[Fri Jun 22 16:48:05 2012] Detection parameters:
  Position = (315.7, 322.2) = 12 29 3.49 2 3 17.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1287.7 +/- 58.3
  Background counts = 59.3
  Rate = 0.03 +/- 0.001

[Fri Jun 22 16:48:06 2012] Off-axis axis estimate = 2.13'
[Fri Jun 22 19:19:00 2012] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 19:19:00 2012] Initial guess for spatial extent in simple fitting = 7.49"
[Fri Jun 22 19:19:00 2012] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.658
[Fri Jun 22 19:19:00 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.49"
[Fri Jun 22 20:49:53 2012] fullrun_mos2_xmm0136550801_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jun 22 20:49:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136550801_pi300-10000_cl_pass0_src3.csv
[Fri Jun 22 20:49:53 2012] fullrun_mos2_xmm0136550801_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jun 22 20:49:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136550801_pi300-10000_cl_pass0_src3.csv
[Fri Jun 22 20:49:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136550801_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136550801_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 20:49:53 2012] fullrun_mos2_xmm0136550801_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jun 22 20:49:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136550801_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jun 22 20:49:53 2012] fullrun_mos2_xmm0136550801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jun 22 20:49:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136550801_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jun 22 20:49:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136550801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136550801_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 20:50:02 2012] Warning, spatial fit 3 centroid is now closest to src. 2
[Fri Jun 22 20:50:02 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 20:50:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 20:50:02 2012] Assessing source extent using major
[Fri Jun 22 20:50:02 2012] Source does appear to be extended
[Fri Jun 22 20:50:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 20:50:02 2012] Source is confused with source 2
[Fri Jun 22 23:12:18 2012] Using EEF radius (= 7.49 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 23:12:18 2012] Initial guess for spatial extent in simple fitting = 7.49"
[Fri Jun 22 23:12:18 2012] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.658
[Fri Jun 22 23:12:18 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.49"
[Sat Jun 23 00:05:44 2012] fullrun_mos2_xmm0136550801_pi300-10000_cl_pass1_src3.ximg exists
[Sat Jun 23 00:05:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136550801_pi300-10000_cl_pass1_src3.csv
[Sat Jun 23 00:05:44 2012] fullrun_mos2_xmm0136550801_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Jun 23 00:05:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136550801_pi300-10000_cl_pass1_src3.csv
[Sat Jun 23 00:05:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136550801_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136550801_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 00:05:44 2012] fullrun_mos2_xmm0136550801_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Jun 23 00:05:44 2012] fullrun_mos2_xmm0136550801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Jun 23 00:05:44 2012] Fit fullrun_mos2_xmm0136550801_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Jun 23 00:05:48 2012] Warning, spatial fit 3 centroid is now closest to src. 2
[Sat Jun 23 00:05:48 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 00:05:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 00:05:48 2012] Assessing source extent using major
[Sat Jun 23 00:05:48 2012] Source does appear to be extended
[Sat Jun 23 00:05:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 01:24:03 2012] Counts = 1287.748169, rescaling region sizes by 2.000000
[Sat Jun 23 01:24:03 2012] XMMSAS src. selection expression = ellipse(27413.455688, 27984.021484, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Jun 23 01:24:03 2012] Writing source region out to fullrun_mos2_xmm0136550801_pi300-10000_pass1_cl_src6_src.reg
[Sat Jun 23 01:24:03 2012] Extracting stamp from image fullrun_mos2_xmm0136550801_pi300-10000_cl_sm2.00.img.gz, (241, 247) - (391, 397)
[Sat Jun 23 01:24:03 2012] XMMSAS bgd. selection expression = annulus(27413.455688, 27984.021484, 4350.000000, 8700.000000, X, Y) && !ellipse(26414.337340, 27798.666600, 1643.863247, 1643.863247, 0.000000, X, Y) && !ellipse(27388.644440, 27614.422821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35279.855000, 20833.903200, 472.183214, 472.183214, 0.000000, X, Y) && !ellipse(18309.385452, 21811.152710, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 23 01:24:03 2012] Writing fullrun_mos2_xmm0136550801_pi300-10000_pass1_cl_src6.gif
[Sat Jun 23 01:32:10 2012] Mean detx,y = (-38.25, -95.10) 
[Sat Jun 23 01:32:14 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 01:35:03 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 01:35:03 2012] Setting source spectrum file to fullrun_mos2_xmm0136550801_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Jun 23 01:35:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0136550801_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat Jun 23 01:41:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 23 01:41:47 2012] rmf not generated due to insufficient counts
[Sat Jun 23 02:14:38 2012] Updating aperture counts using extracted products
[Sat Jun 23 02:14:38 2012] Error reading totcts from fullrun_mos2_xmm0136550801_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Jun 23 02:14:38 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 02:14:38 2012] Using photon index=1.80, rate=0.0312, arf fullrun_mos2_xmm0136550801_pi300-10000_pass1_cl_src6.arf
[Sat Jun 23 02:14:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 02:14:38 2012] Updating source flux to 4.4e-13
[Sat Jun 23 02:14:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting