[Fri Jun 22 10:16:37 2012] Detection parameters:
  Position = (283.8, 305.0) = 5 59 47.40 -50 26 52.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40550.5 +/- 242.2
  Background counts = 7.7
  Rate = 3 +/- 0.02

[Fri Jun 22 10:16:38 2012] Off-axis axis estimate = 1.16'
[Fri Jun 22 13:50:08 2012] Using EEF radius (= 7.01 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 13:50:08 2012] Initial guess for spatial extent in simple fitting = 7.01"
[Fri Jun 22 13:50:08 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.897
[Fri Jun 22 13:50:08 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.01"
[Fri Jun 22 14:41:57 2012] fullrun_mos2_xmm0137550201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 22 14:41:57 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0137550201_pi300-10000_cl_pass0_src1.csv
[Fri Jun 22 14:41:57 2012] fullrun_mos2_xmm0137550201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 22 14:41:57 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0137550201_pi300-10000_cl_pass0_src1.csv
[Fri Jun 22 14:41:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0137550201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0137550201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 14:41:57 2012] fullrun_mos2_xmm0137550201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 22 14:41:57 2012] fullrun_mos2_xmm0137550201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 22 14:41:57 2012] Fit fullrun_mos2_xmm0137550201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun 22 14:42:17 2012] Spatial fit model total counts = 37146.000000, observed total counts = 37146.000000
[Fri Jun 22 14:42:17 2012] Offset between fit and detection position for source 1 = 0.052134 pixels
[Fri Jun 22 14:42:17 2012] 37138.720000 total counts/ 7634.720000 bgd. counts: snr = 337.663675
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.052134 pixels
  Position = (283.8, 305.0) = 5 59 47.42 -50 26 53.3
  Extent = 6.4 (6.3-6.5)", rotation angle = 0
  Source counts = 29504.0 +/- 192.7
  Background counts = 7634.7
  Rate = 2 +/- 0.01
[Fri Jun 22 14:42:17 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 14:42:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 14:42:17 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 14:42:17 2012] Source does appear to be extended
[Fri Jun 22 14:42:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 17:12:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 22 17:12:41 2012] Initial guess for spatial extent in simple fitting = 6.40"
[Fri Jun 22 17:12:41 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.030
[Fri Jun 22 17:12:41 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.40"
[Fri Jun 22 17:31:01 2012] fullrun_mos2_xmm0137550201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 22 17:31:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0137550201_pi300-10000_cl_pass1_src1.csv
[Fri Jun 22 17:31:01 2012] fullrun_mos2_xmm0137550201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 22 17:31:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0137550201_pi300-10000_cl_pass1_src1.csv
[Fri Jun 22 17:31:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0137550201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0137550201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 17:31:01 2012] fullrun_mos2_xmm0137550201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 22 17:31:01 2012] fullrun_mos2_xmm0137550201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 22 17:31:01 2012] Fit fullrun_mos2_xmm0137550201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun 22 17:31:12 2012] Spatial fit model total counts = 37047.000000, observed total counts = 37047.000000
[Fri Jun 22 17:31:12 2012] Offset between fit and detection position for source 1 = 0.016389 pixels
[Fri Jun 22 17:31:12 2012] 37175.520000 total counts/ 7861.620000 bgd. counts: snr = 330.611212
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.016389 pixels
  Position = (283.7, 305.0) = 5 59 47.43 -50 26 53.3
  Extent = 6.4 (6.3-6.4)", rotation angle = 0
  Source counts = 29313.9 +/- 192.8
  Background counts = 7861.6
  Rate = 2 +/- 0.01
[Fri Jun 22 17:31:12 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 17:31:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 17:31:12 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 17:31:12 2012] Source does appear to be extended
[Fri Jun 22 17:31:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 19:01:52 2012] Counts = 29313.900000, rescaling region sizes by 3.000000
[Fri Jun 22 19:01:52 2012] XMMSAS src. selection expression = ellipse(24637.476000, 26490.175200, 1143.729033, 1143.729033, 0.000000, X, Y)
[Fri Jun 22 19:01:52 2012] Writing source region out to fullrun_mos2_xmm0137550201_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun 22 19:01:52 2012] Extracting stamp from image fullrun_mos2_xmm0137550201_pi300-10000_cl_sm2.00.img.gz, (218, 239) - (349, 371)
[Fri Jun 22 19:01:52 2012] XMMSAS bgd. selection expression = annulus(24637.476000, 26490.175200, 5718.645165, 11437.290329, X, Y) && !ellipse(29622.062680, 24673.406600, 373.312811, 373.312811, 0.000000, X, Y)
[Fri Jun 22 19:01:52 2012] Writing fullrun_mos2_xmm0137550201_pi300-10000_pass1_cl_src1.gif
[Fri Jun 22 19:01:57 2012] Mean detx,y = (484.55, -424.46) 
[Fri Jun 22 19:01:58 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 19:06:40 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 19:06:41 2012] Setting source spectrum file to fullrun_mos2_xmm0137550201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 22 19:06:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0137550201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun 22 19:14:31 2012] Updating aperture counts using extracted products
[Fri Jun 22 19:14:31 2012] Error reading totcts from fullrun_mos2_xmm0137550201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 22 19:14:31 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 19:14:31 2012] Using photon index=1.80, rate=2.07, arf fullrun_mos2_xmm0137550201_pi300-10000_pass1_cl_src1.arf
[Fri Jun 22 19:14:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 19:14:31 2012] Updating source flux to 2e-11
[Fri Jun 22 19:15:15 2012] Reading fit data from xmm0137550201/analysis//spectral/fullrun_mos2_xmm0137550201_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jun 22 19:15:15 2012] Spectral fit parameter nH value = 6.09e+18
[Fri Jun 22 19:15:15 2012] Spectral fit parameter PhoIndex value = 2.2146
[Fri Jun 22 19:15:15 2012] Failed to get F(0.3-8.0) from xmm0137550201/analysis//spectral/fullrun_mos2_xmm0137550201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jun 22 19:15:15 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 19:15:15 2012] Using Nh = 6.1e+18, photon index=2.21, rate=2.07, arf fullrun_mos2_xmm0137550201_pi300-10000_pass1_cl_src1.arf
[Fri Jun 22 19:15:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 19:15:15 2012] Updating source flux to 1.7e-11