[Sun Jun 17 10:16:00 2012] Detection parameters:
  Position = (323.0, 306.0) = 9 9 21.14 -9 41 16.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 675.3 +/- 44.3
  Background counts = 298.0
  Rate = 0.06 +/- 0.004

[Sun Jun 17 10:16:01 2012] Off-axis axis estimate = 1.87'
[Sun Jun 17 10:19:18 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 10:19:18 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Sun Jun 17 10:19:18 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.832
[Sun Jun 17 10:19:18 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 7.36"
[Sun Jun 17 13:59:11 2012] fullrun_pn_xmm0136740101_pi300-10000_cl_pass0_src13.ximg exists
[Sun Jun 17 13:59:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136740101_pi300-10000_cl_pass0_src13.csv
[Sun Jun 17 13:59:11 2012] fullrun_pn_xmm0136740101_pi300-10000_cl_pass0_src13_1.ximg exists
[Sun Jun 17 13:59:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136740101_pi300-10000_cl_pass0_src13.csv
[Sun Jun 17 13:59:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136740101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136740101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 13:59:12 2012] fullrun_pn_xmm0136740101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sun Jun 17 13:59:12 2012] fullrun_pn_xmm0136740101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sun Jun 17 13:59:12 2012] Fit fullrun_pn_xmm0136740101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Sun Jun 17 19:42:51 2012] Source 14 is offset by 0.297126 and -2.999353 pixels which is larger than
2 X fitted extent = 1.240782 x 1.240782, not incorporating fit results
[Sun Jun 17 19:42:51 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 19:42:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 19:42:51 2012] Assessing source extent using major
[Sun Jun 17 19:42:51 2012] Source does appear to be extended
[Sun Jun 17 19:42:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 19:42:51 2012] Source is confused with source 10
[Sun Jun 17 19:42:51 2012] Source is confused with source 11
[Sun Jun 17 19:43:25 2012] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 19:43:25 2012] Initial guess for spatial extent in simple fitting = 7.36"
[Sun Jun 17 19:43:25 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.832
[Sun Jun 17 19:43:25 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 7.36"
[Sun Jun 17 22:04:01 2012] fullrun_pn_xmm0136740101_pi300-10000_cl_pass1_src11.ximg exists
[Sun Jun 17 22:04:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136740101_pi300-10000_cl_pass1_src11.csv
[Sun Jun 17 22:04:01 2012] fullrun_pn_xmm0136740101_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun Jun 17 22:04:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136740101_pi300-10000_cl_pass1_src11.csv
[Sun Jun 17 22:04:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136740101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136740101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 22:04:01 2012] fullrun_pn_xmm0136740101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun Jun 17 22:04:01 2012] fullrun_pn_xmm0136740101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Jun 17 22:04:01 2012] Fit fullrun_pn_xmm0136740101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Mon Jun 18 01:35:44 2012] Warning, spatial fit 11 centroid is now closest to src. 7
[Mon Jun 18 01:35:44 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 01:35:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 01:35:44 2012] Assessing source extent using major
[Mon Jun 18 01:35:44 2012] Source does appear to be extended
[Mon Jun 18 01:35:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 01:36:12 2012] XMMSAS src. selection expression = ellipse(28055.239990, 26574.904510, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 18 01:36:12 2012] Writing source region out to fullrun_pn_xmm0136740101_pi300-10000_pass1_cl_src14_src.reg
[Mon Jun 18 01:36:12 2012] Extracting stamp from image fullrun_pn_xmm0136740101_pi300-10000_cl_sm2.00.img.gz, (286, 269) - (361, 344)
[Mon Jun 18 01:36:13 2012] XMMSAS bgd. selection expression = annulus(28055.239990, 26574.904510, 1087.500000, 2175.000000, X, Y) && !ellipse(26840.839200, 28458.124000, 2356.448068, 2356.448068, 0.000000, X, Y) && !ellipse(27428.666351, 28481.802307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28156.132800, 28345.466000, 1223.344035, 1223.344035, 0.000000, X, Y) && !ellipse(26741.857800, 28294.954200, 1191.064034, 1191.064034, 0.000000, X, Y) && !ellipse(26973.426000, 28092.538000, 1160.264033, 1160.264033, 0.000000, X, Y) && !ellipse(28341.030000, 26950.918000, 2444.640070, 2444.640070, 0.000000, X, Y) && !ellipse(28709.804000, 26957.924000, 2481.024071, 2481.024071, 0.000000, X, Y) && !ellipse(27973.568000, 27286.820800, 1222.320035, 1222.320035, 0.000000, X, Y) && !ellipse(29188.223000, 26690.126600, 1240.512036, 1240.512036, 0.000000, X, Y) && !ellipse(30225.766266, 24403.711823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28931.166620, 24069.669800, 447.246413, 447.246413, 0.000000, X, Y) && !ellipse(26042.711853, 29190.541138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26067.969147, 28053.755829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26740.280975, 27710.407440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30619.002655, 27103.727936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30770.089752, 26576.319641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31054.000000, 26222.685669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28389.255951, 25456.322083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30426.167877, 25090.822784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26134.315674, 26315.694000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25533.516000, 25628.350000, 2071.792060, 2071.792060, 0.000000, X, Y) && !ellipse(27815.573151, 25188.272980, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 18 01:36:13 2012] Writing fullrun_pn_xmm0136740101_pi300-10000_pass1_cl_src14.gif
[Mon Jun 18 02:08:14 2012] Mean detx,y = (1193.02, 1611.35) 
[Mon Jun 18 02:08:15 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 18 02:08:24 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 18 02:08:24 2012] Setting source spectrum file to fullrun_pn_xmm0136740101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon Jun 18 02:08:24 2012] Setting bgd. spectrum file to fullrun_pn_xmm0136740101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Tue Jun 19 16:21:49 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 19 16:21:49 2012] rmf not generated due to insufficient counts
[Tue Jun 19 23:00:43 2012] Updating aperture counts using extracted products
[Tue Jun 19 23:00:43 2012] Error reading totcts from fullrun_pn_xmm0136740101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Tue Jun 19 23:00:43 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 23:00:43 2012] Using photon index=1.80, rate=0.0601, arf fullrun_pn_xmm0136740101_pi300-10000_pass1_cl_src14.arf
[Tue Jun 19 23:00:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 23:00:43 2012] Updating source flux to 1.5e-13
[Tue Jun 19 23:05:17 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting