[Fri Jun 22 10:16:11 2012] Detection parameters:
  Position = (283.7, 305.0) = 5 59 47.47 -50 26 53.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39560.7 +/- 237.5
  Background counts = 7.4
  Rate = 3 +/- 0.02

[Fri Jun 22 10:16:12 2012] Off-axis axis estimate = 1.17'
[Fri Jun 22 13:19:14 2012] Using EEF radius (= 7.02 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 13:19:14 2012] Initial guess for spatial extent in simple fitting = 7.02"
[Fri Jun 22 13:19:14 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.896
[Fri Jun 22 13:19:14 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.02"
[Fri Jun 22 13:50:08 2012] fullrun_mos1_xmm0137550201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 22 13:50:08 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0137550201_pi300-10000_cl_pass0_src1.csv
[Fri Jun 22 13:50:08 2012] fullrun_mos1_xmm0137550201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 22 13:50:08 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0137550201_pi300-10000_cl_pass0_src1.csv
[Fri Jun 22 13:50:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0137550201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0137550201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 13:50:08 2012] fullrun_mos1_xmm0137550201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 22 13:50:08 2012] fullrun_mos1_xmm0137550201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 22 13:50:08 2012] Fit fullrun_mos1_xmm0137550201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun 22 14:42:12 2012] Spatial fit model total counts = 36214.000000, observed total counts = 36246.000000
[Fri Jun 22 14:42:12 2012] Offset between fit and detection position for source 1 = 0.043244 pixels
[Fri Jun 22 14:42:12 2012] 36174.150000 total counts/ 7378.350000 bgd. counts: snr = 335.235129
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.043244 pixels
  Position = (283.7, 305.1) = 5 59 47.46 -50 26 53.2
  Extent = 6.4 (6.4-6.5)", rotation angle = 0
  Source counts = 28795.8 +/- 190.2
  Background counts = 7378.4
  Rate = 2 +/- 0.01
[Fri Jun 22 14:42:12 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 14:42:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 14:42:12 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 14:42:12 2012] Source does appear to be extended
[Fri Jun 22 14:42:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 17:04:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 22 17:04:51 2012] Initial guess for spatial extent in simple fitting = 6.43"
[Fri Jun 22 17:04:51 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.022
[Fri Jun 22 17:04:51 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.43"
[Fri Jun 22 17:12:41 2012] fullrun_mos1_xmm0137550201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 22 17:12:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0137550201_pi300-10000_cl_pass1_src1.csv
[Fri Jun 22 17:12:41 2012] fullrun_mos1_xmm0137550201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 22 17:12:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0137550201_pi300-10000_cl_pass1_src1.csv
[Fri Jun 22 17:12:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0137550201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0137550201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 17:12:41 2012] fullrun_mos1_xmm0137550201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 22 17:12:41 2012] fullrun_mos1_xmm0137550201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 22 17:12:41 2012] Fit fullrun_mos1_xmm0137550201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun 22 17:31:11 2012] Spatial fit model total counts = 36136.400000, observed total counts = 36137.000000
[Fri Jun 22 17:31:11 2012] Offset between fit and detection position for source 1 = 0.015836 pixels
[Fri Jun 22 17:31:11 2012] 36221.170000 total counts/ 7520.870000 bgd. counts: snr = 330.942387
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.015836 pixels
  Position = (283.7, 305.1) = 5 59 47.47 -50 26 53.2
  Extent = 6.4 (6.3-6.5)", rotation angle = 0
  Source counts = 28700.3 +/- 190.3
  Background counts = 7520.9
  Rate = 2 +/- 0.01
[Fri Jun 22 17:31:11 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 17:31:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 17:31:11 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 17:31:11 2012] Source does appear to be extended
[Fri Jun 22 17:31:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 18:42:22 2012] Counts = 28700.300000, rescaling region sizes by 3.000000
[Fri Jun 22 18:42:22 2012] XMMSAS src. selection expression = ellipse(24630.206200, 26491.371000, 1152.210633, 1152.210633, 0.000000, X, Y)
[Fri Jun 22 18:42:22 2012] Writing source region out to fullrun_mos1_xmm0137550201_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun 22 18:42:22 2012] Extracting stamp from image fullrun_mos1_xmm0137550201_pi300-10000_cl_sm2.00.img.gz, (217, 239) - (350, 371)
[Fri Jun 22 18:42:22 2012] XMMSAS bgd. selection expression = annulus(24630.206200, 26491.371000, 5761.053166, 11522.106332, X, Y) && !ellipse(29611.251180, 24666.539800, 358.444010, 358.444010, 0.000000, X, Y)
[Fri Jun 22 18:42:22 2012] Writing fullrun_mos1_xmm0137550201_pi300-10000_pass1_cl_src1.gif
[Fri Jun 22 18:42:26 2012] Mean detx,y = (-194.53, -649.21) 
[Fri Jun 22 18:42:28 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 18:48:34 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 18:48:35 2012] Setting source spectrum file to fullrun_mos1_xmm0137550201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 22 18:48:35 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0137550201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun 22 19:14:31 2012] Updating aperture counts using extracted products
[Fri Jun 22 19:14:31 2012] Error reading totcts from fullrun_mos1_xmm0137550201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 22 19:14:31 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 19:14:31 2012] Using photon index=1.80, rate=2.02, arf fullrun_mos1_xmm0137550201_pi300-10000_pass1_cl_src1.arf
[Fri Jun 22 19:14:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 19:14:31 2012] Updating source flux to 1.9e-11
[Fri Jun 22 19:14:53 2012] Reading fit data from xmm0137550201/analysis//spectral/fullrun_mos1_xmm0137550201_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jun 22 19:14:53 2012] Spectral fit parameter nH value = 3.25614e+19
[Fri Jun 22 19:14:53 2012] Spectral fit parameter PhoIndex value = 2.21479
[Fri Jun 22 19:14:53 2012] Failed to get F(0.3-8.0) from xmm0137550201/analysis//spectral/fullrun_mos1_xmm0137550201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jun 22 19:14:53 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 19:14:53 2012] Using Nh = 3.3e+19, photon index=2.21, rate=2.02, arf fullrun_mos1_xmm0137550201_pi300-10000_pass1_cl_src1.arf
[Fri Jun 22 19:14:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 19:14:53 2012] Updating source flux to 1.6e-11