[Fri Jun 15 02:25:42 2012] Detection parameters:
  Position = (152.2, 386.3) = 8 49 56.24 -45 31 40.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 130.8 +/- 19.0
  Background counts = 64.0
  Rate = 0.004 +/- 0.0005

[Fri Jun 15 02:25:43 2012] Off-axis axis estimate = 12.37'
[Fri Jun 15 11:22:45 2012] Using EEF radius (= 12.61 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 11:22:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 15 11:22:45 2012] Initial guess for spatial extent in simple fitting = 12.61"
[Fri Jun 15 11:22:45 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.060
[Fri Jun 15 11:22:45 2012] Giving source the simple spatial ID 65 for pass 0, mean size = 12.61"
[Fri Jun 15 16:00:26 2012] fullrun_mos2_xmm0137550901_pi300-10000_cl_pass0_src65.ximg exists
[Fri Jun 15 16:00:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0137550901_pi300-10000_cl_pass0_src65.csv
[Fri Jun 15 16:00:26 2012] fullrun_mos2_xmm0137550901_pi300-10000_cl_pass0_src65_1.ximg exists
[Fri Jun 15 16:00:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0137550901_pi300-10000_cl_pass0_src65.csv
[Fri Jun 15 16:00:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0137550901_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0137550901_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 16:00:27 2012] fullrun_mos2_xmm0137550901_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Fri Jun 15 16:00:27 2012] fullrun_mos2_xmm0137550901_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Fri Jun 15 16:00:27 2012] Fit fullrun_mos2_xmm0137550901_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly
[Fri Jun 15 16:01:22 2012] Spatial fit model total counts = 1170.880000, observed total counts = 1146.000000
[Fri Jun 15 16:01:22 2012] Offset between fit and detection position for source 16 = 0.058017 pixels
[Fri Jun 15 16:01:22 2012] 1163.932500 total counts/ 1132.540000 bgd. counts: snr = 0.932823
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.058017 pixels
  Position = (152.3, 386.3) = 8 49 56.22 -45 31 43.9
  Extent = 3.2" x 3.2", rotation angle = 0
  Source counts = 31.4 +/- 34.1
  Background counts = 1132.5
  Rate = 0.0009 +/- 0.0009
  Deleting source due to low Poisson probability