[Tue Jul 10 22:01:45 2012] Detection parameters:
  Position = (382.4, 156.8) = 11 3 49.34 38 2 24.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 149.0 +/- 16.4
  Background counts = 9.0
  Rate = 0.01 +/- 0.001

[Tue Jul 10 22:01:46 2012] Off-axis axis estimate = 11.94'
[Wed Jul 11 04:11:33 2012] Using EEF radius (= 12.40 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 04:11:33 2012] Initial guess for spatial extent in simple fitting = 12.40"
[Wed Jul 11 04:11:33 2012] source mask rpix=2.8, npix_max = 44, mask sum = 44, frac = 0.980
[Wed Jul 11 04:11:33 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 12.40"
[Wed Jul 11 09:14:08 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src26.ximg exists
[Wed Jul 11 09:14:08 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src26.csv
[Wed Jul 11 09:14:08 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src26_1.ximg exists
[Wed Jul 11 09:14:08 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src26.csv
[Wed Jul 11 09:14:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 09:14:09 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Wed Jul 11 09:14:09 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Wed Jul 11 09:14:09 2012] Fit fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Wed Jul 11 09:14:39 2012] Warning, spatial fit 26 centroid is now closest to src. 65
[Wed Jul 11 09:14:39 2012] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 64 at 13.713248 pixels away
[Wed Jul 11 09:14:39 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 09:14:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 09:14:39 2012] Assessing source extent using major
[Wed Jul 11 09:14:39 2012] Source does appear to be extended
[Wed Jul 11 09:14:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 09:14:39 2012] Source is confused with source 65
[Wed Jul 11 17:23:43 2012] Using EEF radius (= 12.40 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 17:23:43 2012] Initial guess for spatial extent in simple fitting = 12.40"
[Wed Jul 11 17:23:43 2012] source mask rpix=2.8, npix_max = 44, mask sum = 44, frac = 0.980
[Wed Jul 11 17:23:43 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 12.40"
[Wed Jul 11 23:21:00 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src24.ximg exists
[Wed Jul 11 23:21:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src24.csv
[Wed Jul 11 23:21:00 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src24_1.ximg exists
[Wed Jul 11 23:21:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src24.csv
[Wed Jul 11 23:21:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 23:21:01 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Wed Jul 11 23:21:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src24.csv
[Wed Jul 11 23:21:01 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Wed Jul 11 23:21:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src24.csv
[Wed Jul 11 23:21:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 23:21:30 2012] Warning, spatial fit 24 centroid is now closest to src. 65
[Wed Jul 11 23:21:30 2012] Spatial fit model total counts = 503.965000, observed total counts = 462.000000
[Wed Jul 11 23:21:30 2012] Offset between fit and detection position for source 64 = 4.168046 pixels
[Wed Jul 11 23:21:30 2012] Warning, changing simple spatial fit ID from 24 to 29
Spatial fit parameters:
  Offset between fit and detection position for source 64 = 4.168046 pixels
  Position = (379.9, 160.2) = 11 3 50.24 38 2 39.1
  Extent = 22.0 (20.1-24.0)", rotation angle = 0
  Source counts = 502.2 +/- 22.4
  Background counts = 0.0
  Rate = 0.04 +/- 0.002
[Wed Jul 11 23:21:30 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 23:21:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 23:21:30 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 23:21:30 2012] Source does appear to be extended
[Wed Jul 11 23:21:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 15:41:48 2012] XMMSAS src. selection expression = ellipse(33005.764000, 13887.690000, 1322.064038, 1322.064038, 0.000000, X, Y)
[Thu Jul 12 15:41:48 2012] Writing source region out to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src64_src.reg
[Thu Jul 12 15:41:48 2012] Extracting stamp from image fullrun_mos2_xmm0136540801_pi300-10000_cl_sm2.00.img.gz, (304, 84) - (456, 236)
[Thu Jul 12 15:41:48 2012] XMMSAS bgd. selection expression = annulus(33005.764000, 13887.690000, 2203.440063, 4406.880127, X, Y) && !ellipse(28857.175800, 19496.322000, 1488.608043, 361.754410, 53.419000, X, Y) && !ellipse(29351.130585, 18874.744736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30560.765600, 17213.490200, 1700.392049, 435.117613, 52.908000, X, Y) && !ellipse(30236.155396, 17609.023239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29902.096954, 18100.961670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35314.183014, 10914.056892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31553.902191, 15855.031235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32660.640533, 14367.378494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35491.090000, 10549.966000, 1644.072047, 1644.072047, 0.000000, X, Y) && !ellipse(34875.250461, 11281.127570, 3585.392103, 567.185477, 53.548462, X, Y) && !ellipse(33731.232598, 12885.894257, 3585.392103, 651.913234, 55.200082, X, Y) && !ellipse(31967.218567, 15244.636017, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 12 15:41:48 2012] Writing fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src64.gif
[Thu Jul 12 16:25:18 2012] Mean detx,y = (-186.87, 12264.31) 
[Thu Jul 12 16:25:19 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 16:25:53 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 16:25:53 2012] Setting source spectrum file to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src64_src_b10.pi.gz
[Thu Jul 12 16:25:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src64_bgd.pi.gz
[Thu Jul 12 21:16:11 2012] Updating aperture counts using extracted products
[Thu Jul 12 21:16:11 2012] Error reading totcts from fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src64_src_b10.pi.gz
[Thu Jul 12 21:16:13 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 21:16:13 2012] Using photon index=1.80, rate=0.045, arf fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src64.arf
[Thu Jul 12 21:16:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 21:16:13 2012] Updating source flux to 1e-12
[Thu Jul 12 21:21:53 2012] Flag c found in src. 64 procflags, skipping spectral fitting