[Tue Jul 10 22:01:45 2012] Detection parameters:
  Position = (327.2, 304.9) = 11 4 9.63 38 13 9.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121.4 +/- 18.4
  Background counts = 58.2
  Rate = 0.01 +/- 0.002

[Tue Jul 10 22:01:46 2012] Off-axis axis estimate = 2.14'
[Wed Jul 11 04:11:33 2012] Using EEF radius (= 7.50 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 04:11:33 2012] Initial guess for spatial extent in simple fitting = 7.50"
[Wed Jul 11 04:11:33 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.809
[Wed Jul 11 04:11:33 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 7.50"
[Wed Jul 11 09:14:08 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src29.ximg exists
[Wed Jul 11 09:14:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src29.csv
[Wed Jul 11 09:14:08 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src29_1.ximg exists
[Wed Jul 11 09:14:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src29.csv
[Wed Jul 11 09:14:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 09:14:09 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Wed Jul 11 09:14:09 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Wed Jul 11 09:14:09 2012] Fit fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Wed Jul 11 09:14:39 2012] Spatial fit model total counts = 1138.030000, observed total counts = 1140.000000
[Wed Jul 11 09:14:39 2012] Offset between fit and detection position for source 34 = 1.712678 pixels
[Wed Jul 11 09:14:39 2012] 1064.244000 total counts/ 885.199000 bgd. counts: snr = 6.017855
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 1.712678 pixels
  Position = (326.8, 303.2) = 11 4 9.79 38 13 1.5
  Extent = 13.8 (11.4-15.0)", rotation angle = 0
  Source counts = 179.0 +/- 32.6
  Background counts = 885.2
  Rate = 0.02 +/- 0.003
[Wed Jul 11 09:14:39 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 09:14:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 09:14:39 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 09:14:39 2012] Source does appear to be extended
[Wed Jul 11 09:14:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 17:23:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 11 17:23:43 2012] Initial guess for spatial extent in simple fitting = 13.79"
[Wed Jul 11 17:23:43 2012] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.909
[Wed Jul 11 17:23:43 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 13.79"
[Wed Jul 11 23:21:00 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src27.ximg exists
[Wed Jul 11 23:21:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src27.csv
[Wed Jul 11 23:21:00 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src27_1.ximg exists
[Wed Jul 11 23:21:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src27.csv
[Wed Jul 11 23:21:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 23:21:01 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Wed Jul 11 23:21:01 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Wed Jul 11 23:21:01 2012] Fit fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Wed Jul 11 23:21:30 2012] Warning, spatial fit 27 centroid is now closest to src. 38
[Wed Jul 11 23:21:30 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 23:21:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 23:21:30 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 23:21:30 2012] Source does appear to be extended
[Wed Jul 11 23:21:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 15:41:48 2012] XMMSAS src. selection expression = ellipse(28380.621720, 26332.732000, 827.406024, 827.406024, 0.000000, X, Y)
[Thu Jul 12 15:41:48 2012] Writing source region out to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src34_src.reg
[Thu Jul 12 15:41:48 2012] Extracting stamp from image fullrun_mos2_xmm0136540801_pi300-10000_cl_sm2.00.img.gz, (279, 256) - (374, 351)
[Thu Jul 12 15:41:48 2012] XMMSAS bgd. selection expression = annulus(28380.621720, 26332.732000, 1379.010040, 2758.020079, X, Y) && !ellipse(24578.001221, 25968.102875, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24502.476257, 25532.837372, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24267.460000, 25175.864800, 3500.136101, 3500.136101, 0.000000, X, Y) && !ellipse(25467.839600, 23157.796844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26134.942261, 23196.785950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27234.304000, 27096.446000, 1180.640034, 1180.640034, 0.000000, X, Y) && !ellipse(27805.460144, 24762.292114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25639.262000, 22666.248000, 1210.408035, 1210.408035, 0.000000, X, Y) && !ellipse(26503.318000, 28054.888000, 1213.224035, 1213.224035, 0.000000, X, Y) && !ellipse(25982.779877, 28919.489197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24618.734000, 21642.282000, 2119.472061, 2119.472061, 0.000000, X, Y)
[Thu Jul 12 15:41:48 2012] Writing fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src34.gif
[Thu Jul 12 16:30:58 2012] Mean detx,y = (3316.77, -548.42) 
[Thu Jul 12 16:31:00 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 16:31:11 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 16:31:11 2012] Setting source spectrum file to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Thu Jul 12 16:31:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Thu Jul 12 21:16:11 2012] Updating aperture counts using extracted products
[Thu Jul 12 21:16:11 2012] Error reading totcts from fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Thu Jul 12 21:16:13 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 21:16:13 2012] Using photon index=1.80, rate=0.016, arf fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src34.arf
[Thu Jul 12 21:16:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 21:16:13 2012] Updating source flux to 1.6e-13