[Sun May 19 17:53:57 2013] Detection parameters:
  Position = (288.0, 360.3) = 5 25 1.01 -69 39 31.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 15339.7 +/- 149.0
  Background counts = 557.5
  Rate = 0.7 +/- 0.007

[Sun May 19 17:53:57 2013] Off-axis axis estimate = 4.55'
[Sun May 19 17:59:36 2013] Using EEF radius (= 8.70 ")to estimate initial spatial extent for simple fitting
[Sun May 19 17:59:36 2013] Initial guess for spatial extent in simple fitting = 8.70"
[Sun May 19 17:59:36 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 1.000
[Sun May 19 17:59:36 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 8.70"
[Sun May 19 18:19:33 2013] fullrun_pn_xmm0137551201_pi300-10000_cl_pass0_src4.ximg exists
[Sun May 19 18:19:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0137551201_pi300-10000_cl_pass0_src4.csv
[Sun May 19 18:19:33 2013] fullrun_pn_xmm0137551201_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun May 19 18:19:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0137551201_pi300-10000_cl_pass0_src4.csv
[Sun May 19 18:19:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0137551201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0137551201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 19 18:19:34 2013] fullrun_pn_xmm0137551201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun May 19 18:19:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0137551201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun May 19 18:19:34 2013] fullrun_pn_xmm0137551201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun May 19 18:19:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0137551201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun May 19 18:19:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0137551201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0137551201_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 09:03:51 2013] Source 4 is offset by 0.791617 and -8.729409 pixels which is larger than
2 X fitted extent = 7.764874 x 7.764874, not incorporating fit results
[Mon May 20 09:03:51 2013] Vigneting correction estimate = 1.000000
[Mon May 20 09:03:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 20 09:03:51 2013] Assessing source extent using major
[Mon May 20 09:03:51 2013] Source does appear to be extended
[Mon May 20 09:03:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 20 09:04:10 2013] Using EEF radius (= 8.70 ")to estimate initial spatial extent for simple fitting
[Mon May 20 09:04:10 2013] Initial guess for spatial extent in simple fitting = 8.70"
[Mon May 20 09:04:10 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 1.000
[Mon May 20 09:04:10 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 8.70"
[Mon May 20 09:37:09 2013] fullrun_pn_xmm0137551201_pi300-10000_cl_pass1_src4.ximg exists
[Mon May 20 09:37:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0137551201_pi300-10000_cl_pass1_src4.csv
[Mon May 20 09:37:09 2013] fullrun_pn_xmm0137551201_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon May 20 09:37:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0137551201_pi300-10000_cl_pass1_src4.csv
[Mon May 20 09:37:09 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0137551201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0137551201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 20 09:37:09 2013] fullrun_pn_xmm0137551201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon May 20 09:37:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0137551201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon May 20 09:37:09 2013] fullrun_pn_xmm0137551201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon May 20 09:37:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0137551201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon May 20 09:37:09 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0137551201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0137551201_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 05:26:40 2013] Source 4 is offset by 0.791477 and -8.729409 pixels which is larger than
2 X fitted extent = 7.612506 x 7.612506, not incorporating fit results
[Tue May 21 05:26:40 2013] Vigneting correction estimate = 1.000000
[Tue May 21 05:26:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 05:26:40 2013] Assessing source extent using major
[Tue May 21 05:26:40 2013] Source does appear to be extended
[Tue May 21 05:26:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 05:26:56 2013] Counts = 15339.696289, rescaling region sizes by 3.000000
[Tue May 21 05:26:56 2013] XMMSAS src. selection expression = ellipse(25004.932587, 31295.201447, 1957.500000, 1957.500000, 0.000000, X, Y)
[Tue May 21 05:26:56 2013] Writing source region out to fullrun_pn_xmm0137551201_pi300-10000_pass1_cl_src4_src.reg
[Tue May 21 05:26:56 2013] Extracting stamp from image fullrun_pn_xmm0137551201_pi300-10000_cl_sm2.00.img.gz, (175, 248) - (400, 473)
[Tue May 21 05:26:56 2013] XMMSAS bgd. selection expression = annulus(25004.932587, 31295.201447, 9787.500000, 19575.000000, X, Y) && !ellipse(19678.398209, 24891.727448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25271.112549, 23784.089050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24564.542877, 23823.256042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19484.135025, 30411.174927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27641.918304, 30407.157867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14329.329269, 29554.906738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28265.094000, 28970.890000, 1294.704037, 1294.704037, 0.000000, X, Y) && !ellipse(20286.995972, 24911.764954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23278.492000, 24846.260000, 1203.632035, 1203.632035, 0.000000, X, Y) && !ellipse(34902.621800, 24356.116600, 1123.904032, 204.929606, 79.766896, X, Y) && !ellipse(22777.953800, 19665.530200, 387.342411, 387.342411, 0.000000, X, Y) && !ellipse(27433.161316, 31170.133636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20738.996124, 31141.698273, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 21 05:26:56 2013] Writing fullrun_pn_xmm0137551201_pi300-10000_pass1_cl_src4.gif
[Tue May 21 05:33:10 2013] Mean detx,y = (-43.04, 6546.75) 
[Tue May 21 05:33:19 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 21 05:42:29 2013] Binned source spectrum to 10 counts/bin
[Tue May 21 05:42:30 2013] Setting source spectrum file to fullrun_pn_xmm0137551201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue May 21 05:42:30 2013] Setting bgd. spectrum file to fullrun_pn_xmm0137551201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue May 21 06:38:10 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 21 06:38:10 2013] rmf not generated due to insufficient counts
[Tue May 21 08:50:39 2013] Updating aperture counts using extracted products
[Tue May 21 08:50:39 2013] Total counts from fullrun_pn_xmm0137551201_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 28415.00
[Tue May 21 08:50:39 2013] Total counts from fullrun_pn_xmm0137551201_pi300-10000_pass1_cl_src4_bgd.pi.gz = 155665.00
[Tue May 21 08:50:39 2013] Got source and background scale factors 7449061.000000, 283260754.000000
[Tue May 21 08:50:39 2013] User source parameters:
  Position = (288.0, 360.3) = 5 25 1.01 -69 39 31.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 24321.4 +/- 169.6
  Background aperture counts = 4093.6
  Rate = 2 +/- 0.01

[Tue May 21 08:50:39 2013] Updating counts from extracted products
[Tue May 21 08:50:39 2013] Set source signif. to 24321.39/63.98 = 380.13
[Tue May 21 08:50:42 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 08:50:42 2013] Using photon index=1.80, rate=2.09, arf fullrun_pn_xmm0137551201_pi300-10000_pass1_cl_src4.arf
[Tue May 21 08:50:42 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 08:50:42 2013] Updating source flux to 1.4e-11
[Tue May 21 08:50:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 21 08:50:53 2013] xmm0137551201/analysis//spectral/fullrun_pn_xmm0137551201_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete