[Fri Jun 15 02:25:14 2012] Detection parameters:
  Position = (373.3, 231.2) = 8 48 24.60 -45 42 58.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.4 +/- 20.2
  Background counts = 146.9
  Rate = 0.004 +/- 0.0008

[Fri Jun 15 02:25:14 2012] Off-axis axis estimate = 7.30'
[Fri Jun 15 08:01:27 2012] Using EEF radius (= 10.08 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 08:01:27 2012] Initial guess for spatial extent in simple fitting = 10.08"
[Fri Jun 15 08:01:27 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.945
[Fri Jun 15 08:01:27 2012] Giving source the simple spatial ID 56 for pass 0, mean size = 10.08"
[Fri Jun 15 11:22:43 2012] fullrun_mos1_xmm0137550901_pi300-10000_cl_pass0_src56.ximg exists
[Fri Jun 15 11:22:43 2012] fullrun_mos1_xmm0137550901_pi300-10000_cl_pass0_src56_1.ximg exists
[Fri Jun 15 11:22:43 2012] Fit fullrun_mos1_xmm0137550901_pi300-10000_cl_pass0_src56 appears to have run properly
[Fri Jun 15 11:22:45 2012] fullrun_mos1_xmm0137550901_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Fri Jun 15 11:22:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0137550901_pi300-10000_cl_pass0_tfrozen_src56.csv
[Fri Jun 15 11:22:45 2012] fullrun_mos1_xmm0137550901_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Fri Jun 15 11:22:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0137550901_pi300-10000_cl_pass0_tfrozen_src56.csv
[Fri Jun 15 11:22:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0137550901_pi300-10000_cl_pass0_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0137550901_pi300-10000_cl_pass0_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 16:01:06 2012] Spatial fit model total counts = 2011.420000, observed total counts = 1859.000000
[Fri Jun 15 16:01:06 2012] Offset between fit and detection position for source 62 = 3.686039 pixels
[Fri Jun 15 16:01:06 2012] 1874.818000 total counts/ 1647.780000 bgd. counts: snr = 5.593053
Spatial fit parameters:
  Offset between fit and detection position for source 62 = 3.686039 pixels
  Position = (370.8, 233.9) = 8 48 25.66 -45 42 47.5
  Extent = 20.2" x 9.5", rotation angle = 48
  Source counts = 227.0 +/- 43.3
  Background counts = 1647.8
  Rate = 0.006 +/- 0.001
[Fri Jun 15 16:01:06 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 16:01:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 16:01:06 2012] Assessing source extent using major
[Fri Jun 15 16:01:06 2012] Source does appear to be extended
[Fri Jun 15 16:01:06 2012] Computing asymmetry using major and minor axis, asym = 2.13
[Fri Jun 15 16:01:06 2012] Source is asymmetric
[Fri Jun 15 16:01:06 2012] Source is confused with source 20
[Fri Jun 15 21:36:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 21:36:32 2012] Initial guess for spatial extent in simple fitting = 14.80"
[Fri Jun 15 21:36:32 2012] source mask rpix=3.4, npix_max = 60, mask sum = 53, frac = 0.870
[Fri Jun 15 21:36:32 2012] Giving source the simple spatial ID 51 for pass 1, mean size = 14.80"
[Sat Jun 16 02:04:04 2012] fullrun_mos1_xmm0137550901_pi300-10000_cl_pass1_src51.ximg exists
[Sat Jun 16 02:04:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0137550901_pi300-10000_cl_pass1_src51.csv
[Sat Jun 16 02:04:04 2012] fullrun_mos1_xmm0137550901_pi300-10000_cl_pass1_src51_1.ximg exists
[Sat Jun 16 02:04:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0137550901_pi300-10000_cl_pass1_src51.csv
[Sat Jun 16 02:04:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0137550901_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0137550901_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 02:04:06 2012] fullrun_mos1_xmm0137550901_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Sat Jun 16 02:04:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0137550901_pi300-10000_cl_pass1_tfrozen_src51.csv
[Sat Jun 16 02:04:06 2012] fullrun_mos1_xmm0137550901_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Sat Jun 16 02:04:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0137550901_pi300-10000_cl_pass1_tfrozen_src51.csv
[Sat Jun 16 02:04:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0137550901_pi300-10000_cl_pass1_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0137550901_pi300-10000_cl_pass1_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 05:37:06 2012] Source 62 is offset by -5.316963 and 4.443788 pixels which is larger than
2 X fitted extent = 3.126625 x 3.126625, not incorporating fit results
[Sat Jun 16 05:37:06 2012] Spatial fit model total counts = 9038.090000, observed total counts = 8535.000000
[Sat Jun 16 05:37:06 2012] Offset between fit and detection position for source 62 = 2.304108 pixels
[Sat Jun 16 05:37:06 2012] Warning, changing simple spatial fit ID from 51 to 33
[Sat Jun 16 05:37:06 2012] 8794.210000 total counts/ 6579.070000 bgd. counts: snr = 27.309826
Spatial fit parameters:
  Offset between fit and detection position for source 62 = 2.304108 pixels
  Position = (371.5, 231.7) = 8 48 25.38 -45 42 57.1
  Extent = 37.2 (37.2-74.4)", rotation angle = 0
  Source counts = 2215.1 +/- 93.8
  Background counts = 6579.1
  Rate = 0.06 +/- 0.003
[Sat Jun 16 05:37:06 2012] Spatial fit model total counts = 5344.950000, observed total counts = 5286.000000
[Sat Jun 16 05:37:06 2012] Offset between fit and detection position for source 62 = 1.232745 pixels
[Sat Jun 16 05:37:06 2012] Warning, changing simple spatial fit ID from 33 to 38
[Sat Jun 16 05:37:06 2012] 5294.970000 total counts/ 4235.140000 bgd. counts: snr = 16.285546
Spatial fit parameters:
  Offset between fit and detection position for source 62 = 1.232745 pixels
  Position = (371.1, 230.5) = 8 48 25.54 -45 43 2.2
  Extent = 41.6 (39.6-83.1)" x 18.2 (14.7-21.3)", rotation angle = 45 (39-50) degrees
  Source counts = 1059.8 +/- 72.8
  Background counts = 4235.1
  Rate = 0.03 +/- 0.002
[Sat Jun 16 05:37:06 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 05:37:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 05:37:06 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 05:37:06 2012] Source does appear to be extended
[Sat Jun 16 05:37:06 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.86
[Sat Jun 16 05:37:06 2012] Source is asymmetric
[Sat Jun 16 10:39:01 2012] Counts = 1059.830000, rescaling region sizes by 2.000000
[Sat Jun 16 10:39:01 2012] XMMSAS src. selection expression = ellipse(32235.116000, 20006.318000, 4987.584144, 2180.472063, 44.762000, X, Y)
[Sat Jun 16 10:39:01 2012] Writing source region out to fullrun_mos1_xmm0137550901_pi300-10000_pass1_cl_src62_src.reg
[Sat Jun 16 10:39:01 2012] Extracting stamp from image fullrun_mos1_xmm0137550901_pi300-10000_cl_sm2.00.img.gz, (84, 0) - (595, 517)
[Sat Jun 16 10:39:01 2012] XMMSAS bgd. selection expression = annulus(32235.116000, 20006.318000, 16625.280478, 33250.560957, X, Y) && !ellipse(19744.807129, 25447.441010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30756.384000, 21621.884000, 1408.136041, 1408.136041, 0.000000, X, Y) && !ellipse(26804.274400, 24350.708000, 1136.760033, 1136.760033, 0.000000, X, Y) && !ellipse(26625.314000, 24481.804000, 1109.080032, 1109.080032, 0.000000, X, Y) && !ellipse(25165.618000, 26951.772000, 1144.104033, 1144.104033, 0.000000, X, Y) && !ellipse(26478.372940, 26068.186200, 645.386419, 645.386419, 0.000000, X, Y) && !ellipse(24807.998444, 16494.493713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25868.902000, 25023.930000, 2214.952064, 2214.952064, 0.000000, X, Y) && !ellipse(27495.392800, 24139.046000, 1173.504034, 1173.504034, 0.000000, X, Y) && !ellipse(27711.508000, 23723.566800, 1202.032035, 1202.032035, 0.000000, X, Y) && !ellipse(18067.526886, 28012.841827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31917.922638, 20124.640930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24919.597290, 27333.812775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19192.760000, 26696.950000, 1876.888054, 1876.888054, 0.000000, X, Y) && !ellipse(15856.722000, 22687.778000, 1696.160049, 1696.160049, 0.000000, X, Y) && !ellipse(27023.872620, 25178.929932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28882.831207, 24023.408081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23619.193146, 27705.288544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31194.239898, 21255.072258, 1537.896044, 826.089204, 231.651193, X, Y) && !ellipse(21407.762000, 28741.450000, 1885.072054, 1885.072054, 0.000000, X, Y) && !ellipse(11889.452927, 21547.703445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27856.080933, 22997.119781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28555.758540, 23174.392200, 941.952027, 941.952027, 0.000000, X, Y) && !ellipse(24461.896000, 27526.136000, 2225.944064, 2225.944064, 0.000000, X, Y) && !ellipse(28428.691600, 24792.827400, 1382.480040, 1382.480040, 0.000000, X, Y) && !ellipse(22124.606000, 28248.736000, 1502.328043, 1502.328043, 0.000000, X, Y) && !ellipse(23819.714000, 28213.068000, 1194.848034, 473.275214, 219.208000, X, Y) && !ellipse(21966.434000, 28596.314000, 754.939222, 754.939222, 0.000000, X, Y) && !ellipse(25082.606000, 18504.736000, 1502.328043, 1502.328043, 0.000000, X, Y) && !ellipse(22869.919983, 28617.118530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19244.592000, 26038.236000, 816.472023, 816.472023, 0.000000, X, Y) && !ellipse(31462.378000, 20907.476000, 1488.984043, 1488.984043, 0.000000, X, Y) && !ellipse(29028.617340, 22156.998000, 1098.944032, 1098.944032, 0.000000, X, Y) && !ellipse(22737.196000, 28044.684000, 1044.768030, 1044.768030, 0.000000, X, Y) && !ellipse(18274.822000, 27267.946000, 1570.128045, 1570.128045, 0.000000, X, Y) && !ellipse(22717.568000, 27870.400000, 1251.136036, 1251.136036, 0.000000, X, Y) && !ellipse(33094.428000, 19131.132000, 1662.528048, 1662.528048, 0.000000, X, Y) && !ellipse(20508.482000, 28951.622000, 1416.456041, 1416.456041, 0.000000, X, Y) && !ellipse(29587.074000, 23360.974000, 1297.840037, 853.856025, 48.012000, X, Y) && !ellipse(22946.590000, 27674.096000, 3004.656086, 3004.656086, 0.000000, X, Y) && !ellipse(13126.131058, 33524.658752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28633.238000, 24533.970000, 1262.560036, 1262.560036, 0.000000, X, Y) && !ellipse(17243.020813, 29098.807220, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(18611.096000, 27058.976000, 1380.168040, 1380.168040, 0.000000, X, Y) && !ellipse(20773.040000, 28812.894000, 1424.704041, 1424.704041, 0.000000, X, Y) && !ellipse(16397.600000, 31647.468000, 1743.336050, 1743.336050, 0.000000, X, Y) && !ellipse(17776.560000, 27764.128000, 1546.288044, 1546.288044, 0.000000, X, Y) && !ellipse(22429.280400, 29064.353400, 694.065620, 694.065620, 0.000000, X, Y) && !ellipse(20476.060000, 29102.536000, 1489.864043, 1489.864043, 0.000000, X, Y) && !ellipse(30304.672340, 33757.145400, 662.172651, 662.172651, 0.000000, X, Y) && !ellipse(28509.608000, 22897.577200, 1262.216036, 1262.216036, 0.000000, X, Y)
[Sat Jun 16 10:39:01 2012] Writing fullrun_mos1_xmm0137550901_pi300-10000_pass1_cl_src62.gif
[Sat Jun 16 11:37:22 2012] Mean detx,y = (7129.68, -1624.60) 
[Sat Jun 16 11:37:24 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 16 11:44:52 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 16 11:44:52 2012] Setting source spectrum file to fullrun_mos1_xmm0137550901_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Sat Jun 16 11:44:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0137550901_pi300-10000_pass1_cl_src62_bgd.pi.gz
[Sun Jun 17 15:00:53 2012] Updating aperture counts using extracted products
[Sun Jun 17 15:00:53 2012] Error reading totcts from fullrun_mos1_xmm0137550901_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Sun Jun 17 15:00:54 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 15:00:54 2012] Using photon index=1.80, rate=0.0292, arf fullrun_mos1_xmm0137550901_pi300-10000_pass1_cl_src62.arf
[Sun Jun 17 15:00:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 15:00:54 2012] Updating source flux to 3.4e-13
[Sun Jun 17 15:00:59 2012] Flag b found in src. 62 procflags, skipping spectral fitting
[Sun Jun 17 15:00:59 2012] Flag c found in src. 62 procflags, skipping spectral fitting