[Tue Jul 10 22:01:45 2012] Detection parameters:
  Position = (320.2, 285.2) = 11 4 12.23 38 11 40.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 131.3 +/- 18.4
  Background counts = 69.8
  Rate = 0.01 +/- 0.002

[Tue Jul 10 22:01:46 2012] Off-axis axis estimate = 1.85'
[Wed Jul 11 04:11:33 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 04:11:33 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Wed Jul 11 04:11:33 2012] source mask rpix=1.7, npix_max = 19, mask sum = 11, frac = 0.573
[Wed Jul 11 04:11:33 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 7.35"
[Wed Jul 11 09:14:08 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src27.ximg exists
[Wed Jul 11 09:14:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src27.csv
[Wed Jul 11 09:14:08 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src27_1.ximg exists
[Wed Jul 11 09:14:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src27.csv
[Wed Jul 11 09:14:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 09:14:09 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Wed Jul 11 09:14:09 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Wed Jul 11 09:14:09 2012] Fit fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Wed Jul 11 09:14:39 2012] Source 42 is offset by 6.920071 and 0.891801 pixels which is larger than
2 X fitted extent = 5.638069 x 5.638069, not incorporating fit results
[Wed Jul 11 09:14:39 2012] Warning: source 41 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 10.609731 pixels away
[Wed Jul 11 09:14:39 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 09:14:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 09:14:39 2012] Assessing source extent using major
[Wed Jul 11 09:14:39 2012] Source does appear to be extended
[Wed Jul 11 09:14:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 17:23:43 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 17:23:43 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Wed Jul 11 17:23:43 2012] source mask rpix=1.7, npix_max = 19, mask sum = 11, frac = 0.573
[Wed Jul 11 17:23:43 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 7.35"
[Wed Jul 11 23:21:00 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src25.ximg exists
[Wed Jul 11 23:21:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src25.csv
[Wed Jul 11 23:21:00 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src25_1.ximg exists
[Wed Jul 11 23:21:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src25.csv
[Wed Jul 11 23:21:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 23:21:01 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Wed Jul 11 23:21:01 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Wed Jul 11 23:21:01 2012] Fit fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Wed Jul 11 23:21:30 2012] Source 42 is offset by 6.920071 and 0.903528 pixels which is larger than
2 X fitted extent = 5.640552 x 5.640552, not incorporating fit results
[Wed Jul 11 23:21:30 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 23:21:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 23:21:30 2012] Assessing source extent using major
[Wed Jul 11 23:21:30 2012] Source does appear to be extended
[Wed Jul 11 23:21:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 15:41:48 2012] XMMSAS src. selection expression = ellipse(27805.460144, 24762.292114, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 12 15:41:48 2012] Writing source region out to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src42_src.reg
[Thu Jul 12 15:41:48 2012] Extracting stamp from image fullrun_mos2_xmm0136540801_pi300-10000_cl_sm2.00.img.gz, (283, 248) - (358, 323)
[Thu Jul 12 15:41:48 2012] XMMSAS bgd. selection expression = annulus(27805.460144, 24762.292114, 1087.500000, 2175.000000, X, Y) && !ellipse(24578.001221, 25968.102875, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24502.476257, 25532.837372, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24267.460000, 25175.864800, 3500.136101, 3500.136101, 0.000000, X, Y) && !ellipse(25467.839600, 23157.796844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26134.942261, 23196.785950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26577.386000, 22622.738000, 612.219218, 612.219218, 0.000000, X, Y) && !ellipse(26994.537201, 21978.839050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27234.304000, 27096.446000, 1180.640034, 1180.640034, 0.000000, X, Y) && !ellipse(24363.694000, 22076.640000, 1268.632037, 1268.632037, 0.000000, X, Y) && !ellipse(25639.262000, 22666.248000, 1210.408035, 1210.408035, 0.000000, X, Y) && !ellipse(28380.621720, 26332.732000, 1103.208032, 1103.208032, 0.000000, X, Y) && !ellipse(26503.318000, 28054.888000, 1213.224035, 1213.224035, 0.000000, X, Y) && !ellipse(24618.734000, 21642.282000, 2119.472061, 2119.472061, 0.000000, X, Y)
[Thu Jul 12 15:41:48 2012] Writing fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src42.gif
[Thu Jul 12 16:25:58 2012] Mean detx,y = (1905.15, 347.11) 
[Thu Jul 12 16:26:00 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 16:26:10 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 16:26:11 2012] Setting source spectrum file to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Thu Jul 12 16:26:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Thu Jul 12 18:07:50 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 12 18:07:50 2012] rmf not generated due to insufficient counts
[Thu Jul 12 21:16:11 2012] Updating aperture counts using extracted products
[Thu Jul 12 21:16:11 2012] Error reading totcts from fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Thu Jul 12 21:16:13 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 21:16:13 2012] Using photon index=1.80, rate=0.0132, arf fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src42.arf
[Thu Jul 12 21:16:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 21:16:13 2012] Updating source flux to 1.3e-13
[Thu Jul 12 21:21:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting