[Sat May 11 11:04:46 2013] Detection parameters:
  Position = (127.0, 402.0) = 19 12 33.67 5 7 31.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.4 +/- 12.1
  Background counts = 8.9
  Rate = 0.02 +/- 0.003

[Sat May 11 11:04:48 2013] Off-axis axis estimate = 14.52'
[Sat May 11 11:05:00 2013] Using EEF radius (= 13.69 ")to estimate initial spatial extent for simple fitting
[Sat May 11 11:05:00 2013] Initial guess for spatial extent in simple fitting = 13.69"
[Sat May 11 11:05:00 2013] source mask rpix=3.1, npix_max = 53, mask sum = 64, frac = 1.203
[Sat May 11 11:05:00 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 13.69"
[Sat May 11 11:05:01 2013] fullrun_mos2_xmm0137151101_pi300-10000_cl_pass0_src20.ximg exists
[Sat May 11 11:05:01 2013] fullrun_mos2_xmm0137151101_pi300-10000_cl_pass0_src20_1.ximg exists
[Sat May 11 11:05:01 2013] Fit fullrun_mos2_xmm0137151101_pi300-10000_cl_pass0_src20 appears to have run properly
[Sat May 11 11:05:03 2013] fullrun_mos2_xmm0137151101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sat May 11 11:05:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0137151101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sat May 11 11:05:03 2013] fullrun_mos2_xmm0137151101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sat May 11 11:05:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0137151101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sat May 11 11:05:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0137151101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0137151101_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 11:05:16 2013] Source 21 is offset by 2.948414 and 2.007054 pixels which is larger than
2 X fitted extent = 1.561310 x 1.561310, not incorporating fit results
[Sat May 11 11:05:16 2013] Warning, spatial fit 20 centroid is now closest to src. 3
[Sat May 11 11:05:16 2013] Vigneting correction estimate = 1.000000
[Sat May 11 11:05:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 11:05:16 2013] Assessing source extent using major
[Sat May 11 11:05:16 2013] Source does appear to be extended
[Sat May 11 11:05:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 11:05:16 2013] Source is confused with source 25
[Sat May 11 11:05:22 2013] Using EEF radius (= 13.69 ")to estimate initial spatial extent for simple fitting
[Sat May 11 11:05:22 2013] Initial guess for spatial extent in simple fitting = 13.69"
[Sat May 11 11:05:22 2013] source mask rpix=3.1, npix_max = 53, mask sum = 64, frac = 1.203
[Sat May 11 11:05:22 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 13.69"
[Sat May 11 11:05:23 2013] fullrun_mos2_xmm0137151101_pi300-10000_cl_pass1_src15.ximg exists
[Sat May 11 11:05:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0137151101_pi300-10000_cl_pass1_src15.csv
[Sat May 11 11:05:23 2013] fullrun_mos2_xmm0137151101_pi300-10000_cl_pass1_src15_1.ximg exists
[Sat May 11 11:05:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0137151101_pi300-10000_cl_pass1_src15.csv
[Sat May 11 11:05:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0137151101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0137151101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 11:05:24 2013] fullrun_mos2_xmm0137151101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sat May 11 11:05:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0137151101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sat May 11 11:05:24 2013] fullrun_mos2_xmm0137151101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sat May 11 11:05:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0137151101_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sat May 11 11:05:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0137151101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0137151101_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 11:05:38 2013] Warning, spatial fit 15 centroid is now closest to src. 3
[Sat May 11 11:05:38 2013] Vigneting correction estimate = 1.000000
[Sat May 11 11:05:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 11:05:38 2013] Assessing source extent using major
[Sat May 11 11:05:38 2013] Source does appear to be extended
[Sat May 11 11:05:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 11:05:44 2013] XMMSAS src. selection expression = ellipse(10996.840042, 34926.941681, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 11 11:05:44 2013] Not overwriting source region fullrun_mos2_xmm0137151101_pi300-10000_pass1_cl_src21_src.reg
[Sat May 11 11:05:44 2013] Extracting stamp from image fullrun_mos2_xmm0137151101_pi300-10000_cl_sm2.00.img.gz, (89, 365) - (164, 440)
[Sat May 11 11:05:44 2013] XMMSAS bgd. selection expression = annulus(10996.840042, 34926.941681, 1087.500000, 2175.000000, X, Y) && !ellipse(11293.333801, 35861.676605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10324.992000, 33766.278000, 1930.616056, 1930.616056, 0.000000, X, Y) && !ellipse(11869.432678, 35793.325531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12599.171463, 35710.953247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13100.914917, 35688.350983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14223.920000, 35389.855000, 1865.968054, 1865.968054, 0.000000, X, Y) && !ellipse(12296.822037, 35021.545685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13625.753143, 35192.964996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12742.261612, 35014.047882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14742.192000, 35243.799400, 1706.760049, 1706.760049, 0.000000, X, Y) && !ellipse(11443.998749, 34501.818390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12431.550171, 34415.784821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10991.135712, 33886.610931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14282.731080, 33741.278000, 1842.461191, 868.527224, 89.902996, X, Y) && !ellipse(13599.034000, 34293.006000, 1418.064041, 1418.064041, 0.000000, X, Y) && !ellipse(11544.122559, 33645.348419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12619.747940, 33974.380890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13718.793335, 33296.570496, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 11 11:05:44 2013] Writing fullrun_mos2_xmm0137151101_pi300-10000_pass1_cl_src21.gif
[Sat May 11 11:05:46 2013] ../../xmm0137151101/products/events/fullrun_mos2_xmm0137151101_pi300-10000_pass1_cl_src21_src.evt and ../../xmm0137151101/products/events/fullrun_mos2_xmm0137151101_pi300-10000_pass1_cl_src21_bgd.evt exist, delete to re-create
[Sat May 11 11:05:46 2013] Mean detx,y = (-15980.50, -4206.16) 
[Sat May 11 11:05:46 2013] ../../xmm0137151101/products/images/fullrun_mos2_xmm0137151101_pi300-10000_pass1_cl_src21_src.img and ../../xmm0137151101/products/images/fullrun_mos2_xmm0137151101_pi300-10000_pass1_cl_src21_bgd.img exist, delete to re-create
[Sat May 11 11:05:46 2013] ../../xmm0137151101/products/spectra/fullrun_mos2_xmm0137151101_pi300-10000_pass1_cl_src21_src.pi and ../../xmm0137151101/products/spectra/fullrun_mos2_xmm0137151101_pi300-10000_pass1_cl_src21_bgd.pi exist, delete to re-create
[Sat May 11 11:05:46 2013] Setting source spectrum file to fullrun_mos2_xmm0137151101_pi300-10000_pass1_cl_src21_src.pi.gz
[Sat May 11 11:05:46 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0137151101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Sat May 11 11:05:46 2013] ../../xmm0137151101/products/lightcurves/fullrun_mos2_xmm0137151101_pi300-10000_pass1_cl_src21_src.lc and ../../xmm0137151101/products/lightcurves/fullrun_mos2_xmm0137151101_pi300-10000_pass1_cl_src21_bgd.lc exist, delete to re-create
[Sat May 11 11:07:08 2013] Not generating rmf since there are only 62 counts
[Sat May 11 11:07:08 2013] rmf not generated due to insufficient counts
[Sat May 11 11:07:31 2013] Updating aperture counts using extracted products
[Sat May 11 11:07:31 2013] Total counts from fullrun_mos2_xmm0137151101_pi300-10000_pass1_cl_src21_src.pi.gz = 301.00
[Sat May 11 11:07:31 2013] Total counts from fullrun_mos2_xmm0137151101_pi300-10000_pass1_cl_src21_bgd.pi.gz = 0.00
[Sat May 11 11:07:31 2013] Got source and background scale factors 1278122.000000, 78347.000000
[Sat May 11 11:07:31 2013] User source parameters:
  Position = (127.0, 402.0) = 19 12 33.67 5 7 31.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 301.0 +/- 18.4
  Background aperture counts = 0.0
  Rate = 0.08 +/- 0.005

[Sat May 11 11:07:31 2013] Updating counts from extracted products
[Sat May 11 11:07:36 2013] No arf file for this source, not re-computing flux
[Sat May 11 11:07:37 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 11 11:07:38 2013] xmm0137151101/analysis//spectral/fullrun_mos2_xmm0137151101_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete