[Sun Jun 17 10:16:01 2012] Detection parameters:
  Position = (390.5, 308.7) = 9 9 1.31 -9 41 8.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.3 +/- 22.9
  Background counts = 224.2
  Rate = 0.01 +/- 0.003

[Sun Jun 17 10:16:01 2012] Off-axis axis estimate = 6.71'
[Sun Jun 17 10:19:18 2012] Using EEF radius (= 9.79 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 10:19:18 2012] Initial guess for spatial extent in simple fitting = 9.79"
[Sun Jun 17 10:19:18 2012] source mask rpix=2.2, npix_max = 30, mask sum = 25, frac = 0.827
[Sun Jun 17 10:19:18 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 9.79"
[Sun Jun 17 13:59:11 2012] fullrun_pn_xmm0136740101_pi300-10000_cl_pass0_src47.ximg exists
[Sun Jun 17 13:59:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136740101_pi300-10000_cl_pass0_src47.csv
[Sun Jun 17 13:59:11 2012] fullrun_pn_xmm0136740101_pi300-10000_cl_pass0_src47_1.ximg exists
[Sun Jun 17 13:59:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136740101_pi300-10000_cl_pass0_src47.csv
[Sun Jun 17 13:59:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136740101_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136740101_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 13:59:13 2012] fullrun_pn_xmm0136740101_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Sun Jun 17 13:59:13 2012] fullrun_pn_xmm0136740101_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Sun Jun 17 13:59:13 2012] Fit fullrun_pn_xmm0136740101_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Sun Jun 17 19:42:51 2012] Spatial fit model total counts = 2968.460000, observed total counts = 2968.000000
[Sun Jun 17 19:42:51 2012] Offset between fit and detection position for source 52 = 4.182097 pixels
[Sun Jun 17 19:42:51 2012] 2924.826000 total counts/ 2683.390000 bgd. counts: snr = 4.660796
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 4.182097 pixels
  Position = (394.3, 307.1) = 9 9 0.17 -9 41 11.6
  Extent = 19.6 (19.5-39.1)", rotation angle = 0
  Source counts = 241.4 +/- 54.1
  Background counts = 2683.4
  Rate = 0.02 +/- 0.004
[Sun Jun 17 19:42:51 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 19:42:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 19:42:51 2012] Assessing source extent using major axis lower bound
[Sun Jun 17 19:42:51 2012] Source does appear to be extended
[Sun Jun 17 19:42:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 19:43:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 17 19:43:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 17 19:43:25 2012] Initial guess for spatial extent in simple fitting = 19.57"
[Sun Jun 17 19:43:25 2012] source mask rpix=4.5, npix_max = 99, mask sum = 100, frac = 1.000
[Sun Jun 17 19:43:25 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 19.57"
[Sun Jun 17 22:04:01 2012] fullrun_pn_xmm0136740101_pi300-10000_cl_pass1_src35.ximg exists
[Sun Jun 17 22:04:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136740101_pi300-10000_cl_pass1_src35.csv
[Sun Jun 17 22:04:01 2012] fullrun_pn_xmm0136740101_pi300-10000_cl_pass1_src35_1.ximg exists
[Sun Jun 17 22:04:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136740101_pi300-10000_cl_pass1_src35.csv
[Sun Jun 17 22:04:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136740101_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136740101_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 22:04:01 2012] fullrun_pn_xmm0136740101_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Sun Jun 17 22:04:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136740101_pi300-10000_cl_pass1_tfrozen_src35.csv
[Sun Jun 17 22:04:01 2012] fullrun_pn_xmm0136740101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Sun Jun 17 22:04:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136740101_pi300-10000_cl_pass1_tfrozen_src35.csv
[Sun Jun 17 22:04:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136740101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136740101_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 01:35:44 2012] Warning, spatial fit 35 centroid is now closest to src. 53
[Mon Jun 18 01:35:44 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 01:35:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 01:35:44 2012] Assessing source extent using major axis lower bound
[Mon Jun 18 01:35:44 2012] Source does appear to be extended
[Mon Jun 18 01:35:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 01:36:13 2012] XMMSAS src. selection expression = ellipse(34256.604000, 26669.981800, 1174.224034, 1174.224034, 0.000000, X, Y)
[Mon Jun 18 01:36:13 2012] Writing source region out to fullrun_pn_xmm0136740101_pi300-10000_pass1_cl_src52_src.reg
[Mon Jun 18 01:36:13 2012] Extracting stamp from image fullrun_pn_xmm0136740101_pi300-10000_cl_sm2.00.img.gz, (327, 240) - (462, 375)
[Mon Jun 18 01:36:13 2012] XMMSAS bgd. selection expression = annulus(34256.604000, 26669.981800, 1957.040056, 3914.080113, X, Y) && !ellipse(31760.827209, 27795.209076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28341.030000, 26950.918000, 2444.640070, 2444.640070, 0.000000, X, Y) && !ellipse(28709.804000, 26957.924000, 2481.024071, 2481.024071, 0.000000, X, Y) && !ellipse(29188.223000, 26690.126600, 1240.512036, 1240.512036, 0.000000, X, Y) && !ellipse(31117.139252, 23982.746307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30225.766266, 24403.711823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30619.002655, 27103.727936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32000.767517, 27287.729431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30770.089752, 26576.319641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31054.000000, 26222.685669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30426.167877, 25090.822784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33148.900000, 28294.192000, 1479.176043, 1479.176043, 0.000000, X, Y) && !ellipse(32470.168732, 27694.076355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31211.382172, 27528.938843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31437.094177, 26659.756592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32895.305298, 26179.113983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31547.150452, 25620.548920, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 18 01:36:13 2012] Writing fullrun_pn_xmm0136740101_pi300-10000_pass1_cl_src52.gif
[Mon Jun 18 02:16:30 2012] Mean detx,y = (6879.57, 3714.51) 
[Mon Jun 18 02:16:31 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 18 02:16:49 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 18 02:16:50 2012] Setting source spectrum file to fullrun_pn_xmm0136740101_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Mon Jun 18 02:16:50 2012] Setting bgd. spectrum file to fullrun_pn_xmm0136740101_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Tue Jun 19 23:00:43 2012] Updating aperture counts using extracted products
[Tue Jun 19 23:00:43 2012] Error reading totcts from fullrun_pn_xmm0136740101_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Tue Jun 19 23:00:44 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 23:00:44 2012] Using photon index=1.80, rate=0.0187, arf fullrun_pn_xmm0136740101_pi300-10000_pass1_cl_src52.arf
[Tue Jun 19 23:00:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 23:00:44 2012] Updating source flux to 6.2e-14