[Sun Jun 17 10:17:14 2012] Detection parameters:
  Position = (340.0, 292.2) = 9 9 16.16 -9 42 20.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 108.8 +/- 21.1
  Background counts = 117.1
  Rate = 0.008 +/- 0.002

[Sun Jun 17 10:17:14 2012] Off-axis axis estimate = 3.04'
[Sun Jun 17 17:26:05 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 17:26:05 2012] Initial guess for spatial extent in simple fitting = 7.95"
[Sun Jun 17 17:26:05 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.923
[Sun Jun 17 17:26:05 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 7.95"
[Sun Jun 17 19:42:31 2012] fullrun_mos2_xmm0136740101_pi300-10000_cl_pass0_src39.ximg exists
[Sun Jun 17 19:42:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136740101_pi300-10000_cl_pass0_src39.csv
[Sun Jun 17 19:42:31 2012] fullrun_mos2_xmm0136740101_pi300-10000_cl_pass0_src39_1.ximg exists
[Sun Jun 17 19:42:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136740101_pi300-10000_cl_pass0_src39.csv
[Sun Jun 17 19:42:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136740101_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136740101_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 19:42:32 2012] fullrun_mos2_xmm0136740101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Sun Jun 17 19:42:32 2012] fullrun_mos2_xmm0136740101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Sun Jun 17 19:42:32 2012] Fit fullrun_mos2_xmm0136740101_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Sun Jun 17 19:43:12 2012] Warning, spatial fit 39 centroid is now closest to src. 40
[Sun Jun 17 19:43:12 2012] Source 44 is offset by -1.396636 and -2.449282 pixels which is larger than
2 X fitted extent = 2.304538 x 2.304538, not incorporating fit results
[Sun Jun 17 19:43:12 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 19:43:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 19:43:12 2012] Assessing source extent using major
[Sun Jun 17 19:43:12 2012] Source does appear to be extended
[Sun Jun 17 19:43:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 19:43:12 2012] Source is confused with source 41
[Sun Jun 17 23:53:06 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 23:53:06 2012] Initial guess for spatial extent in simple fitting = 7.95"
[Sun Jun 17 23:53:06 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.923
[Sun Jun 17 23:53:06 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 7.95"
[Mon Jun 18 01:35:32 2012] fullrun_mos2_xmm0136740101_pi300-10000_cl_pass1_src31.ximg exists
[Mon Jun 18 01:35:32 2012] fullrun_mos2_xmm0136740101_pi300-10000_cl_pass1_src31_1.ximg exists
[Mon Jun 18 01:35:32 2012] Fit fullrun_mos2_xmm0136740101_pi300-10000_cl_pass1_src31 appears to have run properly
[Mon Jun 18 01:35:32 2012] fullrun_mos2_xmm0136740101_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Mon Jun 18 01:35:32 2012] fullrun_mos2_xmm0136740101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Mon Jun 18 01:35:32 2012] Fit fullrun_mos2_xmm0136740101_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Mon Jun 18 01:36:00 2012] Source 44 is offset by 0.277086 and -7.699305 pixels which is larger than
2 X fitted extent = 7.311265 x 7.311265, not incorporating fit results
[Mon Jun 18 01:36:00 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 01:36:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 01:36:00 2012] Assessing source extent using major
[Mon Jun 18 01:36:00 2012] Source does appear to be extended
[Mon Jun 18 01:36:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 18:47:17 2012] XMMSAS src. selection expression = ellipse(29528.600708, 25371.520447, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 19 18:47:17 2012] Writing source region out to fullrun_mos2_xmm0136740101_pi300-10000_pass1_cl_src44_src.reg
[Tue Jun 19 18:47:17 2012] Extracting stamp from image fullrun_mos2_xmm0136740101_pi300-10000_cl_sm2.00.img.gz, (302, 255) - (377, 330)
[Tue Jun 19 18:47:17 2012] XMMSAS bgd. selection expression = annulus(29528.600708, 25371.520447, 1087.500000, 2175.000000, X, Y) && !ellipse(28727.901800, 26806.674000, 1222.280035, 1222.280035, 0.000000, X, Y) && !ellipse(30232.693620, 24370.468200, 334.213610, 334.213610, 0.000000, X, Y) && !ellipse(26858.549255, 27611.998779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27974.465400, 26723.552400, 1182.272034, 1182.272034, 0.000000, X, Y) && !ellipse(27588.804443, 28048.251953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27007.881378, 27085.878174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28115.816000, 28178.068000, 2485.408072, 2485.408072, 0.000000, X, Y) && !ellipse(29150.070000, 26396.438000, 2444.560070, 2444.560070, 0.000000, X, Y) && !ellipse(27305.042877, 26560.570007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27544.596000, 25271.134200, 835.456024, 835.456024, 0.000000, X, Y) && !ellipse(28925.599660, 24086.582600, 455.033613, 455.033613, 0.000000, X, Y) && !ellipse(29604.820000, 26038.028000, 754.613622, 754.613622, 0.000000, X, Y) && !ellipse(28765.480000, 25134.503400, 1325.616038, 1325.616038, 0.000000, X, Y) && !ellipse(26778.088593, 25874.632568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27567.588104, 26050.645081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28957.612000, 27863.276000, 1066.304031, 1066.304031, 0.000000, X, Y) && !ellipse(30647.860168, 26307.487305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30201.263000, 25716.873383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31051.620000, 27293.215800, 1359.416039, 1359.416039, 0.000000, X, Y) && !ellipse(29170.947021, 24925.990601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30343.819489, 25097.778961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31677.890000, 26075.678800, 1425.920041, 1425.920041, 0.000000, X, Y) && !ellipse(31090.695160, 26301.301086, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 19 18:47:17 2012] Writing fullrun_mos2_xmm0136740101_pi300-10000_pass1_cl_src44.gif
[Tue Jun 19 19:05:32 2012] Mean detx,y = (-2001.75, -3344.68) 
[Tue Jun 19 19:05:34 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 19 19:05:45 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 19 19:05:45 2012] Setting source spectrum file to fullrun_mos2_xmm0136740101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Tue Jun 19 19:05:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0136740101_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Tue Jun 19 22:56:30 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 19 22:56:30 2012] rmf not generated due to insufficient counts
[Tue Jun 19 23:00:46 2012] Updating aperture counts using extracted products
[Tue Jun 19 23:00:46 2012] Error reading totcts from fullrun_mos2_xmm0136740101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Tue Jun 19 23:00:46 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 23:00:46 2012] Using photon index=1.80, rate=0.00815, arf fullrun_mos2_xmm0136740101_pi300-10000_pass1_cl_src44.arf
[Tue Jun 19 23:00:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 23:00:46 2012] Updating source flux to 8.2e-14
[Tue Jun 19 23:02:49 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting