[Tue Jul 10 22:01:45 2012] Detection parameters:
  Position = (320.7, 240.0) = 11 4 12.02 38 8 26.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 337.0 +/- 24.3
  Background counts = 42.4
  Rate = 0.04 +/- 0.003

[Tue Jul 10 22:01:46 2012] Off-axis axis estimate = 4.53'
[Wed Jul 11 04:11:33 2012] Using EEF radius (= 8.70 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 04:11:33 2012] Initial guess for spatial extent in simple fitting = 8.70"
[Wed Jul 11 04:11:33 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.801
[Wed Jul 11 04:11:33 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 8.70"
[Wed Jul 11 09:14:07 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src11.ximg exists
[Wed Jul 11 09:14:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src11.csv
[Wed Jul 11 09:14:07 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Jul 11 09:14:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src11.csv
[Wed Jul 11 09:14:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 09:14:08 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Jul 11 09:14:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed Jul 11 09:14:08 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Jul 11 09:14:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src11.csv
[Wed Jul 11 09:14:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 09:14:39 2012] Warning, spatial fit 11 centroid is now closest to src. 68
[Wed Jul 11 09:14:39 2012] Spatial fit model total counts = 1543.980000, observed total counts = 1214.000000
[Wed Jul 11 09:14:39 2012] Poor agreement between spatial fit and data for source 52
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 11 09:14:39 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 09:14:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 09:14:39 2012] Assessing source extent using major
[Wed Jul 11 09:14:39 2012] Source does appear to be extended
[Wed Jul 11 09:14:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 09:14:39 2012] Source is confused with source 68
[Wed Jul 11 17:23:43 2012] Using EEF radius (= 8.70 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 17:23:43 2012] Initial guess for spatial extent in simple fitting = 8.70"
[Wed Jul 11 17:23:43 2012] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.801
[Wed Jul 11 17:23:43 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 8.70"
[Wed Jul 11 23:21:00 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src10.ximg exists
[Wed Jul 11 23:21:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src10.csv
[Wed Jul 11 23:21:00 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed Jul 11 23:21:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src10.csv
[Wed Jul 11 23:21:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 23:21:01 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed Jul 11 23:21:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src10.csv
[Wed Jul 11 23:21:01 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Jul 11 23:21:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src10.csv
[Wed Jul 11 23:21:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 23:21:30 2012] Spatial fit model total counts = 1414.080000, observed total counts = 1277.000000
[Wed Jul 11 23:21:30 2012] Poor agreement between spatial fit and data for source 52
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 11 23:21:30 2012] Spatial fit model total counts = 1620.400000, observed total counts = 1214.000000
[Wed Jul 11 23:21:30 2012] Poor agreement between spatial fit and data for source 52
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 11 23:21:30 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 23:21:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 23:21:30 2012] Assessing source extent using major
[Wed Jul 11 23:21:30 2012] Source does appear to be extended
[Wed Jul 11 23:21:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 15:41:47 2012] XMMSAS src. selection expression = ellipse(27856.449982, 20832.524841, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 12 15:41:47 2012] Writing source region out to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src52_src.reg
[Thu Jul 12 15:41:47 2012] Extracting stamp from image fullrun_mos2_xmm0136540801_pi300-10000_cl_sm2.00.img.gz, (283, 203) - (358, 278)
[Thu Jul 12 15:41:47 2012] XMMSAS bgd. selection expression = annulus(27856.449982, 20832.524841, 1087.500000, 2175.000000, X, Y) && !ellipse(24502.476257, 25532.837372, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24267.460000, 25175.864800, 3500.136101, 3500.136101, 0.000000, X, Y) && !ellipse(25467.839600, 23157.796844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28857.175800, 19496.322000, 1488.608043, 361.754410, 53.419000, X, Y) && !ellipse(29351.130585, 18874.744736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29022.658325, 19280.447815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28262.621674, 20201.687225, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(27334.765930, 21539.417099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26134.942261, 23196.785950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26577.386000, 22622.738000, 612.219218, 612.219218, 0.000000, X, Y) && !ellipse(30560.765600, 17213.490200, 1700.392049, 435.117613, 52.908000, X, Y) && !ellipse(26994.537201, 21978.839050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29902.096954, 18100.961670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25639.262000, 22666.248000, 1210.408035, 1210.408035, 0.000000, X, Y) && !ellipse(24618.734000, 21642.282000, 2119.472061, 2119.472061, 0.000000, X, Y)
[Thu Jul 12 15:41:47 2012] Writing fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src52.gif
[Thu Jul 12 16:14:59 2012] Mean detx,y = (-199.02, 3640.71) 
[Thu Jul 12 16:15:01 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 16:15:15 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 16:15:15 2012] Setting source spectrum file to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Thu Jul 12 16:15:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Thu Jul 12 17:03:29 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 12 17:03:29 2012] rmf not generated due to insufficient counts
[Thu Jul 12 21:16:10 2012] Updating aperture counts using extracted products
[Thu Jul 12 21:16:10 2012] Error reading totcts from fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Thu Jul 12 21:16:12 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 21:16:12 2012] Using photon index=1.80, rate=0.0377, arf fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src52.arf
[Thu Jul 12 21:16:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 21:16:12 2012] Updating source flux to 4.9e-13
[Thu Jul 12 21:21:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting