[Tue Jul 10 22:01:45 2012] Detection parameters:
  Position = (241.8, 279.2) = 11 4 41.16 38 11 18.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.7 +/- 16.8
  Background counts = 54.1
  Rate = 0.01 +/- 0.002

[Tue Jul 10 22:01:46 2012] Off-axis axis estimate = 4.34'
[Wed Jul 11 04:11:33 2012] Using EEF radius (= 8.60 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 04:11:33 2012] Initial guess for spatial extent in simple fitting = 8.60"
[Wed Jul 11 04:11:33 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.019
[Wed Jul 11 04:11:33 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 8.60"
[Wed Jul 11 09:14:08 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src37.ximg exists
[Wed Jul 11 09:14:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src37.csv
[Wed Jul 11 09:14:08 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src37_1.ximg exists
[Wed Jul 11 09:14:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src37.csv
[Wed Jul 11 09:14:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 09:14:09 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Wed Jul 11 09:14:09 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Wed Jul 11 09:14:09 2012] Fit fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Wed Jul 11 09:14:39 2012] Source 43 is offset by 8.657394 and 3.907392 pixels which is larger than
2 X fitted extent = 1.869398 x 1.869398, not incorporating fit results
[Wed Jul 11 09:14:39 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 09:14:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 09:14:39 2012] Assessing source extent using major
[Wed Jul 11 09:14:39 2012] Source does appear to be extended
[Wed Jul 11 09:14:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 17:23:43 2012] Using EEF radius (= 8.60 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 17:23:43 2012] Initial guess for spatial extent in simple fitting = 8.60"
[Wed Jul 11 17:23:43 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.019
[Wed Jul 11 17:23:43 2012] Giving source the simple spatial ID 34 for pass 1, mean size = 8.60"
[Wed Jul 11 23:21:00 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src34.ximg exists
[Wed Jul 11 23:21:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src34.csv
[Wed Jul 11 23:21:00 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src34_1.ximg exists
[Wed Jul 11 23:21:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src34.csv
[Wed Jul 11 23:21:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 23:21:01 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Wed Jul 11 23:21:01 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Wed Jul 11 23:21:01 2012] Fit fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly
[Wed Jul 11 23:21:30 2012] Spatial fit model total counts = 928.305000, observed total counts = 924.000000
[Wed Jul 11 23:21:30 2012] Offset between fit and detection position for source 43 = 5.929175 pixels
[Wed Jul 11 23:21:30 2012] 908.029000 total counts/ 499.273000 bgd. counts: snr = 18.293428
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 5.929175 pixels
  Position = (247.0, 281.9) = 11 4 39.23 38 11 28.7
  Extent = 17.2 (17.2-34.4)", rotation angle = 0
  Source counts = 408.8 +/- 30.1
  Background counts = 499.3
  Rate = 0.04 +/- 0.003
[Wed Jul 11 23:21:30 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 23:21:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 23:21:30 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 23:21:30 2012] Source does appear to be extended
[Wed Jul 11 23:21:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 15:41:48 2012] XMMSAS src. selection expression = ellipse(21441.196000, 24476.835000, 1031.880030, 1031.880030, 0.000000, X, Y)
[Thu Jul 12 15:41:48 2012] Writing source region out to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src43_src.reg
[Thu Jul 12 15:41:48 2012] Extracting stamp from image fullrun_mos2_xmm0136540801_pi300-10000_cl_sm2.00.img.gz, (188, 223) - (306, 341)
[Thu Jul 12 15:41:48 2012] XMMSAS bgd. selection expression = annulus(21441.196000, 24476.835000, 1719.800049, 3439.600099, X, Y) && !ellipse(24578.001221, 25968.102875, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24502.476257, 25532.837372, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24267.460000, 25175.864800, 3500.136101, 3500.136101, 0.000000, X, Y) && !ellipse(22742.831696, 26981.235504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22630.101807, 27885.323425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25467.839600, 23157.796844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22579.859000, 28582.750000, 1283.952037, 1006.320029, 353.373000, X, Y) && !ellipse(24354.176200, 27934.598000, 1229.928035, 1229.928035, 0.000000, X, Y) && !ellipse(21833.858521, 28110.384949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24363.694000, 22076.640000, 1268.632037, 1268.632037, 0.000000, X, Y) && !ellipse(25639.262000, 22666.248000, 1210.408035, 1210.408035, 0.000000, X, Y) && !ellipse(21639.478000, 25808.016000, 1355.776039, 1355.776039, 0.000000, X, Y) && !ellipse(18585.892151, 27609.744659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24618.734000, 21642.282000, 2119.472061, 2119.472061, 0.000000, X, Y) && !ellipse(18397.950000, 24901.480000, 1514.272044, 1514.272044, 0.000000, X, Y)
[Thu Jul 12 15:41:48 2012] Writing fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src43.gif
[Thu Jul 12 16:33:50 2012] Mean detx,y = (-3010.69, -3101.59) 
[Thu Jul 12 16:33:51 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 16:34:07 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 16:34:08 2012] Setting source spectrum file to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Thu Jul 12 16:34:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Thu Jul 12 21:16:11 2012] Updating aperture counts using extracted products
[Thu Jul 12 21:16:11 2012] Error reading totcts from fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Thu Jul 12 21:16:13 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 21:16:13 2012] Using photon index=1.80, rate=0.0366, arf fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src43.arf
[Thu Jul 12 21:16:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 21:16:13 2012] Updating source flux to 3.8e-13
[Thu Jul 12 21:21:53 2012] Flag b found in src. 43 procflags, skipping spectral fitting