[Sat Aug 18 10:09:44 2012] Detection parameters:
  Position = (415.9, 418.2) = 19 11 9.55 5 8 39.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.9 +/- 14.3
  Background counts = 29.7
  Rate = 0.008 +/- 0.001

[Sat Aug 18 10:09:47 2012] Off-axis axis estimate = 12.16'
[Sat Aug 18 10:11:59 2012] Using EEF radius (= 12.51 ")to estimate initial spatial extent for simple fitting
[Sat Aug 18 10:11:59 2012] Initial guess for spatial extent in simple fitting = 12.51"
[Sat Aug 18 10:11:59 2012] source mask rpix=2.9, npix_max = 45, mask sum = 47, frac = 1.031
[Sat Aug 18 10:11:59 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 12.51"
[Sat Aug 18 19:05:26 2012] fullrun_mos2_xmm0137151001_pi300-10000_cl_pass0_src42.ximg exists
[Sat Aug 18 19:05:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0137151001_pi300-10000_cl_pass0_src42.csv
[Sat Aug 18 19:05:26 2012] fullrun_mos2_xmm0137151001_pi300-10000_cl_pass0_src42_1.ximg exists
[Sat Aug 18 19:05:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0137151001_pi300-10000_cl_pass0_src42.csv
[Sat Aug 18 19:05:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0137151001_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0137151001_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 19:05:29 2012] fullrun_mos2_xmm0137151001_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Sat Aug 18 19:05:29 2012] fullrun_mos2_xmm0137151001_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Sat Aug 18 19:05:29 2012] Fit fullrun_mos2_xmm0137151001_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly
[Sat Aug 18 19:05:55 2012] Spatial fit model total counts = 575.098000, observed total counts = 562.000000
[Sat Aug 18 19:05:55 2012] Offset between fit and detection position for source 42 = 3.935012 pixels
[Sat Aug 18 19:05:55 2012] Warning, changing simple spatial fit ID from 42 to 34
[Sat Aug 18 19:05:55 2012] 503.789000 total counts/ 265.125000 bgd. counts: snr = 14.657556
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 3.935012 pixels
  Position = (412.8, 420.6) = 19 11 10.45 5 8 48.7
  Extent = 25.2 (25.1-50.3)", rotation angle = 0
  Source counts = 238.7 +/- 22.4
  Background counts = 265.1
  Rate = 0.02 +/- 0.002
[Sat Aug 18 19:05:55 2012] Source 42 is offset by -1.148920 and -3.557126 pixels which is larger than
2 X fitted extent = 1.426612 x 1.426612, not incorporating fit results
[Sat Aug 18 19:05:55 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 19:05:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 19:05:55 2012] Assessing source extent using major axis lower bound
[Sat Aug 18 19:05:55 2012] Source does appear to be extended
[Sat Aug 18 19:05:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 19:05:55 2012] Source is confused with source 34
[Sat Aug 18 19:06:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 18 19:06:06 2012] Initial guess for spatial extent in simple fitting = 25.16"
[Sat Aug 18 19:06:06 2012] source mask rpix=5.8, npix_max = 157, mask sum = 161, frac = 1.019
[Sat Aug 18 19:06:06 2012] Giving source the simple spatial ID 36 for pass 1, mean size = 25.16"
[Sun Aug 19 03:44:16 2012] fullrun_mos2_xmm0137151001_pi300-10000_cl_pass1_src36.ximg exists
[Sun Aug 19 03:44:16 2012] fullrun_mos2_xmm0137151001_pi300-10000_cl_pass1_src36_1.ximg exists
[Sun Aug 19 03:44:16 2012] Fit fullrun_mos2_xmm0137151001_pi300-10000_cl_pass1_src36 appears to have run properly
[Sun Aug 19 03:44:19 2012] fullrun_mos2_xmm0137151001_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Sun Aug 19 03:44:19 2012] fullrun_mos2_xmm0137151001_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Sun Aug 19 03:44:19 2012] Fit fullrun_mos2_xmm0137151001_pi300-10000_cl_pass1_tfrozen_src36 appears to have run properly
[Sun Aug 19 03:44:45 2012] Warning, spatial fit 36 centroid is now closest to src. 27
[Sun Aug 19 03:44:45 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 03:44:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 03:44:45 2012] Assessing source extent using major axis lower bound
[Sun Aug 19 03:44:45 2012] Source does appear to be extended
[Sun Aug 19 03:44:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 03:44:55 2012] XMMSAS src. selection expression = ellipse(35861.712000, 36547.542000, 1509.600043, 1509.600043, 0.000000, X, Y)
[Sun Aug 19 03:44:55 2012] Writing source region out to fullrun_mos2_xmm0137151001_pi300-10000_pass1_cl_src42_src.reg
[Sun Aug 19 03:44:55 2012] Extracting stamp from image fullrun_mos2_xmm0137151001_pi300-10000_cl_sm2.00.img.gz, (326, 334) - (500, 507)
[Sun Aug 19 03:44:55 2012] XMMSAS bgd. selection expression = annulus(35861.712000, 36547.542000, 2516.000072, 5032.000145, X, Y) && !ellipse(31832.836914, 38749.902435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31880.938080, 39256.720978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32685.616394, 39011.863556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32598.486298, 38407.602783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31658.088196, 38148.211731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34402.058319, 38060.160339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34985.736000, 37841.948000, 4025.600116, 4025.600116, 0.000000, X, Y) && !ellipse(31818.398865, 37703.773102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34338.820831, 37458.830719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32638.088715, 37370.285492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31363.648000, 37492.932000, 1237.408036, 1237.408036, 0.000000, X, Y) && !ellipse(35545.048000, 37447.054000, 2011.440058, 2011.440058, 0.000000, X, Y) && !ellipse(33522.672791, 37377.541687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34012.791199, 37104.485199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35028.031921, 37005.633148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35078.926178, 36412.175690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32290.091370, 36413.750122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33558.396210, 36152.747467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30756.474762, 39079.750000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31083.383209, 38491.108765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33467.928000, 38353.228000, 1914.024055, 1914.024055, 0.000000, X, Y) && !ellipse(31331.102753, 36942.456726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30673.574127, 37461.029083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32237.171326, 37272.285706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31966.866000, 37034.236000, 1435.648041, 1435.648041, 0.000000, X, Y) && !ellipse(34376.466492, 35747.088196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32886.713623, 35830.782684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35356.510000, 29855.986200, 1739.400050, 1739.400050, 0.000000, X, Y)
[Sun Aug 19 03:44:55 2012] Writing fullrun_mos2_xmm0137151001_pi300-10000_pass1_cl_src42.gif
[Sun Aug 19 04:05:31 2012] Mean detx,y = (6113.45, -14816.18) 
[Sun Aug 19 04:05:32 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 19 04:05:58 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 19 04:05:59 2012] Setting source spectrum file to fullrun_mos2_xmm0137151001_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Sun Aug 19 04:05:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0137151001_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Sun Aug 19 04:42:03 2012] Updating aperture counts using extracted products
[Sun Aug 19 04:42:03 2012] Error reading totcts from fullrun_mos2_xmm0137151001_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Sun Aug 19 04:42:04 2012] No arf file for this source, not re-computing flux
[Sun Aug 19 04:42:05 2012] Flag b found in src. 42 procflags, skipping spectral fitting
[Sun Aug 19 04:42:05 2012] Flag c found in src. 42 procflags, skipping spectral fitting
[Sun Aug 19 04:42:05 2012] Source 42 has no response, skipping
[Sun Aug 19 04:42:06 2012] xmm0137151001/analysis//spectral/fullrun_mos2_xmm0137151001_pi300-10000_pass1_cl_src42_pl.csv not found, spectral fit skipped or did not complete