[Tue Jul 10 22:01:45 2012] Detection parameters:
  Position = (262.0, 310.7) = 11 4 33.71 38 13 38.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 961.9 +/- 43.1
  Background counts = 94.1
  Rate = 0.1 +/- 0.005

[Tue Jul 10 22:01:46 2012] Off-axis axis estimate = 2.79'
[Wed Jul 11 04:11:33 2012] Using EEF radius (= 7.82 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 04:11:33 2012] Initial guess for spatial extent in simple fitting = 7.82"
[Wed Jul 11 04:11:33 2012] source mask rpix=1.8, npix_max = 21, mask sum = 17, frac = 0.805
[Wed Jul 11 04:11:33 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.82"
[Wed Jul 11 09:14:07 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src4.ximg exists
[Wed Jul 11 09:14:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src4.csv
[Wed Jul 11 09:14:07 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Jul 11 09:14:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src4.csv
[Wed Jul 11 09:14:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 09:14:08 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Jul 11 09:14:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Jul 11 09:14:08 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Jul 11 09:14:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Jul 11 09:14:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 09:14:39 2012] Spatial fit model total counts = 7338.620000, observed total counts = 9461.000000
[Wed Jul 11 09:14:39 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 11 09:14:39 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 09:14:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 09:14:39 2012] Assessing source extent using major
[Wed Jul 11 09:14:39 2012] Source does appear to be extended
[Wed Jul 11 09:14:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 17:23:43 2012] Using EEF radius (= 7.82 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 17:23:43 2012] Initial guess for spatial extent in simple fitting = 7.82"
[Wed Jul 11 17:23:43 2012] source mask rpix=1.8, npix_max = 21, mask sum = 17, frac = 0.805
[Wed Jul 11 17:23:43 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.82"
[Wed Jul 11 23:21:00 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src3.ximg exists
[Wed Jul 11 23:21:00 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Jul 11 23:21:00 2012] Fit fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src3 appears to have run properly
[Wed Jul 11 23:21:01 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Jul 11 23:21:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed Jul 11 23:21:01 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Jul 11 23:21:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed Jul 11 23:21:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 23:21:30 2012] Source 5 is offset by -7.409682 and 6.005609 pixels which is larger than
2 X fitted extent = 7.035127 x 7.035127, not incorporating fit results
[Wed Jul 11 23:21:30 2012] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 14.313567 pixels away
[Wed Jul 11 23:21:30 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 23:21:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 23:21:30 2012] Assessing source extent using major
[Wed Jul 11 23:21:30 2012] Source does appear to be extended
[Wed Jul 11 23:21:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 15:41:47 2012] XMMSAS src. selection expression = ellipse(22742.831696, 26981.235504, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 12 15:41:47 2012] Writing source region out to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src5_src.reg
[Thu Jul 12 15:41:47 2012] Extracting stamp from image fullrun_mos2_xmm0136540801_pi300-10000_cl_sm2.00.img.gz, (224, 273) - (299, 348)
[Thu Jul 12 15:41:47 2012] XMMSAS bgd. selection expression = annulus(22742.831696, 26981.235504, 1087.500000, 2175.000000, X, Y) && !ellipse(24578.001221, 25968.102875, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24502.476257, 25532.837372, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24267.460000, 25175.864800, 3500.136101, 3500.136101, 0.000000, X, Y) && !ellipse(22630.101807, 27885.323425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22579.859000, 28582.750000, 1283.952037, 1006.320029, 353.373000, X, Y) && !ellipse(24354.176200, 27934.598000, 1229.928035, 1229.928035, 0.000000, X, Y) && !ellipse(21833.858521, 28110.384949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21639.478000, 25808.016000, 1355.776039, 1355.776039, 0.000000, X, Y) && !ellipse(23768.458893, 28912.185211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21441.196000, 24476.835000, 1375.840040, 1375.840040, 0.000000, X, Y)
[Thu Jul 12 15:41:47 2012] Writing fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src5.gif
[Thu Jul 12 16:11:27 2012] Mean detx,y = (-734.76, -4212.12) 
[Thu Jul 12 16:11:28 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 16:11:38 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 16:11:38 2012] Setting source spectrum file to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jul 12 16:11:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Jul 12 16:54:49 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 12 16:54:49 2012] rmf not generated due to insufficient counts
[Thu Jul 12 21:16:10 2012] Updating aperture counts using extracted products
[Thu Jul 12 21:16:10 2012] Error reading totcts from fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jul 12 21:16:12 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 21:16:12 2012] Using photon index=1.80, rate=0.12, arf fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src5.arf
[Thu Jul 12 21:16:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 21:16:12 2012] Updating source flux to 1.4e-12
[Thu Jul 12 21:21:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting