[Thu Aug  9 20:44:19 2012] Detection parameters:
  Position = (294.1, 335.4) = 5 25 38.39 -69 35 45.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 287.0 +/- 20.9
  Background counts = 21.4
  Rate = 0.04 +/- 0.003

[Thu Aug  9 20:44:19 2012] Off-axis axis estimate = 2.69'
[Fri Aug 10 19:24:52 2012] Using EEF radius (= 7.78 ")to estimate initial spatial extent for simple fitting
[Fri Aug 10 19:24:52 2012] Initial guess for spatial extent in simple fitting = 7.78"
[Fri Aug 10 19:24:52 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.955
[Fri Aug 10 19:24:52 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.78"
[Fri Aug 10 19:46:34 2012] fullrun_mos1_xmm0137551301_pi300-10000_cl_pass0_src2.ximg exists
[Fri Aug 10 19:46:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0137551301_pi300-10000_cl_pass0_src2.csv
[Fri Aug 10 19:46:34 2012] fullrun_mos1_xmm0137551301_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Aug 10 19:46:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0137551301_pi300-10000_cl_pass0_src2.csv
[Fri Aug 10 19:46:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0137551301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0137551301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 10 19:46:34 2012] fullrun_mos1_xmm0137551301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Aug 10 19:46:34 2012] fullrun_mos1_xmm0137551301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Aug 10 19:46:34 2012] Fit fullrun_mos1_xmm0137551301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Aug 10 19:55:32 2012] Spatial fit model total counts = 414.656000, observed total counts = 410.000000
[Fri Aug 10 19:55:32 2012] Offset between fit and detection position for source 5 = 0.176332 pixels
[Fri Aug 10 19:55:32 2012] 414.216000 total counts/ 232.985000 bgd. counts: snr = 11.873220
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.176332 pixels
  Position = (294.0, 335.4) = 5 25 38.53 -69 35 46.1
  Extent = 4.4 (3.9-5.0)", rotation angle = 0
  Source counts = 181.2 +/- 20.4
  Background counts = 233.0
  Rate = 0.02 +/- 0.003
[Fri Aug 10 19:55:32 2012] Vigneting correction estimate = 1.000000
[Fri Aug 10 19:55:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 10 19:55:32 2012] Assessing source extent using major axis lower bound
[Fri Aug 10 19:55:32 2012] Source does appear to be extended
[Fri Aug 10 19:55:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 08:07:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 11 08:07:51 2012] Initial guess for spatial extent in simple fitting = 4.36"
[Sat Aug 11 08:07:51 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.998
[Sat Aug 11 08:07:51 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 4.36"
[Sat Aug 11 08:21:43 2012] fullrun_mos1_xmm0137551301_pi300-10000_cl_pass1_src2.ximg exists
[Sat Aug 11 08:21:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0137551301_pi300-10000_cl_pass1_src2.csv
[Sat Aug 11 08:21:43 2012] fullrun_mos1_xmm0137551301_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Aug 11 08:21:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0137551301_pi300-10000_cl_pass1_src2.csv
[Sat Aug 11 08:21:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0137551301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0137551301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 11 08:21:43 2012] fullrun_mos1_xmm0137551301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Aug 11 08:21:43 2012] fullrun_mos1_xmm0137551301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Aug 11 08:21:43 2012] Fit fullrun_mos1_xmm0137551301_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Aug 11 08:25:54 2012] Spatial fit model total counts = 409.430000, observed total counts = 406.000000
[Sat Aug 11 08:25:54 2012] Offset between fit and detection position for source 5 = 0.003121 pixels
[Sat Aug 11 08:25:54 2012] 410.679000 total counts/ 228.984000 bgd. counts: snr = 12.007163
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.003121 pixels
  Position = (294.0, 335.4) = 5 25 38.53 -69 35 46.1
  Extent = 4.4 (3.9-5.0)", rotation angle = 0
  Source counts = 181.7 +/- 20.3
  Background counts = 229.0
  Rate = 0.02 +/- 0.003
[Sat Aug 11 08:25:54 2012] Vigneting correction estimate = 1.000000
[Sat Aug 11 08:25:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 11 08:25:54 2012] Assessing source extent using major axis lower bound
[Sat Aug 11 08:25:54 2012] Source does appear to be extended
[Sat Aug 11 08:25:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 11 09:14:08 2012] XMMSAS src. selection expression = ellipse(25528.254600, 29133.775400, 263.299208, 263.299208, 0.000000, X, Y)
[Sat Aug 11 09:14:08 2012] Writing source region out to fullrun_mos1_xmm0137551301_pi300-10000_pass1_cl_src5_src.reg
[Sat Aug 11 09:14:08 2012] Extracting stamp from image fullrun_mos1_xmm0137551301_pi300-10000_cl_sm2.00.img.gz, (279, 320) - (309, 351)
[Sat Aug 11 09:14:08 2012] XMMSAS bgd. selection expression = annulus(25528.254600, 29133.775400, 438.832013, 877.664025, X, Y)
[Sat Aug 11 09:14:08 2012] Writing fullrun_mos1_xmm0137551301_pi300-10000_pass1_cl_src5.gif
[Sat Aug 11 09:16:23 2012] Mean detx,y = (725.42, 1073.60) 
[Sat Aug 11 09:16:24 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 11 09:16:31 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 11 09:16:31 2012] Setting source spectrum file to fullrun_mos1_xmm0137551301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Aug 11 09:16:31 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0137551301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Aug 11 09:45:30 2012] Updating aperture counts using extracted products
[Sat Aug 11 09:45:30 2012] Error reading totcts from fullrun_mos1_xmm0137551301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Aug 11 09:45:30 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 09:45:30 2012] Using photon index=1.80, rate=0.0229, arf fullrun_mos1_xmm0137551301_pi300-10000_pass1_cl_src5.arf
[Sat Aug 11 09:45:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 11 09:45:30 2012] Updating source flux to 2.8e-13
[Sat Aug 11 09:45:49 2012] Reading fit data from xmm0137551301/analysis//spectral/fullrun_mos1_xmm0137551301_pi300-10000_pass1_cl_src5_pl.csv
[Sat Aug 11 09:45:49 2012] Spectral fit parameter nH value = 1.14226e+22
[Sat Aug 11 09:45:49 2012] Spectral fit parameter PhoIndex value = 9.724
[Sat Aug 11 09:45:49 2012] Failed to get F(0.3-8.0) from xmm0137551301/analysis//spectral/fullrun_mos1_xmm0137551301_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Sat Aug 11 09:45:49 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 11 09:45:49 2012] Using Nh = 1.1e+22, photon index=9.72, rate=0.0229, arf fullrun_mos1_xmm0137551301_pi300-10000_pass1_cl_src5.arf
[Sat Aug 11 09:45:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 11 09:45:49 2012] Updating source flux to 1.7e-13