[Thu Jul 26 09:00:02 2012] Detection parameters:
  Position = (257.1, 286.1) = 11 4 35.27 38 11 45.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 624.3 +/- 35.6
  Background counts = 69.7
  Rate = 0.06 +/- 0.003

[Thu Jul 26 09:00:03 2012] Off-axis axis estimate = 3.13'
[Thu Jul 26 10:32:52 2012] Using EEF radius (= 7.99 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 10:32:52 2012] Initial guess for spatial extent in simple fitting = 7.99"
[Thu Jul 26 10:32:52 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.732
[Thu Jul 26 10:32:52 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.99"
[Thu Jul 26 20:32:13 2012] fullrun_mos1_xmm0136541101_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jul 26 20:32:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136541101_pi300-10000_cl_pass0_src3.csv
[Thu Jul 26 20:32:13 2012] fullrun_mos1_xmm0136541101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jul 26 20:32:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136541101_pi300-10000_cl_pass0_src3.csv
[Thu Jul 26 20:32:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136541101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136541101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 20:32:14 2012] fullrun_mos1_xmm0136541101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jul 26 20:32:14 2012] fullrun_mos1_xmm0136541101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jul 26 20:32:14 2012] Fit fullrun_mos1_xmm0136541101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jul 27 04:14:22 2012] Source 2 is offset by -6.743614 and 5.653648 pixels which is larger than
2 X fitted extent = 1.037775 x 1.037775, not incorporating fit results
[Fri Jul 27 04:14:22 2012] Source 2 is offset by 2.799237 and 1.475232 pixels which is larger than
2 X fitted extent = 2.386961 x 2.386961, not incorporating fit results
[Fri Jul 27 04:14:22 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 04:14:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 04:14:22 2012] Assessing source extent using major
[Fri Jul 27 04:14:22 2012] Source does appear to be extended
[Fri Jul 27 04:14:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 05:53:19 2012] Using EEF radius (= 7.99 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 05:53:19 2012] Initial guess for spatial extent in simple fitting = 7.99"
[Fri Jul 27 05:53:19 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.732
[Fri Jul 27 05:53:19 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.99"
[Fri Jul 27 08:32:06 2012] fullrun_mos1_xmm0136541101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jul 27 08:32:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136541101_pi300-10000_cl_pass1_src3.csv
[Fri Jul 27 08:32:06 2012] fullrun_mos1_xmm0136541101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jul 27 08:32:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136541101_pi300-10000_cl_pass1_src3.csv
[Fri Jul 27 08:32:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136541101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136541101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 08:32:06 2012] fullrun_mos1_xmm0136541101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jul 27 08:32:06 2012] fullrun_mos1_xmm0136541101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jul 27 08:32:06 2012] Fit fullrun_mos1_xmm0136541101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jul 27 11:26:34 2012] Source 2 is offset by -5.802119 and -3.202490 pixels which is larger than
2 X fitted extent = 2.196451 x 2.196451, not incorporating fit results
[Fri Jul 27 11:26:34 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 11:26:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 11:26:34 2012] Assessing source extent using major
[Fri Jul 27 11:26:34 2012] Source does appear to be extended
[Fri Jul 27 11:26:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 10:01:39 2012] XMMSAS src. selection expression = ellipse(22317.737610, 24842.617371, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 28 10:01:39 2012] Writing source region out to fullrun_mos1_xmm0136541101_pi300-10000_pass1_cl_src2_src.reg
[Sat Jul 28 10:01:39 2012] Extracting stamp from image fullrun_mos1_xmm0136541101_pi300-10000_cl_sm2.00.img.gz, (220, 249) - (295, 324)
[Sat Jul 28 10:01:39 2012] XMMSAS bgd. selection expression = annulus(22317.737610, 24842.617371, 1087.500000, 2175.000000, X, Y) && !ellipse(24499.792120, 25850.860800, 3370.200097, 3370.200097, 0.000000, X, Y) && !ellipse(24020.977400, 25721.838000, 3471.360100, 2685.888077, 74.575000, X, Y) && !ellipse(22371.386000, 23646.658000, 1033.256030, 1033.256030, 0.000000, X, Y) && !ellipse(21062.564400, 23448.622200, 619.778418, 619.778418, 0.000000, X, Y) && !ellipse(19694.614000, 22459.099000, 1526.520044, 1526.520044, 0.000000, X, Y) && !ellipse(21567.656000, 22971.104000, 1333.728038, 1333.728038, 0.000000, X, Y) && !ellipse(19412.004517, 22242.010864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21674.560745, 23885.702332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21447.521225, 24482.144043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20289.864000, 25976.433600, 1371.824039, 1371.824039, 0.000000, X, Y) && !ellipse(26128.812000, 22978.202000, 2646.672076, 2646.672076, 0.000000, X, Y)
[Sat Jul 28 10:01:39 2012] Writing fullrun_mos1_xmm0136541101_pi300-10000_pass1_cl_src2.gif
[Sat Jul 28 10:31:44 2012] Mean detx,y = (-2636.30, 2040.84) 
[Sat Jul 28 10:31:47 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 10:32:08 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 10:32:09 2012] Setting source spectrum file to fullrun_mos1_xmm0136541101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jul 28 10:32:09 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0136541101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jul 28 12:22:34 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 28 12:22:34 2012] rmf not generated due to insufficient counts
[Sat Jul 28 15:50:58 2012] Updating aperture counts using extracted products
[Sat Jul 28 15:50:58 2012] Error reading totcts from fullrun_mos1_xmm0136541101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jul 28 15:50:59 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 15:50:59 2012] Using photon index=1.80, rate=0.0612, arf fullrun_mos1_xmm0136541101_pi300-10000_pass1_cl_src2.arf
[Sat Jul 28 15:50:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 15:50:59 2012] Updating source flux to 6.2e-13
[Sat Jul 28 15:51:04 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting