[Fri Jun 22 10:16:37 2012] Detection parameters: Position = (267.6, 441.0) = 5 59 54.73 -50 17 0.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 37.7 +/- 7.8 Background counts = 3.7 Rate = 0.005 +/- 0.001 [Fri Jun 22 10:16:38 2012] Off-axis axis estimate = 10.57' [Fri Jun 22 13:50:08 2012] Using EEF radius (= 11.71 ")to estimate initial spatial extent for simple fitting [Fri Jun 22 13:50:08 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Fri Jun 22 13:50:08 2012] Initial guess for spatial extent in simple fitting = 11.71" [Fri Jun 22 13:50:08 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.030 [Fri Jun 22 13:50:08 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 11.71" [Fri Jun 22 14:41:57 2012] fullrun_mos2_xmm0137550201_pi300-10000_cl_pass0_src9.ximg exists [Fri Jun 22 14:41:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0137550201_pi300-10000_cl_pass0_src9.csv [Fri Jun 22 14:41:57 2012] fullrun_mos2_xmm0137550201_pi300-10000_cl_pass0_src9_1.ximg exists [Fri Jun 22 14:41:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0137550201_pi300-10000_cl_pass0_src9.csv [Fri Jun 22 14:41:57 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0137550201_pi300-10000_cl_pass0_src9_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0137550201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jun 22 14:41:57 2012] fullrun_mos2_xmm0137550201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists [Fri Jun 22 14:41:57 2012] fullrun_mos2_xmm0137550201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists [Fri Jun 22 14:41:57 2012] Fit fullrun_mos2_xmm0137550201_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly [Fri Jun 22 14:42:17 2012] Spatial fit model total counts = 64.384100, observed total counts = 64.000000 [Fri Jun 22 14:42:17 2012] Offset between fit and detection position for source 8 = 0.151059 pixels [Fri Jun 22 14:42:17 2012] 65.043100 total counts/ 38.910800 bgd. counts: snr = 4.189311 Spatial fit parameters: Offset between fit and detection position for source 8 = 0.151059 pixels Position = (267.5, 440.9) = 5 59 54.80 -50 17 2.1 Extent = 5.5 (3.4-6.9)", rotation angle = 0 Source counts = 26.1 +/- 8.1 Background counts = 38.9 Rate = 0.002 +/- 0.0006 [Fri Jun 22 14:42:17 2012] Vigneting correction estimate = 1.000000 [Fri Jun 22 14:42:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jun 22 14:42:17 2012] Assessing source extent using major axis lower bound [Fri Jun 22 14:42:17 2012] Source does appear to be extended [Fri Jun 22 14:42:17 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Jun 22 14:42:17 2012] Deleting source due to low Poisson probability 0.8