[Tue Jul 10 22:01:45 2012] Detection parameters:
  Position = (319.0, 314.8) = 11 4 12.67 38 13 50.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 154.5 +/- 19.9
  Background counts = 65.4
  Rate = 0.02 +/- 0.002

[Tue Jul 10 22:01:46 2012] Off-axis axis estimate = 1.90'
[Wed Jul 11 04:11:33 2012] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 04:11:33 2012] Initial guess for spatial extent in simple fitting = 7.38"
[Wed Jul 11 04:11:33 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.829
[Wed Jul 11 04:11:33 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 7.38"
[Wed Jul 11 09:14:07 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src23.ximg exists
[Wed Jul 11 09:14:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src23.csv
[Wed Jul 11 09:14:07 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src23_1.ximg exists
[Wed Jul 11 09:14:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src23.csv
[Wed Jul 11 09:14:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 09:14:08 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Wed Jul 11 09:14:08 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Wed Jul 11 09:14:09 2012] Fit fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Wed Jul 11 09:14:39 2012] Spatial fit model total counts = 1293.940000, observed total counts = 1292.000000
[Wed Jul 11 09:14:39 2012] Offset between fit and detection position for source 29 = 6.024741 pixels
[Wed Jul 11 09:14:39 2012] 1280.714000 total counts/ 967.843000 bgd. counts: snr = 10.056870
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 6.024741 pixels
  Position = (313.6, 312.0) = 11 4 14.65 38 13 39.7
  Extent = 14.8 (14.7-29.5)", rotation angle = 0
  Source counts = 312.9 +/- 35.8
  Background counts = 967.8
  Rate = 0.03 +/- 0.003
[Wed Jul 11 09:14:39 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 09:14:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 09:14:39 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 09:14:39 2012] Source does appear to be extended
[Wed Jul 11 09:14:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 17:23:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 11 17:23:43 2012] Initial guess for spatial extent in simple fitting = 14.76"
[Wed Jul 11 17:23:43 2012] source mask rpix=3.4, npix_max = 60, mask sum = 56, frac = 0.924
[Wed Jul 11 17:23:43 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 14.76"
[Wed Jul 11 23:21:00 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src21.ximg exists
[Wed Jul 11 23:21:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src21.csv
[Wed Jul 11 23:21:00 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src21_1.ximg exists
[Wed Jul 11 23:21:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src21.csv
[Wed Jul 11 23:21:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 23:21:01 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Wed Jul 11 23:21:01 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Wed Jul 11 23:21:01 2012] Fit fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Wed Jul 11 23:21:30 2012] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 10.253968 pixels away
[Wed Jul 11 23:21:30 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 23:21:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 23:21:30 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 23:21:30 2012] Source does appear to be extended
[Wed Jul 11 23:21:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 15:41:48 2012] XMMSAS src. selection expression = ellipse(27234.304000, 27096.446000, 885.480025, 885.480025, 0.000000, X, Y)
[Thu Jul 12 15:41:48 2012] Writing source region out to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src29_src.reg
[Thu Jul 12 15:41:48 2012] Extracting stamp from image fullrun_mos2_xmm0136540801_pi300-10000_cl_sm2.00.img.gz, (263, 261) - (364, 363)
[Thu Jul 12 15:41:48 2012] XMMSAS bgd. selection expression = annulus(27234.304000, 27096.446000, 1475.800042, 2951.600085, X, Y) && !ellipse(24578.001221, 25968.102875, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24502.476257, 25532.837372, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24267.460000, 25175.864800, 3500.136101, 3500.136101, 0.000000, X, Y) && !ellipse(24354.176200, 27934.598000, 1229.928035, 1229.928035, 0.000000, X, Y) && !ellipse(27805.460144, 24762.292114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28380.621720, 26332.732000, 1103.208032, 1103.208032, 0.000000, X, Y) && !ellipse(23768.458893, 28912.185211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26503.318000, 28054.888000, 1213.224035, 1213.224035, 0.000000, X, Y) && !ellipse(25982.779877, 28919.489197, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 12 15:41:48 2012] Writing fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src29.gif
[Thu Jul 12 16:24:12 2012] Mean detx,y = (2764.23, -1836.92) 
[Thu Jul 12 16:24:13 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 16:24:23 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 16:24:23 2012] Setting source spectrum file to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Thu Jul 12 16:24:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Thu Jul 12 21:16:11 2012] Updating aperture counts using extracted products
[Thu Jul 12 21:16:11 2012] Error reading totcts from fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Thu Jul 12 21:16:12 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 21:16:12 2012] Using photon index=1.80, rate=0.028, arf fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src29.arf
[Thu Jul 12 21:16:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 21:16:12 2012] Updating source flux to 2.7e-13