[Sun Jun 17 10:16:39 2012] Detection parameters:
  Position = (300.8, 302.2) = 9 9 27.67 -9 41 32.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.2 +/- 18.6
  Background counts = 77.1
  Rate = 0.007 +/- 0.001

[Sun Jun 17 10:16:39 2012] Off-axis axis estimate = 0.32'
[Sun Jun 17 13:59:13 2012] Using EEF radius (= 6.59 ")to estimate initial spatial extent for simple fitting
[Sun Jun 17 13:59:13 2012] Initial guess for spatial extent in simple fitting = 6.59"
[Sun Jun 17 13:59:13 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.985
[Sun Jun 17 13:59:13 2012] Giving source the simple spatial ID 46 for pass 0, mean size = 6.59"
[Sun Jun 17 17:26:02 2012] fullrun_mos1_xmm0136740101_pi300-10000_cl_pass0_src46.ximg exists
[Sun Jun 17 17:26:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136740101_pi300-10000_cl_pass0_src46.csv
[Sun Jun 17 17:26:02 2012] fullrun_mos1_xmm0136740101_pi300-10000_cl_pass0_src46_1.ximg exists
[Sun Jun 17 17:26:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136740101_pi300-10000_cl_pass0_src46.csv
[Sun Jun 17 17:26:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136740101_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136740101_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 17:26:04 2012] fullrun_mos1_xmm0136740101_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Sun Jun 17 17:26:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136740101_pi300-10000_cl_pass0_tfrozen_src46.csv
[Sun Jun 17 17:26:04 2012] fullrun_mos1_xmm0136740101_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Sun Jun 17 17:26:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136740101_pi300-10000_cl_pass0_tfrozen_src46.csv
[Sun Jun 17 17:26:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136740101_pi300-10000_cl_pass0_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136740101_pi300-10000_cl_pass0_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 17 19:43:02 2012] Spatial fit model total counts = 1804.110000, observed total counts = 1803.000000
[Sun Jun 17 19:43:02 2012] Offset between fit and detection position for source 52 = 0.929549 pixels
[Sun Jun 17 19:43:02 2012] Warning, changing simple spatial fit ID from 46 to 34
[Sun Jun 17 19:43:02 2012] 1854.918100 total counts/ 1832.280000 bgd. counts: snr = 0.528864
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 0.929549 pixels
  Position = (301.8, 302.0) = 9 9 27.40 -9 41 33.9
  Extent = 4.6 (1.7-13.6)", rotation angle = 0
  Source counts = 22.6 +/- 43.1
  Background counts = 1832.3
  Rate = 0.002 +/- 0.003
  Deleting source due to low Poisson probability