[Sun Jun 17 10:16:00 2012] Detection parameters:
  Position = (307.2, 341.2) = 9 9 25.81 -9 38 43.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 314.4 +/- 28.0
  Background counts = 200.6
  Rate = 0.03 +/- 0.003

[Sun Jun 17 10:16:01 2012] Off-axis axis estimate = 3.16'
[Sun Jun 17 10:19:18 2012] Using EEF radius (= 8.01 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 10:19:18 2012] Initial guess for spatial extent in simple fitting = 8.01"
[Sun Jun 17 10:19:18 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.730
[Sun Jun 17 10:19:18 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 8.01"
[Sun Jun 17 13:59:11 2012] fullrun_pn_xmm0136740101_pi300-10000_cl_pass0_src19.ximg exists
[Sun Jun 17 13:59:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136740101_pi300-10000_cl_pass0_src19.csv
[Sun Jun 17 13:59:11 2012] fullrun_pn_xmm0136740101_pi300-10000_cl_pass0_src19_1.ximg exists
[Sun Jun 17 13:59:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136740101_pi300-10000_cl_pass0_src19.csv
[Sun Jun 17 13:59:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136740101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136740101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 13:59:12 2012] fullrun_pn_xmm0136740101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sun Jun 17 13:59:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136740101_pi300-10000_cl_pass0_tfrozen_src19.csv
[Sun Jun 17 13:59:12 2012] fullrun_pn_xmm0136740101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sun Jun 17 13:59:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136740101_pi300-10000_cl_pass0_tfrozen_src19.csv
[Sun Jun 17 13:59:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136740101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136740101_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 19:42:51 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 11.143794 pixels away
[Sun Jun 17 19:42:51 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 19:42:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 19:42:51 2012] Assessing source extent using major
[Sun Jun 17 19:42:51 2012] Source does appear to be extended
[Sun Jun 17 19:42:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 19:42:51 2012] Source is confused with source 20
[Sun Jun 17 19:43:25 2012] Using EEF radius (= 8.01 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 19:43:25 2012] Initial guess for spatial extent in simple fitting = 8.01"
[Sun Jun 17 19:43:25 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.730
[Sun Jun 17 19:43:25 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 8.01"
[Sun Jun 17 22:04:01 2012] fullrun_pn_xmm0136740101_pi300-10000_cl_pass1_src16.ximg exists
[Sun Jun 17 22:04:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136740101_pi300-10000_cl_pass1_src16.csv
[Sun Jun 17 22:04:01 2012] fullrun_pn_xmm0136740101_pi300-10000_cl_pass1_src16_1.ximg exists
[Sun Jun 17 22:04:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136740101_pi300-10000_cl_pass1_src16.csv
[Sun Jun 17 22:04:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136740101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136740101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 22:04:01 2012] fullrun_pn_xmm0136740101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Sun Jun 17 22:04:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136740101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Sun Jun 17 22:04:01 2012] fullrun_pn_xmm0136740101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Sun Jun 17 22:04:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136740101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Sun Jun 17 22:04:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136740101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136740101_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 01:35:44 2012] Spatial fit model total counts = 3617.770000, observed total counts = 2643.000000
[Mon Jun 18 01:35:44 2012] Poor agreement between spatial fit and data for source 21
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 18 01:35:44 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 01:35:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 01:35:44 2012] Assessing source extent using major
[Mon Jun 18 01:35:44 2012] Source does appear to be extended
[Mon Jun 18 01:35:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 01:36:13 2012] XMMSAS src. selection expression = ellipse(26675.084076, 29631.708771, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 18 01:36:13 2012] Writing source region out to fullrun_pn_xmm0136740101_pi300-10000_pass1_cl_src21_src.reg
[Mon Jun 18 01:36:13 2012] Extracting stamp from image fullrun_pn_xmm0136740101_pi300-10000_cl_sm2.00.img.gz, (270, 304) - (345, 379)
[Mon Jun 18 01:36:13 2012] XMMSAS bgd. selection expression = annulus(26675.084076, 29631.708771, 1087.500000, 2175.000000, X, Y) && !ellipse(26840.839200, 28458.124000, 2356.448068, 2356.448068, 0.000000, X, Y) && !ellipse(27428.666351, 28481.802307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28156.132800, 28345.466000, 1223.344035, 1223.344035, 0.000000, X, Y) && !ellipse(26741.857800, 28294.954200, 1191.064034, 1191.064034, 0.000000, X, Y) && !ellipse(26973.426000, 28092.538000, 1160.264033, 1160.264033, 0.000000, X, Y) && !ellipse(28341.030000, 26950.918000, 2444.640070, 2444.640070, 0.000000, X, Y) && !ellipse(28709.804000, 26957.924000, 2481.024071, 2481.024071, 0.000000, X, Y) && !ellipse(27973.568000, 27286.820800, 1222.320035, 1222.320035, 0.000000, X, Y) && !ellipse(29188.223000, 26690.126600, 1240.512036, 1240.512036, 0.000000, X, Y) && !ellipse(27313.937225, 29644.182098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26042.711853, 29190.541138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26067.969147, 28053.755829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26740.280975, 27710.407440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25533.516000, 25628.350000, 2071.792060, 2071.792060, 0.000000, X, Y)
[Mon Jun 18 01:36:13 2012] Writing fullrun_pn_xmm0136740101_pi300-10000_pass1_cl_src21.gif
[Mon Jun 18 02:10:45 2012] Mean detx,y = (1051.50, -1723.37) 
[Mon Jun 18 02:10:47 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 18 02:11:03 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 18 02:11:03 2012] Setting source spectrum file to fullrun_pn_xmm0136740101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Mon Jun 18 02:11:03 2012] Setting bgd. spectrum file to fullrun_pn_xmm0136740101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Tue Jun 19 16:30:30 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 19 16:30:30 2012] rmf not generated due to insufficient counts
[Tue Jun 19 23:00:43 2012] Updating aperture counts using extracted products
[Tue Jun 19 23:00:43 2012] Error reading totcts from fullrun_pn_xmm0136740101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue Jun 19 23:00:43 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 23:00:43 2012] Using photon index=1.80, rate=0.0318, arf fullrun_pn_xmm0136740101_pi300-10000_pass1_cl_src21.arf
[Tue Jun 19 23:00:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 23:00:43 2012] Updating source flux to 9.1e-14
[Tue Jun 19 23:05:17 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting