[Sun Jun 17 10:17:14 2012] Detection parameters:
  Position = (333.5, 295.1) = 9 9 18.06 -9 42 3.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 176.2 +/- 24.4
  Background counts = 116.1
  Rate = 0.01 +/- 0.002

[Sun Jun 17 10:17:14 2012] Off-axis axis estimate = 2.55'
[Sun Jun 17 17:26:05 2012] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 17:26:05 2012] Initial guess for spatial extent in simple fitting = 7.71"
[Sun Jun 17 17:26:05 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.969
[Sun Jun 17 17:26:05 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 7.71"
[Sun Jun 17 19:42:31 2012] fullrun_mos2_xmm0136740101_pi300-10000_cl_pass0_src24.ximg exists
[Sun Jun 17 19:42:31 2012] fullrun_mos2_xmm0136740101_pi300-10000_cl_pass0_src24_1.ximg exists
[Sun Jun 17 19:42:31 2012] Fit fullrun_mos2_xmm0136740101_pi300-10000_cl_pass0_src24 appears to have run properly
[Sun Jun 17 19:42:32 2012] fullrun_mos2_xmm0136740101_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Sun Jun 17 19:42:32 2012] fullrun_mos2_xmm0136740101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Sun Jun 17 19:42:32 2012] Fit fullrun_mos2_xmm0136740101_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Sun Jun 17 19:43:12 2012] Source 41 is offset by 1.985725 and 4.068217 pixels which is larger than
2 X fitted extent = 0.885871 x 0.885871, not incorporating fit results
[Sun Jun 17 19:43:12 2012] Spatial fit model total counts = 1877.850000, observed total counts = 1877.000000
[Sun Jun 17 19:43:12 2012] Offset between fit and detection position for source 41 = 5.473688 pixels
[Sun Jun 17 19:43:12 2012] Warning, changing simple spatial fit ID from 24 to 38
[Sun Jun 17 19:43:12 2012] 1902.523000 total counts/ 1757.840000 bgd. counts: snr = 3.450864
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 5.473688 pixels
  Position = (330.2, 290.7) = 9 9 19.02 -9 42 23.0
  Extent = 15.7 (15.7-31.4)", rotation angle = 0
  Source counts = 144.7 +/- 43.6
  Background counts = 1757.8
  Rate = 0.01 +/- 0.003
[Sun Jun 17 19:43:12 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 19:43:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 19:43:12 2012] Assessing source extent using major axis lower bound
[Sun Jun 17 19:43:12 2012] Source does appear to be extended
[Sun Jun 17 19:43:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 19:43:12 2012] Source is confused with source 49
[Sun Jun 17 19:43:12 2012] Source is confused with source 44
[Sun Jun 17 23:53:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 17 23:53:06 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 17 23:53:06 2012] Initial guess for spatial extent in simple fitting = 15.69"
[Sun Jun 17 23:53:06 2012] source mask rpix=3.6, npix_max = 67, mask sum = 63, frac = 0.934
[Sun Jun 17 23:53:06 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 15.69"
[Mon Jun 18 01:35:31 2012] fullrun_mos2_xmm0136740101_pi300-10000_cl_pass1_src19.ximg exists
[Mon Jun 18 01:35:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136740101_pi300-10000_cl_pass1_src19.csv
[Mon Jun 18 01:35:31 2012] fullrun_mos2_xmm0136740101_pi300-10000_cl_pass1_src19_1.ximg exists
[Mon Jun 18 01:35:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136740101_pi300-10000_cl_pass1_src19.csv
[Mon Jun 18 01:35:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136740101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136740101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 01:35:32 2012] fullrun_mos2_xmm0136740101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Mon Jun 18 01:35:32 2012] fullrun_mos2_xmm0136740101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Mon Jun 18 01:35:32 2012] Fit fullrun_mos2_xmm0136740101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Mon Jun 18 01:36:00 2012] Source 41 is offset by 3.631471 and -6.778644 pixels which is larger than
2 X fitted extent = 1.581789 x 1.581789, not incorporating fit results
[Mon Jun 18 01:36:00 2012] Spatial fit model total counts = 3824.910000, observed total counts = 3626.000000
[Mon Jun 18 01:36:00 2012] Offset between fit and detection position for source 41 = 1.581460 pixels
[Mon Jun 18 01:36:00 2012] 3852.932000 total counts/ 3708.230000 bgd. counts: snr = 2.376245
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 1.581460 pixels
  Position = (331.2, 289.5) = 9 9 18.74 -9 42 28.4
  Extent = 16.6 (5.8-31.4)", rotation angle = 0
  Source counts = 144.7 +/- 62.1
  Background counts = 3708.2
  Rate = 0.01 +/- 0.004
[Mon Jun 18 01:36:00 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 01:36:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 01:36:00 2012] Assessing source extent using major axis lower bound
[Mon Jun 18 01:36:00 2012] Source does appear to be extended
[Mon Jun 18 01:36:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 18:47:17 2012] XMMSAS src. selection expression = ellipse(28765.480000, 25134.503400, 994.212029, 994.212029, 0.000000, X, Y)
[Tue Jun 19 18:47:17 2012] Writing source region out to fullrun_mos2_xmm0136740101_pi300-10000_pass1_cl_src41_src.reg
[Tue Jun 19 18:47:17 2012] Extracting stamp from image fullrun_mos2_xmm0136740101_pi300-10000_cl_sm2.00.img.gz, (274, 232) - (388, 347)
[Tue Jun 19 18:47:17 2012] XMMSAS bgd. selection expression = annulus(28765.480000, 25134.503400, 1657.020048, 3314.040095, X, Y) && !ellipse(28727.901800, 26806.674000, 1222.280035, 1222.280035, 0.000000, X, Y) && !ellipse(30232.693620, 24370.468200, 334.213610, 334.213610, 0.000000, X, Y) && !ellipse(27126.810760, 28758.780273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26858.549255, 27611.998779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27974.465400, 26723.552400, 1182.272034, 1182.272034, 0.000000, X, Y) && !ellipse(27588.804443, 28048.251953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27007.881378, 27085.878174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28115.816000, 28178.068000, 2485.408072, 2485.408072, 0.000000, X, Y) && !ellipse(29150.070000, 26396.438000, 2444.560070, 2444.560070, 0.000000, X, Y) && !ellipse(27305.042877, 26560.570007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27544.596000, 25271.134200, 835.456024, 835.456024, 0.000000, X, Y) && !ellipse(28925.599660, 24086.582600, 455.033613, 455.033613, 0.000000, X, Y) && !ellipse(26138.725677, 28322.667816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25733.364000, 27317.731200, 1130.040033, 1130.040033, 0.000000, X, Y) && !ellipse(26344.817017, 28738.912689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29604.820000, 26038.028000, 754.613622, 754.613622, 0.000000, X, Y) && !ellipse(26778.088593, 25874.632568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27567.588104, 26050.645081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28957.612000, 27863.276000, 1066.304031, 1066.304031, 0.000000, X, Y) && !ellipse(30647.860168, 26307.487305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30201.263000, 25716.873383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26410.475891, 26653.493378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25798.215515, 29189.290619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31051.620000, 27293.215800, 1359.416039, 1359.416039, 0.000000, X, Y) && !ellipse(25736.233856, 28494.031372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29170.947021, 24925.990601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29528.600708, 25371.520447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30343.819489, 25097.778961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31677.890000, 26075.678800, 1425.920041, 1425.920041, 0.000000, X, Y) && !ellipse(31090.695160, 26301.301086, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 19 18:47:17 2012] Writing fullrun_mos2_xmm0136740101_pi300-10000_pass1_cl_src41.gif
[Tue Jun 19 19:01:59 2012] Mean detx,y = (-1295.08, -3255.17) 
[Tue Jun 19 19:02:00 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 19 19:02:10 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 19 19:02:10 2012] Setting source spectrum file to fullrun_mos2_xmm0136740101_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Tue Jun 19 19:02:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0136740101_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Tue Jun 19 23:00:46 2012] Updating aperture counts using extracted products
[Tue Jun 19 23:00:46 2012] Error reading totcts from fullrun_mos2_xmm0136740101_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Tue Jun 19 23:00:46 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 23:00:46 2012] Using photon index=1.80, rate=0.01, arf fullrun_mos2_xmm0136740101_pi300-10000_pass1_cl_src41.arf
[Tue Jun 19 23:00:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 23:00:46 2012] Updating source flux to 9.5e-14
[Tue Jun 19 23:02:49 2012] Flag b found in src. 41 procflags, skipping spectral fitting
[Tue Jun 19 23:02:49 2012] Flag c found in src. 41 procflags, skipping spectral fitting