[Tue Jul 10 22:01:45 2012] Detection parameters:
  Position = (232.3, 313.9) = 11 4 44.68 38 13 48.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 157.6 +/- 18.4
  Background counts = 43.7
  Rate = 0.02 +/- 0.002

[Tue Jul 10 22:01:46 2012] Off-axis axis estimate = 4.93'
[Wed Jul 11 04:11:33 2012] Using EEF radius (= 8.89 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 04:11:33 2012] Initial guess for spatial extent in simple fitting = 8.89"
[Wed Jul 11 04:11:33 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.966
[Wed Jul 11 04:11:33 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 8.89"
[Wed Jul 11 09:14:07 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src22.ximg exists
[Wed Jul 11 09:14:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src22.csv
[Wed Jul 11 09:14:07 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src22_1.ximg exists
[Wed Jul 11 09:14:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src22.csv
[Wed Jul 11 09:14:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 09:14:08 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Wed Jul 11 09:14:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src22.csv
[Wed Jul 11 09:14:08 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Wed Jul 11 09:14:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src22.csv
[Wed Jul 11 09:14:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 09:14:39 2012] Spatial fit model total counts = 1156.820000, observed total counts = 1044.000000
[Wed Jul 11 09:14:39 2012] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 11 09:14:39 2012] Spatial fit model total counts = 911.465000, observed total counts = 833.000000
[Wed Jul 11 09:14:39 2012] Offset between fit and detection position for source 30 = 0.079373 pixels
[Wed Jul 11 09:14:39 2012] Warning, changing simple spatial fit ID from 22 to 45
[Wed Jul 11 09:14:39 2012] 935.854500 total counts/ 912.845000 bgd. counts: snr = 0.761568
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.079373 pixels
  Position = (232.3, 314.0) = 11 4 44.67 38 13 48.3
  Extent = 2.3 (2.3-4.3)", rotation angle = 0
  Source counts = 23.0 +/- 30.6
  Background counts = 912.8
  Rate = 0.002 +/- 0.003
  Deleting source due to low Poisson probability