[Thu Aug  9 20:44:01 2012] Detection parameters:
  Position = (380.4, 330.2) = 5 24 26.66 -69 36 16.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.0 +/- 15.6
  Background counts = 71.8
  Rate = 0.01 +/- 0.002

[Thu Aug  9 20:44:01 2012] Off-axis axis estimate = 6.37'
[Thu Aug  9 20:46:25 2012] Using EEF radius (= 9.61 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 20:46:25 2012] Initial guess for spatial extent in simple fitting = 9.61"
[Thu Aug  9 20:46:25 2012] source mask rpix=2.2, npix_max = 29, mask sum = 17, frac = 0.579
[Thu Aug  9 20:46:25 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 9.61"
[Fri Aug 10 19:24:52 2012] fullrun_pn_xmm0137551301_pi300-10000_cl_pass0_src10.ximg exists
[Fri Aug 10 19:24:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0137551301_pi300-10000_cl_pass0_src10.csv
[Fri Aug 10 19:24:52 2012] fullrun_pn_xmm0137551301_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri Aug 10 19:24:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0137551301_pi300-10000_cl_pass0_src10.csv
[Fri Aug 10 19:24:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0137551301_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0137551301_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 19:24:52 2012] fullrun_pn_xmm0137551301_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri Aug 10 19:24:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0137551301_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri Aug 10 19:24:52 2012] fullrun_pn_xmm0137551301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Aug 10 19:24:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0137551301_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri Aug 10 19:24:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0137551301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0137551301_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 19:55:30 2012] Spatial fit model total counts = 389.384000, observed total counts = 321.000000
[Fri Aug 10 19:55:30 2012] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Aug 10 19:55:30 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 19:55:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 19:55:30 2012] Assessing source extent using major
[Fri Aug 10 19:55:30 2012] Source does appear to be extended
[Fri Aug 10 19:55:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 10 19:55:30 2012] Deleting source due to low Poisson probability 0.9