[Mon Sep  3 23:21:52 2012] Detection parameters:
  Position = (310.0, 319.2) = 17 34 13.52 -26 5 15.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.0 +/- 12.2
  Background counts = 17.6
  Rate = 0.003 +/- 0.0005

[Mon Sep  3 23:21:52 2012] Off-axis axis estimate = 1.73'
[Mon Sep  3 23:32:47 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 23:32:47 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Mon Sep  3 23:32:47 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Mon Sep  3 23:32:47 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.29"
[Mon Sep  3 23:40:40 2012] fullrun_mos1_xmm0137950301_pi300-10000_cl_pass0_src5.ximg exists
[Mon Sep  3 23:40:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0137950301_pi300-10000_cl_pass0_src5.csv
[Mon Sep  3 23:40:40 2012] fullrun_mos1_xmm0137950301_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon Sep  3 23:40:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0137950301_pi300-10000_cl_pass0_src5.csv
[Mon Sep  3 23:40:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0137950301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0137950301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 23:40:40 2012] fullrun_mos1_xmm0137950301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon Sep  3 23:40:40 2012] fullrun_mos1_xmm0137950301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Sep  3 23:40:40 2012] Fit fullrun_mos1_xmm0137950301_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Mon Sep  3 23:49:15 2012] Warning, spatial fit 5 centroid is now closest to src. 5
[Mon Sep  3 23:49:15 2012] Source 4 is offset by -2.195908 and 6.418920 pixels which is larger than
2 X fitted extent = 2.517458 x 2.517458, not incorporating fit results
[Mon Sep  3 23:49:15 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 23:49:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 23:49:15 2012] Assessing source extent using major
[Mon Sep  3 23:49:15 2012] Source does appear to be extended
[Mon Sep  3 23:49:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 23:49:15 2012] Source is confused with source 5
[Mon Sep  3 23:58:25 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 23:58:25 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Mon Sep  3 23:58:25 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Mon Sep  3 23:58:25 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 7.29"
[Tue Sep  4 00:07:03 2012] fullrun_mos1_xmm0137950301_pi300-10000_cl_pass1_src5.ximg exists
[Tue Sep  4 00:07:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0137950301_pi300-10000_cl_pass1_src5.csv
[Tue Sep  4 00:07:03 2012] fullrun_mos1_xmm0137950301_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Sep  4 00:07:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0137950301_pi300-10000_cl_pass1_src5.csv
[Tue Sep  4 00:07:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0137950301_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0137950301_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 00:07:03 2012] fullrun_mos1_xmm0137950301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Sep  4 00:07:03 2012] fullrun_mos1_xmm0137950301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Sep  4 00:07:03 2012] Fit fullrun_mos1_xmm0137950301_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Sep  4 00:13:42 2012] Spatial fit model total counts = 284.692000, observed total counts = 286.000000
[Tue Sep  4 00:13:42 2012] Offset between fit and detection position for source 4 = 0.574986 pixels
[Tue Sep  4 00:13:42 2012] 280.723000 total counts/ 239.871000 bgd. counts: snr = 2.637694
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.574986 pixels
  Position = (309.5, 319.5) = 17 34 13.69 -26 5 15.9
  Extent = 5.8 (3.6-7.6)", rotation angle = 0
  Source counts = 40.9 +/- 16.8
  Background counts = 239.9
  Rate = 0.002 +/- 0.0007
[Tue Sep  4 00:13:42 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 00:13:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 00:13:42 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 00:13:42 2012] Source does appear to be extended
[Tue Sep  4 00:13:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 00:16:55 2012] XMMSAS src. selection expression = ellipse(26878.210200, 27749.839200, 346.240810, 346.240810, 0.000000, X, Y)
[Tue Sep  4 00:16:55 2012] Writing source region out to fullrun_mos1_xmm0137950301_pi300-10000_pass1_cl_src4_src.reg
[Tue Sep  4 00:16:55 2012] Extracting stamp from image fullrun_mos1_xmm0137950301_pi300-10000_cl_sm2.00.img.gz, (290, 300) - (329, 339)
[Tue Sep  4 00:16:55 2012] XMMSAS bgd. selection expression = annulus(26878.210200, 27749.839200, 577.068017, 1154.136033, X, Y) && !ellipse(27114.292760, 27167.508600, 442.440813, 434.042412, 359.871616, X, Y)
[Tue Sep  4 00:16:55 2012] Writing fullrun_mos1_xmm0137950301_pi300-10000_pass1_cl_src4.gif
[Tue Sep  4 00:17:48 2012] Mean detx,y = (356.64, -294.36) 
[Tue Sep  4 00:17:49 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 00:17:57 2012] grppha failed
[Tue Sep  4 00:17:57 2012] Setting source spectrum file to fullrun_mos1_xmm0137950301_pi300-10000_pass1_cl_src4_src.pi.gz
[Tue Sep  4 00:17:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0137950301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Sep  4 00:18:28 2012] Not generating rmf since there are only 40 counts
[Tue Sep  4 00:18:28 2012] rmf not generated due to insufficient counts
[Tue Sep  4 00:20:08 2012] Updating aperture counts using extracted products
[Tue Sep  4 00:20:08 2012] Error reading totcts from fullrun_mos1_xmm0137950301_pi300-10000_pass1_cl_src4_src.pi.gz
[Tue Sep  4 00:20:08 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 00:20:09 2012] Flag b found in src. 4 procflags, skipping spectral fitting
[Tue Sep  4 00:20:09 2012] Flag c found in src. 4 procflags, skipping spectral fitting
[Tue Sep  4 00:20:09 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Sep  4 00:20:10 2012] xmm0137950301/analysis//spectral/fullrun_mos1_xmm0137950301_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete