[Thu Jul 26 09:00:02 2012] Detection parameters:
  Position = (232.9, 330.8) = 11 4 44.21 38 14 57.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.0 +/- 12.3
  Background counts = 21.8
  Rate = 0.01 +/- 0.002

[Thu Jul 26 09:00:03 2012] Off-axis axis estimate = 5.30'
[Thu Jul 26 10:32:52 2012] Using EEF radius (= 9.08 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 10:32:52 2012] Initial guess for spatial extent in simple fitting = 9.08"
[Thu Jul 26 10:32:52 2012] source mask rpix=2.1, npix_max = 26, mask sum = 18, frac = 0.672
[Thu Jul 26 10:32:52 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 9.08"
[Thu Jul 26 20:32:13 2012] fullrun_mos1_xmm0136541101_pi300-10000_cl_pass0_src18.ximg exists
[Thu Jul 26 20:32:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136541101_pi300-10000_cl_pass0_src18.csv
[Thu Jul 26 20:32:13 2012] fullrun_mos1_xmm0136541101_pi300-10000_cl_pass0_src18_1.ximg exists
[Thu Jul 26 20:32:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136541101_pi300-10000_cl_pass0_src18.csv
[Thu Jul 26 20:32:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136541101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136541101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 20:32:14 2012] fullrun_mos1_xmm0136541101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Thu Jul 26 20:32:15 2012] fullrun_mos1_xmm0136541101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Thu Jul 26 20:32:15 2012] Fit fullrun_mos1_xmm0136541101_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Fri Jul 27 04:14:22 2012] Source 16 is offset by 8.249380 and -5.218098 pixels which is larger than
2 X fitted extent = 5.808844 x 5.808844, not incorporating fit results
[Fri Jul 27 04:14:22 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 04:14:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 04:14:22 2012] Assessing source extent using major
[Fri Jul 27 04:14:22 2012] Source does appear to be extended
[Fri Jul 27 04:14:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 05:53:19 2012] Using EEF radius (= 9.08 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 05:53:19 2012] Initial guess for spatial extent in simple fitting = 9.08"
[Fri Jul 27 05:53:19 2012] source mask rpix=2.1, npix_max = 26, mask sum = 18, frac = 0.672
[Fri Jul 27 05:53:19 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 9.08"
[Fri Jul 27 08:32:06 2012] fullrun_mos1_xmm0136541101_pi300-10000_cl_pass1_src16.ximg exists
[Fri Jul 27 08:32:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136541101_pi300-10000_cl_pass1_src16.csv
[Fri Jul 27 08:32:06 2012] fullrun_mos1_xmm0136541101_pi300-10000_cl_pass1_src16_1.ximg exists
[Fri Jul 27 08:32:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0136541101_pi300-10000_cl_pass1_src16.csv
[Fri Jul 27 08:32:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0136541101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0136541101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 08:32:07 2012] fullrun_mos1_xmm0136541101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Fri Jul 27 08:32:07 2012] fullrun_mos1_xmm0136541101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Fri Jul 27 08:32:07 2012] Fit fullrun_mos1_xmm0136541101_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Fri Jul 27 11:26:34 2012] Spatial fit model total counts = 411.496000, observed total counts = 394.000000
[Fri Jul 27 11:26:34 2012] Offset between fit and detection position for source 16 = 2.819659 pixels
[Fri Jul 27 11:26:34 2012] 414.806000 total counts/ 232.989000 bgd. counts: snr = 11.911509
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 2.819659 pixels
  Position = (234.1, 328.2) = 11 4 43.77 38 14 47.4
  Extent = 12.8 (9.5-16.8)", rotation angle = 0
  Source counts = 181.8 +/- 20.4
  Background counts = 233.0
  Rate = 0.02 +/- 0.002
[Fri Jul 27 11:26:35 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 11:26:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 11:26:35 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 11:26:35 2012] Source does appear to be extended
[Fri Jul 27 11:26:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 10:01:40 2012] XMMSAS src. selection expression = ellipse(20318.407000, 28507.330000, 770.691643, 770.691643, 0.000000, X, Y)
[Sat Jul 28 10:01:40 2012] Writing source region out to fullrun_mos1_xmm0136541101_pi300-10000_pass1_cl_src16_src.reg
[Sat Jul 28 10:01:40 2012] Extracting stamp from image fullrun_mos1_xmm0136541101_pi300-10000_cl_sm2.00.img.gz, (190, 284) - (278, 373)
[Sat Jul 28 10:01:40 2012] XMMSAS bgd. selection expression = annulus(20318.407000, 28507.330000, 1284.486071, 2568.972143, X, Y) && !ellipse(24499.792120, 25850.860800, 3370.200097, 3370.200097, 0.000000, X, Y) && !ellipse(24020.977400, 25721.838000, 3471.360100, 2685.888077, 74.575000, X, Y) && !ellipse(20289.864000, 25976.433600, 1371.824039, 1371.824039, 0.000000, X, Y)
[Sat Jul 28 10:01:40 2012] Writing fullrun_mos1_xmm0136541101_pi300-10000_pass1_cl_src16.gif
[Sat Jul 28 10:55:04 2012] Mean detx,y = (-6747.02, 1591.09) 
[Sat Jul 28 10:55:06 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 10:55:44 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 10:55:44 2012] Setting source spectrum file to fullrun_mos1_xmm0136541101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sat Jul 28 10:55:44 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0136541101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sat Jul 28 15:50:58 2012] Updating aperture counts using extracted products
[Sat Jul 28 15:50:58 2012] Error reading totcts from fullrun_mos1_xmm0136541101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sat Jul 28 15:51:00 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 15:51:00 2012] Using photon index=1.80, rate=0.0163, arf fullrun_mos1_xmm0136541101_pi300-10000_pass1_cl_src16.arf
[Sat Jul 28 15:51:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 15:51:00 2012] Updating source flux to 2.4e-13
[Sat Jul 28 15:51:04 2012] Flag b found in src. 16 procflags, skipping spectral fitting