[Tue Jul 10 22:01:45 2012] Detection parameters:
  Position = (396.5, 138.6) = 11 3 44.15 38 1 5.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.1 +/- 14.4
  Background counts = 7.2
  Rate = 0.009 +/- 0.001

[Tue Jul 10 22:01:46 2012] Off-axis axis estimate = 13.60'
[Wed Jul 11 04:11:33 2012] Using EEF radius (= 13.23 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 04:11:33 2012] Initial guess for spatial extent in simple fitting = 13.23"
[Wed Jul 11 04:11:33 2012] source mask rpix=3.0, npix_max = 50, mask sum = 44, frac = 0.877
[Wed Jul 11 04:11:33 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 13.23"
[Wed Jul 11 09:14:08 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src43.ximg exists
[Wed Jul 11 09:14:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src43.csv
[Wed Jul 11 09:14:08 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src43_1.ximg exists
[Wed Jul 11 09:14:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src43.csv
[Wed Jul 11 09:14:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 09:14:09 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Wed Jul 11 09:14:09 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Wed Jul 11 09:14:09 2012] Fit fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Wed Jul 11 09:14:39 2012] Source 66 is offset by 2.934590 and -0.068207 pixels which is larger than
2 X fitted extent = 1.586736 x 1.586736, not incorporating fit results
[Wed Jul 11 09:14:39 2012] Spatial fit model total counts = 447.948000, observed total counts = 425.000000
[Wed Jul 11 09:14:39 2012] Offset between fit and detection position for source 66 = 1.132593 pixels
[Wed Jul 11 09:14:39 2012] Warning, changing simple spatial fit ID from 43 to 39
Spatial fit parameters:
  Offset between fit and detection position for source 66 = 1.132593 pixels
  Position = (395.9, 137.6) = 11 3 44.37 38 1 0.6
  Extent = 22.8 (20.8-25.9)", rotation angle = 0
  Source counts = 423.5 +/- 20.6
  Background counts = 0.0
  Rate = 0.04 +/- 0.002
 Deleting source due to low signal-to-noise ratio