[Tue Jul 10 22:01:45 2012] Detection parameters:
  Position = (353.2, 196.4) = 11 4 0.06 38 5 18.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 176.0 +/- 17.0
  Background counts = 11.7
  Rate = 0.03 +/- 0.003

[Tue Jul 10 22:01:46 2012] Off-axis axis estimate = 8.40'
[Wed Jul 11 04:11:33 2012] Using EEF radius (= 10.63 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 04:11:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 11 04:11:33 2012] Initial guess for spatial extent in simple fitting = 10.63"
[Wed Jul 11 04:11:33 2012] source mask rpix=2.4, npix_max = 34, mask sum = 33, frac = 0.952
[Wed Jul 11 04:11:33 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 10.63"
[Wed Jul 11 09:14:07 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src17.ximg exists
[Wed Jul 11 09:14:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src17.csv
[Wed Jul 11 09:14:07 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src17_1.ximg exists
[Wed Jul 11 09:14:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src17.csv
[Wed Jul 11 09:14:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 09:14:08 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Wed Jul 11 09:14:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src17.csv
[Wed Jul 11 09:14:08 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Wed Jul 11 09:14:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src17.csv
[Wed Jul 11 09:14:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 09:14:39 2012] Warning, spatial fit 17 centroid is now closest to src. 57
[Wed Jul 11 09:14:39 2012] Spatial fit model total counts = 536.165000, observed total counts = 463.000000
[Wed Jul 11 09:14:39 2012] Poor agreement between spatial fit and data for source 59
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 11 09:14:39 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 09:14:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 09:14:39 2012] Assessing source extent using major
[Wed Jul 11 09:14:39 2012] Source does appear to be extended
[Wed Jul 11 09:14:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 17:23:43 2012] Using EEF radius (= 10.63 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 17:23:43 2012] Initial guess for spatial extent in simple fitting = 10.63"
[Wed Jul 11 17:23:43 2012] source mask rpix=2.4, npix_max = 34, mask sum = 33, frac = 0.952
[Wed Jul 11 17:23:43 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 10.63"
[Wed Jul 11 23:21:00 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src16.ximg exists
[Wed Jul 11 23:21:00 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src16_1.ximg exists
[Wed Jul 11 23:21:00 2012] Fit fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src16 appears to have run properly
[Wed Jul 11 23:21:01 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Wed Jul 11 23:21:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src16.csv
[Wed Jul 11 23:21:01 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Wed Jul 11 23:21:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src16.csv
[Wed Jul 11 23:21:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 23:21:30 2012] Spatial fit model total counts = 778.356000, observed total counts = 734.000000
[Wed Jul 11 23:21:30 2012] Offset between fit and detection position for source 59 = 2.464123 pixels
[Wed Jul 11 23:21:30 2012] 781.694000 total counts/ 403.259000 bgd. counts: snr = 18.845135
Spatial fit parameters:
  Offset between fit and detection position for source 59 = 2.464123 pixels
  Position = (351.8, 198.4) = 11 4 0.58 38 5 25.5
  Extent = 21.3 (20.9-42.5)" x 5.4 (4.2-6.9)", rotation angle = 53 (50-55) degrees
  Source counts = 378.4 +/- 28.0
  Background counts = 403.3
  Rate = 0.03 +/- 0.003
[Wed Jul 11 23:21:30 2012] Spatial fit model total counts = 768.026000, observed total counts = 653.000000
[Wed Jul 11 23:21:30 2012] Poor agreement between spatial fit and data for source 59
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 11 23:21:30 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 23:21:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 23:21:30 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 23:21:30 2012] Source does appear to be extended
[Wed Jul 11 23:21:30 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.03
[Wed Jul 11 23:21:30 2012] Source is asymmetric
[Wed Jul 11 23:21:30 2012] Source is confused with source 57
[Wed Jul 11 23:21:30 2012] Source is confused with source 56
[Thu Jul 12 15:41:48 2012] XMMSAS src. selection expression = ellipse(30560.765600, 17213.490200, 1275.294037, 326.338209, 52.908000, X, Y)
[Thu Jul 12 15:41:48 2012] Writing source region out to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src59_src.reg
[Thu Jul 12 15:41:48 2012] Extracting stamp from image fullrun_mos2_xmm0136540801_pi300-10000_cl_sm2.00.img.gz, (279, 125) - (425, 272)
[Thu Jul 12 15:41:48 2012] XMMSAS bgd. selection expression = annulus(30560.765600, 17213.490200, 2125.490061, 4250.980122, X, Y) && !ellipse(28857.175800, 19496.322000, 1488.608043, 361.754410, 53.419000, X, Y) && !ellipse(29351.130585, 18874.744736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29022.658325, 19280.447815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27856.449982, 20832.524841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28262.621674, 20201.687225, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(27334.765930, 21539.417099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26994.537201, 21978.839050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30236.155396, 17609.023239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29902.096954, 18100.961670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33005.764000, 13887.690000, 1762.752051, 1762.752051, 0.000000, X, Y) && !ellipse(25639.262000, 22666.248000, 1210.408035, 1210.408035, 0.000000, X, Y) && !ellipse(31553.902191, 15855.031235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32660.640533, 14367.378494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34875.250461, 11281.127570, 3585.392103, 567.185477, 53.548462, X, Y) && !ellipse(33731.232598, 12885.894257, 3585.392103, 651.913234, 55.200082, X, Y) && !ellipse(31967.218567, 15244.636017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24618.734000, 21642.282000, 2119.472061, 2119.472061, 0.000000, X, Y)
[Thu Jul 12 15:41:48 2012] Writing fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src59.gif
[Thu Jul 12 16:21:32 2012] Mean detx,y = (-221.74, 8165.75) 
[Thu Jul 12 16:21:33 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 16:22:18 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 16:22:18 2012] Setting source spectrum file to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Thu Jul 12 16:22:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src59_bgd.pi.gz
[Thu Jul 12 21:16:10 2012] Updating aperture counts using extracted products
[Thu Jul 12 21:16:10 2012] Error reading totcts from fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Thu Jul 12 21:16:12 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 21:16:12 2012] Using photon index=1.80, rate=0.0339, arf fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src59.arf
[Thu Jul 12 21:16:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 21:16:12 2012] Updating source flux to 6.1e-13
[Thu Jul 12 21:21:53 2012] Flag p found in src. 59 procflags, skipping spectral fitting
[Thu Jul 12 21:21:53 2012] Flag c found in src. 59 procflags, skipping spectral fitting