[Tue Jul 10 22:01:44 2012] Detection parameters:
  Position = (283.1, 299.0) = 11 4 25.92 38 12 44.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80027.1 +/- 399.8
  Background counts = 125.2
  Rate = 7 +/- 0.04

[Tue Jul 10 22:01:46 2012] Off-axis axis estimate = 1.12'
[Wed Jul 11 04:11:33 2012] Using EEF radius (= 6.99 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 04:11:33 2012] Initial guess for spatial extent in simple fitting = 6.99"
[Wed Jul 11 04:11:33 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.902
[Wed Jul 11 04:11:33 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 6.99"
[Wed Jul 11 09:14:07 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jul 11 09:14:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src1.csv
[Wed Jul 11 09:14:07 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jul 11 09:14:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src1.csv
[Wed Jul 11 09:14:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 09:14:08 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jul 11 09:14:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jul 11 09:14:08 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jul 11 09:14:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jul 11 09:14:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 09:14:39 2012] Spatial fit model total counts = 190613.000000, observed total counts = 212767.000000
[Wed Jul 11 09:14:39 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 11 09:14:39 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 09:14:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 09:14:39 2012] Assessing source extent using major
[Wed Jul 11 09:14:39 2012] Source does appear to be extended
[Wed Jul 11 09:14:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 09:14:39 2012] Source is confused with source 1
[Wed Jul 11 09:14:39 2012] Source is confused with source 2
[Wed Jul 11 17:23:43 2012] Using EEF radius (= 6.99 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 17:23:43 2012] Initial guess for spatial extent in simple fitting = 6.99"
[Wed Jul 11 17:23:43 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.902
[Wed Jul 11 17:23:43 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.99"
[Wed Jul 11 23:20:59 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jul 11 23:20:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src1.csv
[Wed Jul 11 23:20:59 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jul 11 23:20:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src1.csv
[Wed Jul 11 23:20:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 23:21:01 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jul 11 23:21:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Jul 11 23:21:01 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jul 11 23:21:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Jul 11 23:21:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 23:21:30 2012] Spatial fit model total counts = 241607.000000, observed total counts = 212767.000000
[Wed Jul 11 23:21:30 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 11 23:21:30 2012] Spatial fit model total counts = 201179.000000, observed total counts = 224295.000000
[Wed Jul 11 23:21:30 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 11 23:21:30 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 23:21:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 23:21:30 2012] Assessing source extent using major
[Wed Jul 11 23:21:30 2012] Source does appear to be extended
[Wed Jul 11 23:21:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 15:41:47 2012] Counts = 80027.054688, rescaling region sizes by 3.000000
[Thu Jul 12 15:41:47 2012] XMMSAS src. selection expression = ellipse(24578.001221, 25968.102875, 1957.500000, 1957.500000, 0.000000, X, Y)
[Thu Jul 12 15:41:47 2012] Writing source region out to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src3_src.reg
[Thu Jul 12 15:41:47 2012] Extracting stamp from image fullrun_mos2_xmm0136540801_pi300-10000_cl_sm2.00.img.gz, (171, 187) - (396, 412)
[Thu Jul 12 15:41:47 2012] XMMSAS bgd. selection expression = annulus(24578.001221, 25968.102875, 9787.500000, 19575.000000, X, Y) && !ellipse(24502.476257, 25532.837372, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24267.460000, 25175.864800, 3500.136101, 3500.136101, 0.000000, X, Y) && !ellipse(22742.831696, 26981.235504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22630.101807, 27885.323425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25467.839600, 23157.796844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28857.175800, 19496.322000, 1488.608043, 361.754410, 53.419000, X, Y) && !ellipse(22579.859000, 28582.750000, 1283.952037, 1006.320029, 353.373000, X, Y) && !ellipse(29351.130585, 18874.744736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29022.658325, 19280.447815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27856.449982, 20832.524841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28262.621674, 20201.687225, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(27334.765930, 21539.417099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24354.176200, 27934.598000, 1229.928035, 1229.928035, 0.000000, X, Y) && !ellipse(26134.942261, 23196.785950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26577.386000, 22622.738000, 612.219218, 612.219218, 0.000000, X, Y) && !ellipse(30560.765600, 17213.490200, 1700.392049, 435.117613, 52.908000, X, Y) && !ellipse(26994.537201, 21978.839050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30236.155396, 17609.023239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21833.858521, 28110.384949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29902.096954, 18100.961670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27234.304000, 27096.446000, 1180.640034, 1180.640034, 0.000000, X, Y) && !ellipse(35314.183014, 10914.056892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24363.694000, 22076.640000, 1268.632037, 1268.632037, 0.000000, X, Y) && !ellipse(33005.764000, 13887.690000, 1762.752051, 1762.752051, 0.000000, X, Y) && !ellipse(27805.460144, 24762.292114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25639.262000, 22666.248000, 1210.408035, 1210.408035, 0.000000, X, Y) && !ellipse(28380.621720, 26332.732000, 1103.208032, 1103.208032, 0.000000, X, Y) && !ellipse(31553.902191, 15855.031235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32660.640533, 14367.378494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21639.478000, 25808.016000, 1355.776039, 1355.776039, 0.000000, X, Y) && !ellipse(18585.892151, 27609.744659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23768.458893, 28912.185211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35491.090000, 10549.966000, 1644.072047, 1644.072047, 0.000000, X, Y) && !ellipse(21441.196000, 24476.835000, 1375.840040, 1375.840040, 0.000000, X, Y) && !ellipse(34875.250461, 11281.127570, 3585.392103, 567.185477, 53.548462, X, Y) && !ellipse(33731.232598, 12885.894257, 3585.392103, 651.913234, 55.200082, X, Y) && !ellipse(31967.218567, 15244.636017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26503.318000, 28054.888000, 1213.224035, 1213.224035, 0.000000, X, Y) && !ellipse(25982.779877, 28919.489197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24618.734000, 21642.282000, 2119.472061, 2119.472061, 0.000000, X, Y) && !ellipse(18397.950000, 24901.480000, 1514.272044, 1514.272044, 0.000000, X, Y)
[Thu Jul 12 15:41:47 2012] Writing fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src3.gif
[Thu Jul 12 15:42:10 2012] Mean detx,y = (-141.11, -2435.67) 
[Thu Jul 12 15:42:13 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 15:51:07 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 15:51:07 2012] Setting source spectrum file to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jul 12 15:51:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Jul 12 16:50:18 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jul 12 16:50:18 2012] rmf not generated due to insufficient counts
[Thu Jul 12 21:16:09 2012] Updating aperture counts using extracted products
[Thu Jul 12 21:16:10 2012] Error reading totcts from fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jul 12 21:16:12 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 21:16:12 2012] Using photon index=1.80, rate=7.44, arf fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src3.arf
[Thu Jul 12 21:16:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 21:16:12 2012] Updating source flux to 6.5e-11
[Thu Jul 12 21:21:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jul 12 21:25:01 2012] xmm0136540801/analysis//spectral/fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete