullrun_mos2_xmm0138951501_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jun 10 21:52:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0138951501_pi300-10000_cl_pass0_src3.csv
[Mon Jun 10 21:52:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0138951501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0138951501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 21:52:12 2013] fullrun_mos2_xmm0138951501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jun 10 21:52:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0138951501_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun 10 21:52:12 2013] fullrun_mos2_xmm0138951501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jun 10 21:52:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0138951501_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun 10 21:52:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0138951501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0138951501_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 21:52:14 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.020057 pixels away
[Mon Jun 10 21:52:14 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 21:52:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 21:52:14 2013] Assessing source extent using major
[Mon Jun 10 21:52:14 2013] Source does appear to be extended
[Mon Jun 10 21:52:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 22:00:34 2013] Using EEF radius (= 8.36 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 22:00:34 2013] Initial guess for spatial extent in simple fitting = 8.36"
[Mon Jun 10 22:00:34 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.065
[Mon Jun 10 22:00:34 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 8.36"
[Mon Jun 10 22:04:48 2013] fullrun_mos2_xmm0138951501_pi300-10000_cl_pass1_src3.ximg exists
[Mon Jun 10 22:04:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0138951501_pi300-10000_cl_pass1_src3.csv
[Mon Jun 10 22:04:48 2013] fullrun_mos2_xmm0138951501_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Jun 10 22:04:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0138951501_pi300-10000_cl_pass1_src3.csv
[Mon Jun 10 22:04:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0138951501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0138951501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 22:04:48 2013] fullrun_mos2_xmm0138951501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Jun 10 22:04:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0138951501_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon Jun 10 22:04:48 2013] fullrun_mos2_xmm0138951501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Jun 10 22:04:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0138951501_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon Jun 10 22:04:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0138951501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0138951501_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 22:04:50 2013] Source 1 is offset by -5.963072 and 6.779832 pixels which is larger than
2 X fitted extent = 0.961333 x 0.961333, not incorporating fit results
[Mon Jun 10 22:04:50 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 22:04:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 22:04:50 2013] Assessing source extent using major
[Mon Jun 10 22:04:50 2013] Source does appear to be extended
[Mon Jun 10 22:04:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 22:16:25 2013] XMMSAS src. selection expression = ellipse(26078.700775, 21274.255341, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 22:16:25 2013] Writing source region out to fullrun_mos2_xmm0138951501_pi300-10000_pass1_cl_src1_src.reg
[Mon Jun 10 22:16:25 2013] Extracting stamp from image fullrun_mos2_xmm0138951501_pi300-10000_cl_sm2.00.img.gz, (263, 208) - (338, 283)
[Mon Jun 10 22:16:25 2013] XMMSAS bgd. selection expression = annulus(26078.700775, 21274.255341, 1087.500000, 2175.000000, X, Y)
[Mon Jun 10 22:16:25 2013] Writing fullrun_mos2_xmm0138951501_pi300-10000_pass1_cl_src1.gif
[Mon Jun 10 22:17:27 2013] Mean detx,y = (2403.05, -6080.28) 
[Mon Jun 10 22:17:27 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 22:17:36 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 22:17:36 2013] Setting source spectrum file to fullrun_mos2_xmm0138951501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun 10 22:17:36 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0138951501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jun 10 22:21:40 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 22:21:40 2013] rmf not generated due to insufficient counts
[Mon Jun 10 22:22:07 2013] Updating aperture counts using extracted products
[Mon Jun 10 22:22:07 2013] Total counts from fullrun_mos2_xmm0138951501_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 243.00
[Mon Jun 10 22:22:07 2013] Total counts from fullrun_mos2_xmm0138951501_pi300-10000_pass1_cl_src1_bgd.pi.gz = 366.00
[Mon Jun 10 22:22:07 2013] Got source and background scale factors 1246524.000000, 10546397.000000
[Mon Jun 10 22:22:07 2013] User source parameters:
  Position = (300.3, 245.1) = 15 50 42.81 -3 58 47.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 199.7 +/- 16.6
  Background aperture counts = 43.3
  Rate = 0.05 +/- 0.004

[Mon Jun 10 22:22:07 2013] Updating counts from extracted products
[Mon Jun 10 22:22:07 2013] Set source signif. to 199.74/6.58 = 30.37
[Mon Jun 10 22:22:08 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 22:22:08 2013] Using photon index=1.80, rate=0.0502, arf fullrun_mos2_xmm0138951501_pi300-10000_pass1_cl_src1.arf
[Mon Jun 10 22:22:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 22:22:08 2013] Updating source flux to 7.1e-13
[Mon Jun 10 22:22:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 22:22:11 2013] xmm0138951501/analysis//spectral/fullrun_mos2_xmm0138951501_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete