[Tue Jul 10 22:01:45 2012] Detection parameters:
  Position = (308.1, 328.8) = 11 4 16.69 38 14 57.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.8 +/- 17.2
  Background counts = 65.9
  Rate = 0.009 +/- 0.002

[Tue Jul 10 22:01:46 2012] Off-axis axis estimate = 2.31'
[Wed Jul 11 04:11:33 2012] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 04:11:33 2012] Initial guess for spatial extent in simple fitting = 7.58"
[Wed Jul 11 04:11:33 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.795
[Wed Jul 11 04:11:33 2012] Giving source the simple spatial ID 46 for pass 0, mean size = 7.58"
[Wed Jul 11 09:14:08 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src46.ximg exists
[Wed Jul 11 09:14:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src46.csv
[Wed Jul 11 09:14:08 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src46_1.ximg exists
[Wed Jul 11 09:14:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src46.csv
[Wed Jul 11 09:14:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 09:14:09 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Wed Jul 11 09:14:09 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Wed Jul 11 09:14:09 2012] Fit fullrun_mos2_xmm0136540801_pi300-10000_cl_pass0_tfrozen_src46 appears to have run properly
[Wed Jul 11 09:14:39 2012] Spatial fit model total counts = 1211.620000, observed total counts = 1211.000000
[Wed Jul 11 09:14:39 2012] Offset between fit and detection position for source 19 = 6.435071 pixels
[Wed Jul 11 09:14:39 2012] 1199.626000 total counts/ 938.668000 bgd. counts: snr = 8.517548
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 6.435071 pixels
  Position = (305.2, 323.0) = 11 4 17.76 38 14 27.7
  Extent = 15.2 (15.1-30.3)", rotation angle = 0
  Source counts = 261.0 +/- 34.6
  Background counts = 938.7
  Rate = 0.02 +/- 0.003
[Wed Jul 11 09:14:39 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 09:14:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 09:14:39 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 09:14:39 2012] Source does appear to be extended
[Wed Jul 11 09:14:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 17:23:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 11 17:23:43 2012] Initial guess for spatial extent in simple fitting = 15.17"
[Wed Jul 11 17:23:43 2012] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.007
[Wed Jul 11 17:23:43 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 15.17"
[Wed Jul 11 23:21:00 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src39.ximg exists
[Wed Jul 11 23:21:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src39.csv
[Wed Jul 11 23:21:00 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src39_1.ximg exists
[Wed Jul 11 23:21:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src39.csv
[Wed Jul 11 23:21:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 23:21:01 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Wed Jul 11 23:21:01 2012] fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Wed Jul 11 23:21:01 2012] Fit fullrun_mos2_xmm0136540801_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Wed Jul 11 23:21:30 2012] Warning: source 39 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 13.192635 pixels away
[Wed Jul 11 23:21:30 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 23:21:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 23:21:30 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 23:21:30 2012] Source does appear to be extended
[Wed Jul 11 23:21:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 15:41:48 2012] XMMSAS src. selection expression = ellipse(26503.318000, 28054.888000, 909.918026, 909.918026, 0.000000, X, Y)
[Thu Jul 12 15:41:48 2012] Writing source region out to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src19_src.reg
[Thu Jul 12 15:41:48 2012] Extracting stamp from image fullrun_mos2_xmm0136540801_pi300-10000_cl_sm2.00.img.gz, (253, 271) - (357, 375)
[Thu Jul 12 15:41:48 2012] XMMSAS bgd. selection expression = annulus(26503.318000, 28054.888000, 1516.530044, 3033.060087, X, Y) && !ellipse(24578.001221, 25968.102875, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24502.476257, 25532.837372, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24267.460000, 25175.864800, 3500.136101, 3500.136101, 0.000000, X, Y) && !ellipse(22742.831696, 26981.235504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22630.101807, 27885.323425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22579.859000, 28582.750000, 1283.952037, 1006.320029, 353.373000, X, Y) && !ellipse(24354.176200, 27934.598000, 1229.928035, 1229.928035, 0.000000, X, Y) && !ellipse(27234.304000, 27096.446000, 1180.640034, 1180.640034, 0.000000, X, Y) && !ellipse(27805.460144, 24762.292114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28380.621720, 26332.732000, 1103.208032, 1103.208032, 0.000000, X, Y) && !ellipse(23768.458893, 28912.185211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25982.779877, 28919.489197, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 12 15:41:48 2012] Writing fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src19.gif
[Thu Jul 12 16:38:40 2012] Mean detx,y = (2714.46, -2975.81) 
[Thu Jul 12 16:38:42 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 16:38:57 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 16:38:57 2012] Setting source spectrum file to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu Jul 12 16:38:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Thu Jul 12 21:16:11 2012] Updating aperture counts using extracted products
[Thu Jul 12 21:16:11 2012] Error reading totcts from fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu Jul 12 21:16:13 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 21:16:13 2012] Using photon index=1.80, rate=0.0234, arf fullrun_mos2_xmm0136540801_pi300-10000_pass1_cl_src19.arf
[Thu Jul 12 21:16:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 21:16:13 2012] Updating source flux to 2.3e-13