[Tue Jul 10 22:01:45 2012] Detection parameters:
  Position = (331.1, 226.2) = 11 4 8.19 38 7 26.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 391.2 +/- 25.0
  Background counts = 27.2
  Rate = 0.05 +/- 0.003

[Tue Jul 10 22:01:46 2012] Off-axis axis estimate = 5.75'
[Wed Jul 11 04:11:33 2012] Using EEF radius (= 9.30 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 04:11:33 2012] Initial guess for spatial extent in simple fitting = 9.30"
[Wed Jul 11 04:11:33 2012] source mask rpix=2.1, npix_max = 27, mask sum = 23, frac = 0.826
[Wed Jul 11 04:11:33 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 9.30"
[Wed Jul 11 09:14:07 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src7.ximg exists
[Wed Jul 11 09:14:07 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src7.csv
[Wed Jul 11 09:14:07 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed Jul 11 09:14:07 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src7.csv
[Wed Jul 11 09:14:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 09:14:08 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed Jul 11 09:14:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src7.csv
[Wed Jul 11 09:14:08 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Jul 11 09:14:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src7.csv
[Wed Jul 11 09:14:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 09:14:39 2012] Warning, spatial fit 7 centroid is now closest to src. 54
[Wed Jul 11 09:14:39 2012] Spatial fit model total counts = 1731.430000, observed total counts = 1250.000000
[Wed Jul 11 09:14:39 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 11 09:14:39 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 09:14:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 09:14:39 2012] Assessing source extent using major
[Wed Jul 11 09:14:39 2012] Source does appear to be extended
[Wed Jul 11 09:14:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 09:14:39 2012] Source is confused with source 54
[Wed Jul 11 09:14:39 2012] Source is confused with source 68
[Wed Jul 11 17:23:43 2012] Using EEF radius (= 9.30 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 17:23:43 2012] Initial guess for spatial extent in simple fitting = 9.30"
[Wed Jul 11 17:23:43 2012] source mask rpix=2.1, npix_max = 27, mask sum = 23, frac = 0.826
[Wed Jul 11 17:23:43 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 9.30"
[Wed Jul 11 23:21:00 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src6.ximg exists
[Wed Jul 11 23:21:00 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src6_1.ximg exists
[Wed Jul 11 23:21:00 2012] Fit fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src6 appears to have run properly
[Wed Jul 11 23:21:01 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Wed Jul 11 23:21:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src6.csv
[Wed Jul 11 23:21:01 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Jul 11 23:21:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src6.csv
[Wed Jul 11 23:21:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 23:21:30 2012] Spatial fit model total counts = 1396.480000, observed total counts = 1271.000000
[Wed Jul 11 23:21:30 2012] Offset between fit and detection position for source 7 = 1.885449 pixels
[Wed Jul 11 23:21:30 2012] 1407.215000 total counts/ 758.074000 bgd. counts: snr = 23.576712
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 1.885449 pixels
  Position = (332.2, 224.7) = 11 4 7.79 38 7 19.7
  Extent = 18.6 (18.5-37.2)" x 4.5 (3.9-5.3)", rotation angle = 53 (52-55) degrees
  Source counts = 649.1 +/- 37.5
  Background counts = 758.1
  Rate = 0.06 +/- 0.003
[Wed Jul 11 23:21:30 2012] Spatial fit model total counts = 1413.820000, observed total counts = 1250.000000
[Wed Jul 11 23:21:30 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 11 23:21:30 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 23:21:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 23:21:30 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 23:21:30 2012] Source does appear to be extended
[Wed Jul 11 23:21:30 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.48
[Wed Jul 11 23:21:30 2012] Source is asymmetric
[Thu Jul 12 15:41:47 2012] XMMSAS src. selection expression = ellipse(28857.175800, 19496.322000, 1116.456032, 271.315808, 53.419000, X, Y)
[Thu Jul 12 15:41:47 2012] Writing source region out to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src7_src.reg
[Thu Jul 12 15:41:47 2012] Extracting stamp from image fullrun_mos2_xmm0136540801_pi300-10000_cl_sm2.00.img.gz, (268, 160) - (396, 289)
[Thu Jul 12 15:41:47 2012] XMMSAS bgd. selection expression = annulus(28857.175800, 19496.322000, 1860.760054, 3721.520107, X, Y) && !ellipse(24502.476257, 25532.837372, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24267.460000, 25175.864800, 3500.136101, 3500.136101, 0.000000, X, Y) && !ellipse(25467.839600, 23157.796844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29351.130585, 18874.744736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29022.658325, 19280.447815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27856.449982, 20832.524841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28262.621674, 20201.687225, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(27334.765930, 21539.417099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26134.942261, 23196.785950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26577.386000, 22622.738000, 612.219218, 612.219218, 0.000000, X, Y) && !ellipse(30560.765600, 17213.490200, 1700.392049, 435.117613, 52.908000, X, Y) && !ellipse(26994.537201, 21978.839050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30236.155396, 17609.023239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29902.096954, 18100.961670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24363.694000, 22076.640000, 1268.632037, 1268.632037, 0.000000, X, Y) && !ellipse(25639.262000, 22666.248000, 1210.408035, 1210.408035, 0.000000, X, Y) && !ellipse(31553.902191, 15855.031235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33731.232598, 12885.894257, 3585.392103, 651.913234, 55.200082, X, Y) && !ellipse(31967.218567, 15244.636017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24618.734000, 21642.282000, 2119.472061, 2119.472061, 0.000000, X, Y)
[Thu Jul 12 15:41:47 2012] Writing fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src7.gif
[Thu Jul 12 16:12:24 2012] Mean detx,y = (-205.23, 5283.35) 
[Thu Jul 12 16:12:25 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 16:13:05 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 16:13:05 2012] Setting source spectrum file to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Jul 12 16:13:05 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Thu Jul 12 21:16:10 2012] Updating aperture counts using extracted products
[Thu Jul 12 21:16:10 2012] Error reading totcts from fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Jul 12 21:16:12 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 21:16:12 2012] Using photon index=1.80, rate=0.0581, arf fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src7.arf
[Thu Jul 12 21:16:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 21:16:12 2012] Updating source flux to 8.8e-13
[Thu Jul 12 21:21:53 2012] Flag p found in src. 7 procflags, skipping spectral fitting
[Thu Jul 12 21:21:53 2012] Flag c found in src. 7 procflags, skipping spectral fitting