[Tue Jul 10 22:00:53 2012] Detection parameters:
  Position = (280.2, 296.9) = 11 4 26.99 38 12 34.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 380460.6 +/- 741.0
  Background counts = 85.4
  Rate = 7e+01 +/- 0.1

[Tue Jul 10 22:00:54 2012] Off-axis axis estimate = 1.33'
[Tue Jul 10 22:05:07 2012] Using EEF radius (= 7.09 ")to estimate initial spatial extent for simple fitting
[Tue Jul 10 22:05:07 2012] Initial guess for spatial extent in simple fitting = 7.09"
[Tue Jul 10 22:05:07 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.881
[Tue Jul 10 22:05:07 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.09"
[Wed Jul 11 01:21:39 2012] fullrun_pn_xmm0136540801_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jul 11 01:21:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540801_pi300-10000_cl_pass0_src1.csv
[Wed Jul 11 01:21:39 2012] fullrun_pn_xmm0136540801_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jul 11 01:21:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540801_pi300-10000_cl_pass0_src1.csv
[Wed Jul 11 01:21:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136540801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136540801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 01:21:40 2012] fullrun_pn_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jul 11 01:21:40 2012] fullrun_pn_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jul 11 01:21:40 2012] Fit fullrun_pn_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jul 11 09:14:19 2012] Spatial fit model total counts = 654869.000000, observed total counts = 660066.000000
[Wed Jul 11 09:14:19 2012] Offset between fit and detection position for source 1 = 0.653696 pixels
[Wed Jul 11 09:14:19 2012] 654914.000000 total counts/ 25600.000000 bgd. counts: snr = 3933.212500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.653696 pixels
  Position = (279.8, 296.3) = 11 4 27.11 38 12 31.5
  Extent = 14.2 (14.2-28.4)", rotation angle = 0
  Source counts = 629314.0 +/- 809.3
  Background counts = 25600.0
  Rate = 7e+01 +/- 0.09
[Wed Jul 11 09:14:19 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 09:14:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 09:14:19 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 09:14:19 2012] Source does appear to be extended
[Wed Jul 11 09:14:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 09:14:53 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 11 09:14:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 11 09:14:53 2012] Initial guess for spatial extent in simple fitting = 14.19"
[Wed Jul 11 09:14:53 2012] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.990
[Wed Jul 11 09:14:53 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.19"
[Wed Jul 11 12:09:19 2012] fullrun_pn_xmm0136540801_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jul 11 12:09:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540801_pi300-10000_cl_pass1_src1.csv
[Wed Jul 11 12:09:19 2012] fullrun_pn_xmm0136540801_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jul 11 12:09:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0136540801_pi300-10000_cl_pass1_src1.csv
[Wed Jul 11 12:09:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0136540801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0136540801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 12:09:19 2012] fullrun_pn_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jul 11 12:09:19 2012] fullrun_pn_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jul 11 12:09:19 2012] Fit fullrun_pn_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jul 11 23:21:11 2012] Spatial fit model total counts = 769360.000000, observed total counts = 793530.000000
[Wed Jul 11 23:21:11 2012] Offset between fit and detection position for source 1 = 0.033065 pixels
[Wed Jul 11 23:21:11 2012] 768283.000000 total counts/ 67600.000000 bgd. counts: snr = 2694.934615
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.033065 pixels
  Position = (279.8, 296.4) = 11 4 27.12 38 12 31.7
  Extent = 16.4 (16.4-16.4)", rotation angle = 0
  Source counts = 700683.0 +/- 876.5
  Background counts = 67600.0
  Rate = 7e+01 +/- 0.09
[Wed Jul 11 23:21:11 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 23:21:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 23:21:11 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 23:21:11 2012] Source does appear to be extended
[Wed Jul 11 23:21:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 23:21:41 2012] Counts = 700683.000000, rescaling region sizes by 3.000000
[Wed Jul 11 23:21:41 2012] XMMSAS src. selection expression = ellipse(24296.941000, 25735.195800, 2955.582085, 2955.582085, 0.000000, X, Y)
[Wed Jul 11 23:21:41 2012] Writing source region out to fullrun_pn_xmm0136540801_pi300-10000_pass1_cl_src1_src.reg
[Wed Jul 11 23:21:41 2012] Extracting stamp from image fullrun_pn_xmm0136540801_pi300-10000_cl_sm2.00.img.gz, (110, 127) - (450, 466)
[Wed Jul 11 23:21:41 2012] XMMSAS bgd. selection expression = annulus(24296.941000, 25735.195800, 14777.910425, 29555.820850, X, Y) && !ellipse(20142.092000, 27995.234000, 1375.736040, 1375.736040, 0.000000, X, Y) && !ellipse(22003.078000, 28707.868000, 1373.768040, 1373.768040, 0.000000, X, Y) && !ellipse(27626.821808, 26235.796204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22020.254852, 22968.896820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27212.862000, 23088.306000, 1272.328037, 1272.328037, 0.000000, X, Y) && !ellipse(21783.396000, 29059.826000, 1331.320038, 1331.320038, 0.000000, X, Y) && !ellipse(27413.299042, 27251.124542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26898.101227, 27116.485352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27267.229950, 26676.313354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27982.378021, 25725.220795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21736.872000, 22611.402000, 761.700822, 761.700822, 0.000000, X, Y) && !ellipse(27460.718400, 22447.901000, 1299.184037, 1299.184037, 0.000000, X, Y) && !ellipse(27619.416931, 22231.196930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26977.346000, 21058.500000, 1286.000037, 1286.000037, 21.958000, X, Y) && !ellipse(25897.755219, 22054.111786, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22889.803497, 21519.899979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24585.483093, 21267.389435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24872.340000, 17573.762000, 1609.080046, 1609.080046, 0.000000, X, Y) && !ellipse(24721.079200, 18781.076000, 1540.288044, 1540.288044, 0.000000, X, Y)
[Wed Jul 11 23:21:41 2012] Writing fullrun_pn_xmm0136540801_pi300-10000_pass1_cl_src1.gif
[Wed Jul 11 23:22:33 2012] Mean detx,y = (383.60, 2265.06) 
[Wed Jul 11 23:22:39 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 11 23:27:38 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 11 23:27:38 2012] Setting source spectrum file to fullrun_pn_xmm0136540801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jul 11 23:27:38 2012] Setting bgd. spectrum file to fullrun_pn_xmm0136540801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jul 12 21:16:03 2012] Updating aperture counts using extracted products
[Thu Jul 12 21:16:03 2012] Error reading totcts from fullrun_pn_xmm0136540801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul 12 21:16:04 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 21:16:04 2012] Using photon index=1.80, rate=74, arf fullrun_pn_xmm0136540801_pi300-10000_pass1_cl_src1.arf
[Thu Jul 12 21:16:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 21:16:05 2012] Updating source flux to 2.2e-10
[Thu Jul 12 21:26:29 2012] Reading fit data from xmm0136540801/analysis//spectral/fullrun_pn_xmm0136540801_pi300-10000_pass1_cl_src1_pl.csv
[Thu Jul 12 21:26:29 2012] Spectral fit parameter nH value = 1.46482e+20
[Thu Jul 12 21:26:29 2012] Spectral fit parameter PhoIndex value = 2.0231
[Thu Jul 12 21:26:29 2012] Failed to get F(0.3-8.0) from xmm0136540801/analysis//spectral/fullrun_pn_xmm0136540801_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jul 12 21:26:29 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 21:26:29 2012] Using Nh = 1.5e+20, photon index=2.02, rate=74, arf fullrun_pn_xmm0136540801_pi300-10000_pass1_cl_src1.arf
[Thu Jul 12 21:26:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 21:26:29 2012] Updating source flux to 2e-10