[Tue Jul 10 22:01:45 2012] Detection parameters:
  Position = (242.3, 291.4) = 11 4 40.98 38 12 3.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.5 +/- 19.5
  Background counts = 58.4
  Rate = 0.01 +/- 0.002

[Tue Jul 10 22:01:46 2012] Off-axis axis estimate = 4.11'
[Wed Jul 11 04:11:33 2012] Using EEF radius (= 8.48 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 04:11:33 2012] Initial guess for spatial extent in simple fitting = 8.48"
[Wed Jul 11 04:11:33 2012] source mask rpix=1.9, npix_max = 24, mask sum = 25, frac = 1.042
[Wed Jul 11 04:11:33 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 8.48"
[Wed Jul 11 09:14:08 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src33.ximg exists
[Wed Jul 11 09:14:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src33.csv
[Wed Jul 11 09:14:08 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src33_1.ximg exists
[Wed Jul 11 09:14:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src33.csv
[Wed Jul 11 09:14:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 09:14:09 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Wed Jul 11 09:14:09 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Wed Jul 11 09:14:09 2012] Fit fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Wed Jul 11 09:14:39 2012] Spatial fit model total counts = 1623.140000, observed total counts = 1621.000000
[Wed Jul 11 09:14:39 2012] Offset between fit and detection position for source 39 = 9.143300 pixels
[Wed Jul 11 09:14:39 2012] 1679.807000 total counts/ 1368.500000 bgd. counts: snr = 8.415240
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 9.143300 pixels
  Position = (249.3, 297.2) = 11 4 38.39 38 12 35.2
  Extent = 16.9 (16.9-17.0)", rotation angle = 0
  Source counts = 311.3 +/- 41.0
  Background counts = 1368.5
  Rate = 0.03 +/- 0.004
[Wed Jul 11 09:14:39 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 09:14:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 09:14:39 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 09:14:39 2012] Source does appear to be extended
[Wed Jul 11 09:14:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 17:23:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 11 17:23:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 11 17:23:43 2012] Initial guess for spatial extent in simple fitting = 16.95"
[Wed Jul 11 17:23:43 2012] source mask rpix=3.9, npix_max = 77, mask sum = 81, frac = 1.048
[Wed Jul 11 17:23:43 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 16.95"
[Wed Jul 11 23:21:00 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src30.ximg exists
[Wed Jul 11 23:21:00 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src30.csv
[Wed Jul 11 23:21:00 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src30_1.ximg exists
[Wed Jul 11 23:21:00 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src30.csv
[Wed Jul 11 23:21:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 23:21:01 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Wed Jul 11 23:21:01 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Wed Jul 11 23:21:01 2012] Fit fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Wed Jul 11 23:21:30 2012] Warning, spatial fit 30 centroid is now closest to src. 5
[Wed Jul 11 23:21:30 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 23:21:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 23:21:30 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 23:21:30 2012] Source does appear to be extended
[Wed Jul 11 23:21:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 15:41:48 2012] XMMSAS src. selection expression = ellipse(21639.478000, 25808.016000, 1016.832029, 1016.832029, 0.000000, X, Y)
[Thu Jul 12 15:41:48 2012] Writing source region out to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src39_src.reg
[Thu Jul 12 15:41:48 2012] Extracting stamp from image fullrun_mos2_xmm0136540801_pi300-10000_cl_sm2.00.img.gz, (191, 239) - (308, 356)
[Thu Jul 12 15:41:48 2012] XMMSAS bgd. selection expression = annulus(21639.478000, 25808.016000, 1694.720049, 3389.440098, X, Y) && !ellipse(24578.001221, 25968.102875, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24502.476257, 25532.837372, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24267.460000, 25175.864800, 3500.136101, 3500.136101, 0.000000, X, Y) && !ellipse(22742.831696, 26981.235504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22630.101807, 27885.323425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25467.839600, 23157.796844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22579.859000, 28582.750000, 1283.952037, 1006.320029, 353.373000, X, Y) && !ellipse(24354.176200, 27934.598000, 1229.928035, 1229.928035, 0.000000, X, Y) && !ellipse(21833.858521, 28110.384949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24363.694000, 22076.640000, 1268.632037, 1268.632037, 0.000000, X, Y) && !ellipse(25639.262000, 22666.248000, 1210.408035, 1210.408035, 0.000000, X, Y) && !ellipse(18585.892151, 27609.744659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23768.458893, 28912.185211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21441.196000, 24476.835000, 1375.840040, 1375.840040, 0.000000, X, Y) && !ellipse(24618.734000, 21642.282000, 2119.472061, 2119.472061, 0.000000, X, Y) && !ellipse(18397.950000, 24901.480000, 1514.272044, 1514.272044, 0.000000, X, Y)
[Thu Jul 12 15:41:48 2012] Writing fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src39.gif
[Thu Jul 12 16:32:01 2012] Mean detx,y = (-1968.66, -4001.75) 
[Thu Jul 12 16:32:02 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 16:32:24 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 16:32:24 2012] Setting source spectrum file to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Thu Jul 12 16:32:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Thu Jul 12 21:16:11 2012] Updating aperture counts using extracted products
[Thu Jul 12 21:16:11 2012] Error reading totcts from fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Thu Jul 12 21:16:13 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 21:16:13 2012] Using photon index=1.80, rate=0.0279, arf fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src39.arf
[Thu Jul 12 21:16:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 21:16:13 2012] Updating source flux to 2.6e-13