[Sun Jun 17 10:17:14 2012] Detection parameters:
  Position = (324.1, 305.1) = 9 9 20.83 -9 41 21.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 281.9 +/- 27.2
  Background counts = 111.5
  Rate = 0.02 +/- 0.002

[Sun Jun 17 10:17:14 2012] Off-axis axis estimate = 1.92'
[Sun Jun 17 17:26:05 2012] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 17:26:05 2012] Initial guess for spatial extent in simple fitting = 7.39"
[Sun Jun 17 17:26:05 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.827
[Sun Jun 17 17:26:05 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.39"
[Sun Jun 17 19:42:30 2012] fullrun_mos2_xmm0136740101_pi300-10000_cl_pass0_src6.ximg exists
[Sun Jun 17 19:42:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136740101_pi300-10000_cl_pass0_src6.csv
[Sun Jun 17 19:42:30 2012] fullrun_mos2_xmm0136740101_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun Jun 17 19:42:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136740101_pi300-10000_cl_pass0_src6.csv
[Sun Jun 17 19:42:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136740101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136740101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 19:42:31 2012] fullrun_mos2_xmm0136740101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun Jun 17 19:42:31 2012] fullrun_mos2_xmm0136740101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Jun 17 19:42:31 2012] Fit fullrun_mos2_xmm0136740101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sun Jun 17 19:43:12 2012] Source 31 is offset by -0.825152 and 1.399417 pixels which is larger than
2 X fitted extent = 0.885862 x 0.885862, not incorporating fit results
[Sun Jun 17 19:43:12 2012] Spatial fit model total counts = 2777.040000, observed total counts = 2540.000000
[Sun Jun 17 19:43:12 2012] Offset between fit and detection position for source 31 = 3.297866 pixels
[Sun Jun 17 19:43:12 2012] 2754.024000 total counts/ 2554.090000 bgd. counts: snr = 3.956112
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 3.297866 pixels
  Position = (322.1, 307.7) = 9 9 21.42 -9 41 9.0
  Extent = 14.8 (14.8-29.6)", rotation angle = 0
  Source counts = 199.9 +/- 52.5
  Background counts = 2554.1
  Rate = 0.01 +/- 0.004
[Sun Jun 17 19:43:12 2012] Vigneting correction estimate = 1.000000
[Sun Jun 17 19:43:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 17 19:43:12 2012] Assessing source extent using major axis lower bound
[Sun Jun 17 19:43:12 2012] Source does appear to be extended
[Sun Jun 17 19:43:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 19:43:12 2012] Source is confused with source 28
[Sun Jun 17 23:53:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 17 23:53:06 2012] Initial guess for spatial extent in simple fitting = 14.78"
[Sun Jun 17 23:53:06 2012] source mask rpix=3.4, npix_max = 60, mask sum = 54, frac = 0.889
[Sun Jun 17 23:53:06 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 14.78"
[Mon Jun 18 01:35:31 2012] fullrun_mos2_xmm0136740101_pi300-10000_cl_pass1_src6.ximg exists
[Mon Jun 18 01:35:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136740101_pi300-10000_cl_pass1_src6.csv
[Mon Jun 18 01:35:31 2012] fullrun_mos2_xmm0136740101_pi300-10000_cl_pass1_src6_1.ximg exists
[Mon Jun 18 01:35:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136740101_pi300-10000_cl_pass1_src6.csv
[Mon Jun 18 01:35:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136740101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136740101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 01:35:32 2012] fullrun_mos2_xmm0136740101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Mon Jun 18 01:35:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136740101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon Jun 18 01:35:32 2012] fullrun_mos2_xmm0136740101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Mon Jun 18 01:35:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136740101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Mon Jun 18 01:35:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136740101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136740101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 01:36:00 2012] Spatial fit model total counts = 4671.270000, observed total counts = 4218.000000
[Mon Jun 18 01:36:00 2012] Poor agreement between spatial fit and data for source 31
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 18 01:36:00 2012] Source 31 is offset by -2.272972 and -4.299834 pixels which is larger than
2 X fitted extent = 0.878074 x 0.878074, not incorporating fit results
[Mon Jun 18 01:36:00 2012] Source 31 is offset by -1.499892 and 2.190782 pixels which is larger than
2 X fitted extent = 1.581789 x 1.581789, not incorporating fit results
[Mon Jun 18 01:36:00 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 01:36:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 01:36:00 2012] Assessing source extent using major axis lower bound
[Mon Jun 18 01:36:00 2012] Source does appear to be extended
[Mon Jun 18 01:36:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 19 18:47:16 2012] XMMSAS src. selection expression = ellipse(27974.465400, 26723.552400, 886.704026, 886.704026, 0.000000, X, Y)
[Tue Jun 19 18:47:16 2012] Writing source region out to fullrun_mos2_xmm0136740101_pi300-10000_pass1_cl_src31_src.reg
[Tue Jun 19 18:47:16 2012] Extracting stamp from image fullrun_mos2_xmm0136740101_pi300-10000_cl_sm2.00.img.gz, (271, 257) - (373, 359)
[Tue Jun 19 18:47:16 2012] XMMSAS bgd. selection expression = annulus(27974.465400, 26723.552400, 1477.840043, 2955.680085, X, Y) && !ellipse(28727.901800, 26806.674000, 1222.280035, 1222.280035, 0.000000, X, Y) && !ellipse(30232.693620, 24370.468200, 334.213610, 334.213610, 0.000000, X, Y) && !ellipse(27126.810760, 28758.780273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26858.549255, 27611.998779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27588.804443, 28048.251953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27007.881378, 27085.878174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28115.816000, 28178.068000, 2485.408072, 2485.408072, 0.000000, X, Y) && !ellipse(29150.070000, 26396.438000, 2444.560070, 2444.560070, 0.000000, X, Y) && !ellipse(27305.042877, 26560.570007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27544.596000, 25271.134200, 835.456024, 835.456024, 0.000000, X, Y) && !ellipse(28925.599660, 24086.582600, 455.033613, 455.033613, 0.000000, X, Y) && !ellipse(26138.725677, 28322.667816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25733.364000, 27317.731200, 1130.040033, 1130.040033, 0.000000, X, Y) && !ellipse(26344.817017, 28738.912689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29604.820000, 26038.028000, 754.613622, 754.613622, 0.000000, X, Y) && !ellipse(28765.480000, 25134.503400, 1325.616038, 1325.616038, 0.000000, X, Y) && !ellipse(26778.088593, 25874.632568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27567.588104, 26050.645081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28957.612000, 27863.276000, 1066.304031, 1066.304031, 0.000000, X, Y) && !ellipse(30647.860168, 26307.487305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30201.263000, 25716.873383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26410.475891, 26653.493378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27425.424561, 29352.168701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25798.215515, 29189.290619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31051.620000, 27293.215800, 1359.416039, 1359.416039, 0.000000, X, Y) && !ellipse(25736.233856, 28494.031372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29170.947021, 24925.990601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29528.600708, 25371.520447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30343.819489, 25097.778961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31677.890000, 26075.678800, 1425.920041, 1425.920041, 0.000000, X, Y) && !ellipse(31090.695160, 26301.301086, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 19 18:47:16 2012] Writing fullrun_mos2_xmm0136740101_pi300-10000_pass1_cl_src31.gif
[Tue Jun 19 18:48:11 2012] Mean detx,y = (-1088.91, -1605.02) 
[Tue Jun 19 18:48:12 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 19 18:48:17 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 19 18:48:17 2012] Setting source spectrum file to fullrun_mos2_xmm0136740101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Tue Jun 19 18:48:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0136740101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Tue Jun 19 23:00:45 2012] Updating aperture counts using extracted products
[Tue Jun 19 23:00:45 2012] Error reading totcts from fullrun_mos2_xmm0136740101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Tue Jun 19 23:00:46 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 19 23:00:46 2012] Using photon index=1.80, rate=0.0139, arf fullrun_mos2_xmm0136740101_pi300-10000_pass1_cl_src31.arf
[Tue Jun 19 23:00:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 19 23:00:46 2012] Updating source flux to 1.3e-13
[Tue Jun 19 23:02:49 2012] Flag b found in src. 31 procflags, skipping spectral fitting
[Tue Jun 19 23:02:49 2012] Flag p found in src. 31 procflags, skipping spectral fitting
[Tue Jun 19 23:02:49 2012] Flag c found in src. 31 procflags, skipping spectral fitting