[Tue Jul 10 22:01:45 2012] Detection parameters:
  Position = (293.3, 266.7) = 11 4 22.15 38 10 29.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 462.6 +/- 30.7
  Background counts = 100.8
  Rate = 0.05 +/- 0.004

[Tue Jul 10 22:01:46 2012] Off-axis axis estimate = 2.33'
[Wed Jul 11 04:11:33 2012] Using EEF radius (= 7.59 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 04:11:33 2012] Initial guess for spatial extent in simple fitting = 7.59"
[Wed Jul 11 04:11:33 2012] source mask rpix=1.7, npix_max = 20, mask sum = 22, frac = 1.091
[Wed Jul 11 04:11:33 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.59"
[Wed Jul 11 09:14:07 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src6.ximg exists
[Wed Jul 11 09:14:07 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src6.csv
[Wed Jul 11 09:14:07 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src6_1.ximg exists
[Wed Jul 11 09:14:07 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src6.csv
[Wed Jul 11 09:14:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 09:14:08 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Wed Jul 11 09:14:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src6.csv
[Wed Jul 11 09:14:08 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Jul 11 09:14:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src6.csv
[Wed Jul 11 09:14:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 09:14:39 2012] Warning, spatial fit 6 centroid is now closest to src. 49
[Wed Jul 11 09:14:39 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 09:14:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 09:14:39 2012] Assessing source extent using major
[Wed Jul 11 09:14:39 2012] Source does appear to be extended
[Wed Jul 11 09:14:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 09:14:39 2012] Source is confused with source 49
[Wed Jul 11 17:23:43 2012] Using EEF radius (= 7.59 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 17:23:43 2012] Initial guess for spatial extent in simple fitting = 7.59"
[Wed Jul 11 17:23:43 2012] source mask rpix=1.7, npix_max = 20, mask sum = 22, frac = 1.091
[Wed Jul 11 17:23:43 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 7.59"
[Wed Jul 11 23:21:00 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src5.ximg exists
[Wed Jul 11 23:21:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src5.csv
[Wed Jul 11 23:21:00 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Jul 11 23:21:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src5.csv
[Wed Jul 11 23:21:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 23:21:01 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Jul 11 23:21:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src5.csv
[Wed Jul 11 23:21:01 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Jul 11 23:21:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src5.csv
[Wed Jul 11 23:21:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 23:21:30 2012] Spatial fit model total counts = 3329.250000, observed total counts = 2918.000000
[Wed Jul 11 23:21:30 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 11 23:21:30 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 23:21:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 23:21:30 2012] Assessing source extent using major
[Wed Jul 11 23:21:30 2012] Source does appear to be extended
[Wed Jul 11 23:21:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 15:41:47 2012] XMMSAS src. selection expression = ellipse(25467.839600, 23157.796844, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 12 15:41:47 2012] Writing source region out to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src6_src.reg
[Thu Jul 12 15:41:47 2012] Extracting stamp from image fullrun_mos2_xmm0136540801_pi300-10000_cl_sm2.00.img.gz, (256, 229) - (331, 304)
[Thu Jul 12 15:41:47 2012] XMMSAS bgd. selection expression = annulus(25467.839600, 23157.796844, 1087.500000, 2175.000000, X, Y) && !ellipse(24578.001221, 25968.102875, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24502.476257, 25532.837372, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24267.460000, 25175.864800, 3500.136101, 3500.136101, 0.000000, X, Y) && !ellipse(28857.175800, 19496.322000, 1488.608043, 361.754410, 53.419000, X, Y) && !ellipse(27856.449982, 20832.524841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28262.621674, 20201.687225, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(27334.765930, 21539.417099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26134.942261, 23196.785950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26577.386000, 22622.738000, 612.219218, 612.219218, 0.000000, X, Y) && !ellipse(26994.537201, 21978.839050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24363.694000, 22076.640000, 1268.632037, 1268.632037, 0.000000, X, Y) && !ellipse(27805.460144, 24762.292114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25639.262000, 22666.248000, 1210.408035, 1210.408035, 0.000000, X, Y) && !ellipse(28380.621720, 26332.732000, 1103.208032, 1103.208032, 0.000000, X, Y) && !ellipse(24618.734000, 21642.282000, 2119.472061, 2119.472061, 0.000000, X, Y)
[Thu Jul 12 15:41:47 2012] Writing fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src6.gif
[Thu Jul 12 16:12:06 2012] Mean detx,y = (-733.21, 273.60) 
[Thu Jul 12 16:12:07 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 16:12:18 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 16:12:18 2012] Setting source spectrum file to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Jul 12 16:12:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu Jul 12 16:55:15 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 12 16:55:15 2012] rmf not generated due to insufficient counts
[Thu Jul 12 21:16:10 2012] Updating aperture counts using extracted products
[Thu Jul 12 21:16:10 2012] Error reading totcts from fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Jul 12 21:16:12 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 21:16:12 2012] Using photon index=1.80, rate=0.0536, arf fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src6.arf
[Thu Jul 12 21:16:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 21:16:12 2012] Updating source flux to 5.4e-13
[Thu Jul 12 21:21:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting